[1] [1] WEN D B, ZHU D Zh, ZHAN Q Q, et al. Properties of medium and low volume fraction SiC reinforced aluminum matrix composites［J］. Special-cast and Non-ferrous Alloys, 2020, 40(6): 667-672(in Chinese).

[2] [2] ZHU P F, XIE J P, WANG A Q, et al. Research status of SiC/Al composites prepared by powder metallurgy［J］. Powder Metallurgy Industry, 2016, 26(5): 48-56(in Chinese).

[3] [3] ZHANG W Y. Present status and development of metal matrix composites［J］. The Magazine on Equipment Machinery, 2017(2): 79-83(in Chinese).

[4] [4] TAN H L, WANG C R. Research on application of numerical control milling in silicon carbide particle reinforced aluminum matrix composites［J］. Internal Combustion Engine & Parts, 2019(21): 93-94 (in Chinese).

[5] [5] HUO Sh Y, XIE L J, XIANG J F, et al. Research progress on ultra-precision machining of silicon carbide and its particle-reinforced aluminum matrix composites［J］. Tool Engineering, 2018, 52(10): 3-12(in Chinese).

[6] [6] SALUR E, ASLAN A, KUNTOGLU M, et al. Experimental study and analysis of machinability characteristics of metal matrix composites during drilling［J］. Composites, 2019, B166: 401-413.

[7] [7] BASAVARAJAPPA S, CHANDRAMOHAN G, PRABU M, et al. Drilling of hybrid metal matrix composites-workpiece surface integrity［J］. International Journal of Machine Tools & Manufacture, 2007, 47(1): 92-96.

[8] [8] KUMAR P, KUMAR B P V, JOSHI R, et al. Evaluation of Al7075 reinforced with SiC for its mechanical properties & surface roughness by drilling［J］. Materials Today: Proceedings, 2018, 5(11): 25121-25129.

[9] [9] KONG X, YANG L, ZHANG H, et al. Optimization of surface roughness in laser-assisted machining of metal matrix composites using taguchi method［J］. International Journal of Advanced Manufacturing Technology, 2017, 89(1/4): 529-542.

[10] [10] ZHANG T Zh. Study on the mechanism of melt ejection, recast layer and micro crack formation in millisecond laser drilling［D］. Nanjing: Nanjing University of Science and Technology, 2017: 40-59(in Chinese).

[11] [11] MARIMUTHU S, DUNLEAVEY J, LIU Y, et al. Characteristics of hole formation during laser drilling of SiC reinforced aluminium metal matrix composites［J］. Journal of Materials Processing Technology, 2019, 271: 554-567.

[12] [12] SARFRAZ S, SHEHAB E, SALONITIS K, et al. Experimental Investigation of productivity, specific energy consumption, and hole quality in single-pulse, percussion, and trepanning drilling of IN718 superalloy［J］. Energies, 2019, 12(24): 1-25.

[13] [13] JIANG H T, YANG Z X, ZHAO W Q, et al. Research on nanosecond pulse laser drilling processing of alumina ceramic substrate［J］. Electro-Mechanical Engineering, 2020, 36(4): 39-44(in Chinese).

[14] [14] JIANG Y, CHEN G Y, ZHOU C, et al. Research of carbon fiber reinforced plastic cut by picosecond laser［J］. Laser Technology, 2017, 41(6): 821-825(in Chinese).

[15] [15] GAO J, CHEN Sh M, WANG K H, et al. Research on the influence of laser power on laser-MIG hybird weld forming［J］. Laser Technology, 2020, 44(2): 178-182(in Chinese).

[16] [16] MORAR N I, ROY R, MEHEN J, et al. Investigation of recast and crack formation in laser trepanning drilling of CMSX-4 angled holes［J］. The International Journal of Advanced Manufacturing Technology, 2018, 95(9): 4059-4070.

[17] [17] SUN Sh F, LIAO H P, WU X H, et al. Experimental study about micro processing by picosecond laser［J］. Laser Technology, 2018, 42(2): 234-238(in Chinese).

[18] [18] ZHANG H Zh. Study on pulsed laser ablation of silicon carbide particulate reinforced aluminum matrix composite［D］. Beijing: Beijing University of Technology, 2018: 25-57(in Chinese).

[19] [19] WANG Y Ch, ZHAO W Q, WANG L Zh, et al. Research on drilling of micro-hole in metal by using picosecond ultrashort pulse laser［J］. Machine Design & Research, 2019, 35(5): 70-74(in Chinese).

[20] [20] MARIMUTHUA S, KAMARA A M, SEZER H K, et al. Numerical investigation on laser stripping of thermal barrier coating［J］. Computational Materials Science, 2014, 88: 131-138.

[21] [21] WANG Ch Ch, CHOW H M, DAI Y L, et al. Recast layer removal after electrical discharge machining via taguchi analysis: A feasibility study［J］. Journal of Materials Processing Technology, 2009, 209(8): 4134-4140.