[1] zhang S Y, Zhang D, Tu Q H et al. Research on the optimal design and manufacture of TC4 titanium alloy structural parts with selective laser melting technology[J]. Proceedings of SPIE, 12595, 1259519(2023).

[2] Liu J, Dong S Y, Jin X et al. Quality control of large-sized alloy steel parts fabricated by multi-laser selective laser melting (ML-SLM)[J]. Materials Design, 223, 111209(2022).

[3] Lin X, Huang W D. High performance metal additive manufacturing technology applied in aviation field[J]. Materials China, 34, 684-688, 658(2015).

[4] Aboulkhair N T, Simonelli M, Parry L et al. 3D printing of aluminium alloys: additive manufacturing of aluminium alloys using selective laser melting[J]. Progress in Materials Science, 106, 100578(2019).

[5] Zong X W, Liu W J, Zhang S Z et al. Microstructure and crystal orientation of nickel-based superalloy GH3536 by selective laser melting[J]. Rare Metal Materials and Engineering, 49, 3182-3188(2020).

[6] Zhu L L, Ruan H H, Chen A Y et al. Microstructures-based constitutive analysis for mechanical properties of gradient-nanostructured 304 stainless steels[J]. Acta Materialia, 128, 375-390(2017).

[7] Feng X G, Lu X Y, Zuo Y et al. The effect of deformation on metastable pitting of 304 stainless steel in chloride contaminated concrete pore solution[J]. Corrosion Science, 103, 223-229(2016).

[8] Azari M, Rasti E, Dehkordi M H R et al. Investigation of temperature distribution and melt pool microstructure in laser fusion welding of Inconel 625 superalloy[J]. Journal of Laser Applications, 33, 022015(2021).

[9] Hu X A, Xue Z Y, Zhao G L et al. Laser welding of a selective laser melted Ni-base superalloy: microstructure and high temperature mechanical property[J]. Materials Science and Engineering: A, 745, 335-345(2019).

[10] Hong M, Wang S L, Sun W J et al. Effect of welding speed on microstructure and mechanical properties of selective laser melting Inconel 625 alloy laser welded joint[J]. Journal of Materials Research and Technology, 19, 2093-2103(2022).

[11] Zhang Y, Hu X A, Jiang Y. Study on the microstructure and fatigue behavior of a laser-welded Ni-based alloy manufactured by selective laser melting method[J]. Journal of Materials Engineering and Performance, 29, 2957-2968(2020).

[12] Ding H D, Zhu C M, Tang B et al. Microstructure and properties of laser welded joint between 316L stainless steel SLMed and forged parts[J]. Welding Joining, 9-14, 63(2021).

[13] Yang J J, Wang Y, Li F Z et al. Weldability, microstructure and mechanical properties of laser-welded selective laser melted 304 stainless steel joints[J]. Journal of Materials Science Technology, 35, 1817-1824(2019).

[14] Cheng Z W, Qi B X, Zhang T et al. Research on fiber laser butt welding process of 3D-GH3536/R-GH3128 dissimilar superalloy[J]. Chinese Journal of Lasers, 49, 2202013(2022).

[15] Du X, Wu Q, Zhang T et al. Microstructure and mechanical properties of laser butt welds of selective laser melted Ta10W alloy plates with different forming directions[J]. Journal of Materials Research and Technology, 26, 8097-8110(2023).

[16] Ren X, Liu H L, Lu F Y et al. Effects of processing parameters on the densification, microstructure and mechanical properties of pure tungsten fabricated by optimized selective laser melting: from single and multiple scan tracks to bulk parts[J]. International Journal of Refractory Metals and Hard Materials, 96, 105490(2021).

[17] Bahl S, Mishra S, Yazar K U et al. Non-equilibrium microstructure, crystallographic texture and morphological texture synergistically result in unusual mechanical properties of 3D printed 316L stainless steel[J]. Additive Manufacturing, 28, 65-77(2019).

[18] Ahmad G N, Raza M S, Singh N K et al. Experimental investigation on Ytterbium fiber laser butt welding of Inconel 625 and Duplex stainless steel 2205 thin sheets[J]. Optics Laser Technology, 126, 106117(2020).

[19] Li G, Huang J, Wu Y X. An investigation on microstructure and properties of dissimilar welded Inconel 625 and SUS 304 using high-power CO2 laser[J]. The International Journal of Advanced Manufacturing Technology, 76, 1203-1214(2015).

[20] Cui Y, Xu C L, Han Q. Effect of ultrasonic vibration on unmixed zone formation[J]. Scripta Materialia, 55, 975-978(2006).

[21] Zhou S Y, Chai D S, Yu J L et al. Microstructure characteristic and mechanical property of pulsed laser lap-welded nickel-based superalloy and stainless steel[J]. Journal of Manufacturing Processes, 25, 220-226(2017).

[22] Kumar A, Pandey C. Autogenous laser-welded dissimilar joint of ferritic/martensitic P92 steel and Inconel 617 alloy: mechanism, microstructure, and mechanical properties[J]. Archives of Civil and Mechanical Engineering, 22, 39(2022).

[23] Chen G Q, Yin Q X, Shu X et al. Microstructure and properties of electron beam welded joints of tantalum and tungsten[J]. Welding in the World, 62, 775-782(2018).

[24] Zhang G, Chen G Q, Cao H et al. Crack generation mechanism and control method of electron beam welded Nb/GH3128 joint[J]. Journal of Materials Processing Technology, 299, 117355(2022).

[25] Jeyaprakash N, Yang C H, Ramkumar K R. Correlation of microstructural evolution with mechanical and tribological behaviour of SS 304 specimens developed through SLM technique[J]. Metals and Materials International, 27, 5179-5190(2021).

[26] Adomako N K, Park H J, Cha S C et al. Microstructure evolution and mechanical properties of the dissimilar joint between IN718 and STS304[J]. Materials Science and Engineering: A, 799, 140262(2021).