Journal of Inorganic Materials, Volume. 35, Issue 4, 399(2020)
References(47)
[1] KRSTIC Z. Silicon nitride: the engineering material of the future[D]. J. Mater. Sci., 47, 535-552(2012).
[2] LAUNEY M E, RITCHIE R O. On the fracture toughness of advanced materials[D]. Adv. Mater., 21, 2103-2110(2009).
[3] GUO J K. Stress design of ceramic grain boundary[D]. J. Inorg. Mater., 1, 27-31(1995).
[4] GOHARDANI A S, GOHARDANI O. Ceramic engine considerations for future aerospace propulsion[D]. Aircr. Eng. Aerosp. Tec., 84, 75-86(2012).
[5] GARVIE R C, HANNINK R H, PASCOE R T. Ceramic steel?[D]. Nature, 258, 703-704(1975).
[6] JOHNSTON R D, CHIPMAN R D, KNAPP W J. Prestressed ceramics as a structural material[D]. J. Am. Ceram. Soc., 36, 121-126(1953).
[7] GREEN D J. Crack arrest and multiple cracking in glass through the use of designed residual stress profiles[D]. Science, 283, 1295-1297(1999).
[8] WONDRACZEK L, MAURO J C, ECKERT J et al. Towards ultrastrong glasses[D]. Adv. Mater., 23, 4578-4586(2011).
[9] INSLEY R H, BARCZAK V J. Thermal conditioning of polycrystalline alumina ceramics[D]. J. Am. Ceram. Soc., 47, 1-4(2006).
[10] CHEN L, WANG A, XIANGBO S et al. Effect of surface heat transfer coefficient gradient on thermal shock failure of ceramic materials under rapid cooling condition[D]. Ceram. Int., 44, 8992-8999(2018).
[11] BARBI S, MUGONI C, MONTORSI M et al. Chemical hardening of glazed porcelain tiles[D]. J. Am. Ceram. Soc., 102, 2853-2862(2019).
[12] SHAN Z, LIU J, SHI F et al. A new strengthening theory for improving the fracture strength of lithium disilicate glass-ceramics by introducing Rb or Cs ions[D]. J. Non-Cryst. Solids, 481, 479-485(2018).
[13] RICHERSON D W, DEKKER M. Modern ceramic engineering, process, processing and use in design[D]. New York, 2nd edition revised, 21-33(1992).
[14] GRIFFITH A A. The phenomena of rupture and flow in solids[D]. Phil. Trans., 221, 163-198(1921).
[16] MESSING G L, STEVENSON A J. Toward pore-free ceramics[D]. Science, 322, 383-384(2008).
[17] ALFORD N M, BIRCHALL J D, KENDALL K. High-strength ceramics through colloidal control to remove defects[D]. Nature, 330, 51-53(1987).
[18] WANG W, FU Z, WANG H et al. Influence of hot pressing sintering temperature and time on microstructure and mechanical properties of TiB2 ceramics[D]. J. Eur. Ceram. Soc., 22, 1045-1049(2002).
[19] HUANG Y H, JIANG D L, ZHANG X F et al. Enhancing toughness and strength of SiC ceramics with reduced graphene oxide by HP sintering[D]. J. Eur. Ceram. Soc., 38, 4329-4337(2018).
[20] HAN Y, LI S, ZHU T et al. An oscillatory pressure sintering of zirconia powder: densification trajectories and mechanical properties[D]. J. Am. Ceram. Soc., 101, 1824-1829(2018).
[21] LI S, XIE Z P, XUE W J. Microstructure and mechanical properties of zirconia ceramics consolidated by a novel oscillatory pressure sintering[D]. Ceram. Int., 41, 10281-10286(2015).
[22] LI S, XIE Z P. Preparation of zirconia ceramics with high density and fine grains by oscillatory pressure sintering[D]. J. Inorg. Mater., 31, 207-212(2016).
[23] ZHU T, XIE Z, HAN Y et al. Improved mechanical properties of Al2O3-25vol% SiCw composites prepared by oscillatory pressure sintering[D]. Ceram. Int., 43, 15437-15441(2017).
[24] et alStructural evolution and the Hall-Petch relationship in an Al-Mg-Li-Zr alloy with ultra-fine grain size[D]. Acta Mater., 45, 4751-4757(1997).
[25] HIRATA Y, SUZUE N, MATSUNAGA N et al. Particle size effect of starting SiC on processing, microstructures and mechanical properties of liquid phase-sintered SiC[D]. J. Eur. Ceram. Soc., 30, 1945-1954(2010).
[27] ZhAN G D, KUNTZ J D, WAN J et al. Single-wall carbon nanotubes as attractive toughening agents in alumina-based nanocomposites[D]. Nat. Mater., 2, 38-42(2003).
[28] PADTURE N P. Multifunctional composites of ceramics and single walled carbon nanotubes[D]. Adv. Mater., 21, 1767-1770(2010).
[29] OSTEEN K G, BRUNER K L, ONG D et al. Single-crystal SiC nanowires with a thin carbon coating for stronger and tougher ceramic composites[D]. Adv. Mater., 17, 1519-1523(2010).
[30] ZHANG L, BEN Y, WU J et al. Alumina assisted grain refinement and physical performance enhancement of yttria transparent ceramics by two-step sintering[D]. Mat. Sci. Eng. A, 684, 466-469(2017).
[31] FISHER E S, MANGHNANI M H, WANG J F et al. Elastic properties of Al2O3 and Si3N4 matrix composites with SiC whisker reinforcement[D]. J. Am. Ceram. Soc., 75, 908-914(1992).
[32] KHODAEIA M, YAGHOBIZADEHB O, ALHOSSEINI S H N et al. The effect of oxide, carbide, nitride and boride additives on properties of pressureless sintered SiC: a review[D]. J. Eur. Ceram. Soc., 39, 2215-2231(2019).
[33] KUMAR S, SAIRAM K, SONBER J K et al. Hot-pressing of MoSi2, reinforced B4C composites[D]. Ceram. Int., 40, 16099-16105(2014).
[34] YU H, CHEN Y, GUO X et al. Study on mechanical properties of hot pressing sintered mullite-ZrO2 composites with finite element method[D]. Ceram. Int., 44, 7509-7514(2018).
[35] GUO X, YANG H, ZHANG L et al. Sintering behavior, microstructure and mechanical properties of silicon carbide ceramics containing different nano-TiN additive[D]. Ceram. Int., 36, 161-165(2010).
[36] DING Y, DONG S, ZHOU Q et al. Preparation of C/SiC composites by hot pressing, using different C fiber content as reinforcement[D]. J. Am. Ceram. Soc., 89, 1447-1449(2006).
[37] CHEN X, LI T, REN Q et al. Mullite whisker network reinforced ceramic with high strength and lightweight[D]. J. Alloy Compd., 700, 37-42(2017).
[39] NAWY E. Reinforced concrete: a fundamental approach[D]. Prentice-Hall, 2nd edition revised, 1-15(1996).
[40] MAURO J C, PHILIP C S, VAUGHN D J et al. Glass science in the united states: current status and future directions[D]. Int. J. Appl. Glass. Sci., 5, 2-15(2014).
[41] OLCOTT J S. Chemical strengthening of glass[D]. Science, 140, 1189-1193(1963).
[42] CHAUDHRI M M, LIANGYI C. The catastrophic failure of thermally tempered glass caused by small-particle impact[D]. Nature, 320, 48-50(1986).
[44] AURELIO I L, DORNELES L S, MAY L G. Extended glaze firing on ceramics for hard machining: crack healing, residual stresses, optical and microstructural aspects[D]. Dent Mater., 33, 226-240(2017).
[45] SHAN Z, LIU J, LIU M et al. Surface strengthening of lithium disilicate glass-ceramic by ion-exchange using Rb, Cs nitrates[D]. Ceram. Int., 44, 12466-12471(2018).
[46] DAL BÓ M, DOMINGUINI L, ZIMMER A et al. Chemical tempering of porcelain tiles[D]. Ceram. Int., 42, 15199-15202(2016).
[47] SONG J, YANG H, BERMEJO R et al. Enhanced thermal shock response of Al2O3-graphite composites through a layered architectural design[D]. J. Am. Ceram. Soc., 102, 3673-3684(2019).
[48] QIAN S, LIU F, MA M et al. Mechanical strength enhancement of low temperature co-fired multilayer ceramic substrates by introducing residual stress[D]. Ceram. Int., 45, 10982-10990(2019).
[49] BAO Y, SU S, YANG J et al. Pre-stressed ceramics and improvement of impact resistance[D]. Mater. Lett., 57, 518-524(2002).
[51] BAO Y, KUANG F, SUN Y et al. A simple way to make pre-stressed ceramics with high strength[D]. J. Materiomics., 5, 657-662(2019).
[52] ASHBY, M F. Materials Selection in Mechanical Design[D]. Oxford, 4th edition revised, 60-68(2011).
Tools
Get Citation
Copy Citation Text
Yiwang BAO, Yi SUN, Fenghua KUANG, Yueming LI, Detian WAN.
Paper Information
Category: REVIEW
Received: Jul. 17, 2019
Accepted: --
Published Online: Mar. 1, 2021
The Author Email:
© Copyright 2018-2021 | Chinese Laser Press.
All Rights Reserved 沪ICP备15018463号-20