[1] [1] KOCH J, MAZUMDER J. Rapid prototyping by laser cladding［J］. Proceedings of the SPIE, 1994, 2306: 556.

[2] [2] MURPHY M L, STEEN W M, LEE C A. Novel prototyping technique for the manufacture of metallic components［C］// Proceeding of ICALEO’1994. Orlanda,USA: Laser Institute of America, 1994: 31-40.

[3] [3] XIONG Y H, SMUGERESRY J E, AJDELSZTAJN L, et al. Fabrication of WC-Co cermets by 1aser engineered net shaping［J］. Materials Science and Engineering, 2008, A493(1/2):261-266.

[4] [4] QIU C L, RAVI G A, DANCE C, et al. Fabrication of large Ti-6AI-4V structures by direct laser deposition［J］. Journal of Alloys and Compounds,2015,629:35l-361.

[5] [5] ZHONG M L, NING G Q, LIN W J. Research and development on laser direct manufacturing metallic components［J］. Laser Technology, 2002, 26(5):388-391(in Chinese).

[6] [6] HUANG S H, LIU P, MOKASDAR A, et al. Additive manufacturing and its societal impact: A literature review［J］. International Journal of Advanced Manufacturing Technology, 2013, 67(5/8):1191-1203.

[7] [7] FRAZIER W E. Metal additive manufacturing: A review［J］. Journal of Materials Engineering & Performance, 2014, 23(6):1917-1928．

[8] [8] GUO N, LEU M C. Additive manufacturing: Technology, applications and research needs［J］. Frontiers of Mechanical Engineering, 2013, 8(3):215-243．

[9] [9] TABERNERO I, LAMIKIZ A, UKAR E, et al. Numerical simulation and experimental validation of powder flux distribution in coaxial laser cladding［J］. Journal of Materials Processing Technology, 2010, 210(15):2125-2134.

[10] [10] KUMAR A, PAUL C P, PADIYAR A S, et al. Numerical simulation of laser rapid manufacturing of multi-layer thin wall using an improved mass addition approach［J］. Numerical Heat Transfer, 2014, A65(9):885-910.

[11] [11] GU D, MEINERS W, WISSENBACH K, et al. Laser additive manufacturing of metallic components: Materials［J］. Processes and Mechanisms, 2012, 57(3):133-164.

[12] [12] CONG W, NING F. A fundamental investigation on ultrasonic vibration-assisted laser engineered net shaping of stainless steel［J］. International Journal of Machine Tools & Manufacture, 2017, 121:61-69.

[13] [13] NARKHADE S S, RATHI M G. Additive manufacturing of metals: A review ［J］.Journal of Advances in Science and Technology, 2017, 13(1): 253-258.

[14] [14] DEBROY T, WEI H L, ZUBACK J S, et al. Additive manufacturing of metallic components—process, structure and properties ［J］. Progress in Materials Science, 2018, 92:112-224.

[15] [15] HERZOG D, SEYDA V, WYCISK E, et al. Additive manufacturing of metals ［J］.Acta Materialia,2016,117:371-392.

[16] [16] LIU R Ch, YANG Y Q, WANG D. Research of upper surface roughness of metal parts fabricated by selective laser melting ［J］. Laser Technology, 2013, 37(4):425-430(in Chinese).

[17] [17] TAN H, HU G, ZHANG F Y, et al. Formation mechanism of adhering powder and improvement of the surface quality during laser solid forming ［J］. International Journal of Advanced Manufacturing, 2016, 86(5/8):1329-1338

[18] [18] GHARBI M, PEYRE P, GORNY C, et al. Influence of various process conditions on surface finishes induced by the direct metal deposition laser technique on a Ti-6Al-4V alloy［J］. Journal of Materials Processing Technology, 2013, 213(5):791-800.

[19] [19] GHARBI M, PEYRE P, GORNY C, et al. Influence of process conditions on surface finishes obtained with the direct metal deposition laser technique［J］.Journal of Materials Processing Technology, 2013,213(5):791-800.

[20] [20] YUAN F B, WEI H Y, HUANG C, et al. The Taguchi experimental investigation on process energy efficiency of laser direct metal deposition ［J］. Laser Technology, 2018, 42(1):24-29 (in Chinese).