[1] [1] CHOI J W, LIU H H, USHIODA K, et al. Effect of an Al filler material on interfacial microstructure and mechanical properties of dissimilar friction stir welded Ti/Mg joint［J］. Materials Characterization, 2019, 155: 109801.

[2] [2] ZHOU X K, MI G Y, LIU S, et al. Laser lap welding of 304 stainless steel/T2 red copper ultra-thin sheets［J］. Chinese Journal of Lasers, 2017, 44(8): 0802006.

[3] [3] LI C L, FAN D, YU X Q, et al. Method of arc-assisted laser wire welding-brazing between aluminum and galvanized steel with filler powder［J］. Chinese Journal of Lasers, 2016, 43(7): 0702007.

[4] [4] TAN C W, HUANG Y H, CHEN B, et al. Microstructure and thermodynamic behavior of laser welded-brazed Mg/Ti dissimilar joint［J］. Chinese Journal of Lasers, 2016, 43(3): 0303009.

[5] [5] YE Y, FEI X J, LI J, et al. Numerical simulation investigation on friction stir welding with laser-assisted heating between steel and aluminum［J］. Applied Laser, 2018, 38(4): 601-609.

[6] [6] GUO S, PENG Y, CUI C, et al. Microstructure and mechanical characterization of re-melted Ti6Al4V and AlMgSi alloys butt weld［J］. Vacuum, 2018, 154: 58-67.

[7] [7] LI H J. Process and mechanism research of welding-brazed TA2 pure titanium to 2024 aluminum alloy joint based on space electron beam heat source［D］. Harbin: Harbin Institute of Technology, 2016: 17-55.

[8] [8] LI M A. Effect of boron or carbon on the high temperature deformation microstructure and mechanical properties of TiAl alloy［D］. Harbin: Harbin Institute of Technology, 2019: 1-51.

[9] [9] MA Z P, YU X L, MENG Q W. Microstructure and fracture behavior of arc welding-brazing joints between titanium and aluminum dissimilar alloys［J］. The Chinese Journal of Nonferrous Metals, 2015, 25(11): 3067-3076.

[10] [10] ZHANG Y F. Microstructure and performance control of Ti-Al dissimilar metal but joints by MIG / TIG double-side arc welding-brazing［D］. Beijing: University of Science and Technology Beijing, 2017: 43-71.

[11] [11] GUO L, WU Z H, CHEN Y, et al. Effect of scanning speed on laser welding quality of Ti/Al dissimilar alloys［J］. Applied Laser, 2018, 38(2): 230-235.

[12] [12] KALAISELVAN K, ELANGO A, NAGARAJAN N M, et al. Studies oncharacteristics of Ti6Al4V/AA2024 dissimilar weld joint using laser beam focusing from AA2024 side［J］. Transactions of the Indian Institute of Metals, 2017, 70(8): 2147-2153.

[13] [13] CASALINO G, D’OSTUNI S, GUGLIELMI P, et al. Off-set and focus effects on grade 5 titanium to 6061 aluminum alloy fiber laser weld［J］. Materials, 2018, 11(11): 2337.

[14] [14] LI P, LEI Z L, ZHANG X R, et al. Effects of laser power on the interfacial intermetallic compounds and mechanical properties of dual-spot laser welded-brazed Ti/Al butt joint［J］. Optics & Laser Technology, 2020, 124: 105987.

[15] [15] CHEN S H, LI L Q, CHEN Y B, et al. Joining mechanism of Ti/Al dissimilar alloys during laser welding-brazing process［J］. Journal of Alloys and Compounds, 2011, 509(3): 891-898.