[1] Qu S G, Wang J T, Hu X F et al. Effect of ultrasonic nanocrystalline surface modification process on fretting wear behavior of laser surface textured 20CrMoH steel[J]. Surface and Coatings Technology, 427, 127827(2021).

[2] Wang J F, Xue W H, Gao S Y et al. Effect of groove surface texture on the fretting wear of Ti‒6Al‒4V alloy[J]. Wear, 486, 204079(2021).

[3] Kirk A M, Sun W, Bennett C J et al. Interaction of displacement amplitude and frequency effects in fretting wear of a high strength steel: impact on debris bed formation and subsurface damage[J]. Wear, 482, 203981(2021).

[4] Wang S, Wang F, Liao Z H et al. Study on torsional fretting wear behavior of a ball-on-socket contact configuration simulating an artificial cervical disk[J]. Materials Science & Engineering C, 55, 22-33(2015).

[5] Liu D X, Liu Y Y, Liu S M et al. Several typical damages of Ti-alloy in aero-components and its control[J]. Aviation Maintenance & Engineering, 22-23, 43(2000).

[6] Li G, Qu S G, Pan Y X et al. Effects of the different frequencies and loads of ultrasonic surface rolling on surface mechanical properties and fretting wear resistance of HIP Ti‒6Al‒4V alloy[J]. Applied Surface Science, 389, 324-334(2016).

[7] Fridrici V, Fouvry S, Kapsa P. Effect of shot peening on the fretting wear of Ti‒6Al‒4V[J]. Wear, 250, 642-649(2001).

[8] Moreno-Rubio M, Erena D, Vázquez J et al. Study of the shot peening surface roughness in fretting[J]. Tribology International, 193, 109444(2024).

[9] Fang X Y, Gong J N, Yu Y Q et al. Study on the fretting wear performance and mechanism of GH4169 superalloy after various laser shock peening treatments[J]. Optics & Laser Technology, 170, 110301(2024).

[10] Li C, Amanov A, Wang C et al. Effect of laser shock peening on fretting wear behaviour of AISI 304 stainless alloy[J]. Tribology International, 193, 109386(2024).

[11] Narayana T, Saleem S S. Enhancing fretting wear behavior of Ti64 alloy: the impact of surface textures and CrN-MoS2-Ag composite coating[J]. Tribology International, 193, 109346(2024).

[12] Gachot C, Rosenkranz A, Hsu S M et al. A critical assessment of surface texturing for friction and wear improvement[J]. Wear, 372, 21-41(2017).

[13] Ma L J, Han Z B. Research progress on anti-friction properties of textured surface of mechanical parts[J]. Lubrication Engineering, 48, 163-177(2023).

[14] Zhao L X, Zhang B L, Liu Y et al. State of the art for improving tribological performance based on of surface texturing technology[J]. Tribology, 42, 202-224(2022).

[15] Qi Y, Chang Q Y, Wang B et al. Research on tribological behaviors of laser surface textures under dry sliding[J]. Acta Armamentarii, 36, 200-205(2015).

[16] Wang R Z, Zhu L N, Yue W et al. Research status of compound treatment of laser surface texturing and solid lubrication technology to improve surface tribological properties[J]. Materials Protection, 52, 110-115(2019).

[17] Lu J J. Study on laser ablation micro texture to improve the friction performance of axial piston[D](2022).

[18] Li B L. Fabrication of friction reduced surface structures for artificial hip joints using laser interference[D](2016).

[19] Li K M. A study of fabrication method and tribological performance of micro dimple based on laser shock processing[D](2015).

[20] Liao X L, Su B Y, Xu S et al. Flow law of plastic deformation of TC4 titanium alloy by laser shock peening[J]. Chinese Journal of Lasers, 50, 1602206(2023).

[21] Mao B, Siddaiah A, Liao Y L et al. Laser surface texturing and related techniques for enhancing tribological performance of engineering materials: a review[J]. Journal of Manufacturing Processes, 53, 153-173(2020).

[22] Hua G R, Zhou D C, Cao Y P et al. Research progress of quantitatively controlling surface residual stress by laser shock processing[J]. Laser & Optoelectronics Progress, 53, 100001(2016).

[23] Lu Y, Zhao J B, Qiao H C et al. Effects of laser peening on micro-structure distributions and deformation microstructure of TiAl[J]. Acta Optica Sinica, 34, s114007(2014).

[24] Wang B H, Cheng L, Li D C. Microstructure evolution and nanocrystal formation of TC4 by laser shock peening[J]. Chinese Journal of Lasers, 49, 0802019(2022).

[25] Kumar D, Akhtar S N, Patel A K et al. Tribological performance of laser peened Ti‒6Al‒4V[J]. Wear, 322/323, 203-217(2015).

[26] Kumar S A, Sundar R, Raman S G S et al. Fretting wear behavior of laser peened Ti‒6Al‒4V[J]. Tribology Transactions, 55, 615-623(2012).

[27] Guo Y B, Caslaru R. Fabrication and characterization of micro dent arrays produced by laser shock peening on titanium Ti‒6Al‒4V surfaces[J]. Journal of Materials Processing Technology, 211, 729-736(2011).

[28] Li K M, Hu Y X, Yao Z Q. Experimental study of micro dimple fabrication based on laser shock processing[J]. Optics & Laser Technology, 48, 216-225(2013).

[29] Li K M, Yao Z Q, Hu Y X et al. Friction and wear performance of laser peen textured surface under starved lubrication[J]. Tribology International, 77, 97-105(2014).

[30] Xing Y Q, Wang X S, Du Z H et al. Synergistic effect of surface textures and DLC coatings for enhancing friction and wear performances of Si3N4/TiC ceramic[J]. Ceramics International, 48, 514-524(2022).

[31] Zhang E G, Zhang Z F, Zhou Q et al. Effects of two DLC coatings on dry milling performance of ZL108 aluminum alloy[J]. Surface Technology, 49, 356-363(2020).

[32] Sharifahmadian O, Pakseresht A, Mosas K K A et al. Doping effects on the tribological performance of diamond-like carbon coatings: a review[J]. Journal of Materials Research and Technology, 27, 7748-7765(2023).

[33] Tillmann W, Dias N F L, Stangier D. Influence of plasma nitriding pretreatments on the tribo-mechanical properties of DLC coatings sputtered on AISI H11[J]. Surface and Coatings Technology, 357, 1027-1036(2019).

[34] Lu P, Wood R J K, Gee M G et al. The friction reducing effect of square-shaped surface textures under lubricated line-contacts: an experimental study[J]. Lubricants, 4, 26(2016).

[35] Du D X, Liu D X, Ye Z Y et al. Fretting wear and fretting fatigue behaviors of diamond-like carbon and graphite-like carbon films deposited on Ti‒6Al‒4V alloy[J]. Applied Surface Science, 313, 462-469(2014).

[36] Drory M D, Hutchinson J W. Measurement of the adhesion of a brittle film on a ductile substrate by indentation[J]. Proceedings of the Royal Society of London Series A: Mathematical, Physical and Engineering Sciences, 452, 2319-2341(1996).

[37] Su Z B, Xiang D H, Li Y Q et al. Effects of laser surface modification of cemented carbide and bionic microtexture on properties of boron-doped diamond coatings[J]. Surface Technology, 52, 384-396(2023).

[38] Zhang H P, Cai Z Y, Chi J X et al. Gradient microstructure evolution in laser shock peened Ti6Al4V titanium alloy[J]. Surface and Coatings Technology, 437, 128378(2022).

[39] Kovacı H, Yetim A F, Baran Ö et al. Fatigue crack growth behavior of DLC coated AISI 4140 steel under constant and variable amplitude loading conditions[J]. Surface and Coatings Technology, 304, 316-324(2016).