[1] Joannopoulos J D, Johnson S G, Winn J N et al[M]. Photonic crystals: molding the flow of light(2008).

[2] Liu D, Citrin D S, Hu S. Compact high-performance polarization beam splitter based on a silicon photonic crystal heterojunction[J]. Optical Materials, 109, 110256(2020).

[3] Razmi H, Soroosh M, Kavian Y S. A new proposal for ultra-compact polarization independent power splitter based on photonic crystal structures[J]. Journal of Optical Communications, 39, 375-379(2018).

[4] Swarnakar S, Rathi S, Kumar S. Design of all optical XOR gate based on photonic crystal ring resonator[J]. Journal of Optical Communications, 41, 51-56(2019).

[5] Zhang Y, Li B J. Photonic crystal-based bending waveguides for optical interconnections[J]. Optics Express, 14, 5723-5732(2006).

[6] Ma G H, Shen J, Zhang Z J et al. Ultrafast all-optical switching in one-dimensional photonic crystal with two defects[J]. Optics Express, 14, 858-865(2006).

[7] Teo S H, Liu A Q, Zhang J B et al. Photonic bandgap crystal resonator enhanced, laser controlled modulations of optical interconnects for photonic integrated circuits[J]. Optics Express, 16, 7842-7848(2008).

[8] Lin S Y, Fleming J G, Hetherington D L et al. A three-dimensional photonic crystal operating at infrared wavelengths[J]. Nature, 394, 251-253(1998).

[9] Rinne S A, García-Santamaría F, Braun P V. Embedded cavities and waveguides in three-dimensional silicon photonic crystals[J]. Nature Photonics, 2, 52-56(2008).

[10] Takahashi S, Suzuki K, Okano M et al. Direct creation of three-dimensional photonic crystals by a top-down approach[J]. Nature Materials, 8, 721-725(2009).

[11] Anscombe N. Direct laser writing[J]. Nature Photonics, 4, 22-23(2010).

[12] Lu C, Lipson R H. Interference lithography: a powerful tool for fabricating periodic structures[J]. Laser & Photonics Reviews, 4, 568-580(2010).

[13] Ito T, Okazaki S. Pushing the limits of lithography[J]. Nature, 406, 1027-1031(2000).

[14] Guo L J. Nanoimprint lithography: methods and material requirements[J]. Advanced Materials, 19, 495-513(2007).

[15] Vieu C, Carcenac F, Pépin A et al. Electron beam lithography: resolution limits and applications[J]. Applied Surface Science, 164, 111-117(2000).

[16] Melngailis J. Focused ion beam lithography[J]. Nuclear Instruments and Methods in Physics Research Section B: Beam Interactions with Materials and Atoms, 80/81, 1271-1280(1993).

[17] Song Q H, Liu L Y, Wang W C et al. Experimental study on photonic bandgap extension in heterostructural photonic crystals[J]. Proceedings of SPIE, 5061, 232-236(2003).

[18] Yang D P, Hu Y, Ma D K et al. Reconfigurable mechanochromic patterns into chameleon-inspired photonic papers[J]. Research, 2022, 9838071(2022).

[19] Fu Q Q, Ge J P, Chen C et al. High-precision colorimetric sensing by dynamic tracking of solvent diffusion in hollow-sphere photonic crystals research[J]. Research, 2022, 9813537(2022).

[20] Yablonovitch E. Inhibited spontaneous emission in solid-state physics and electronics[J]. Physical Review Letters, 58, 2059-2062(1987).

[21] John S. Strong localization of photons in certain disordered dielectric superlattices[J]. Physical Review Letters, 58, 2486-2489(1987).

[22] Ma X Y[M]. The principle and application of photonic crystal, 25-32(2010).

[23] Yablonovitch E. Photonic band-gap structures[J]. Journal of the Optical Society of America B, 10, 283-295(1993).

[24] Gralak B, Tayeb G, Enoch S. Morpho butterflies wings color modeled with lamellar grating theory[J]. Optics Express, 9, 567-578(2001).

[25] Biró L P, Bálint Z, Kertész K et al. Role of photonic-crystal-type structures in the thermal regulation of a lycaenid butterfly sister species pair[J]. Physical Review E, 67, 021907(2003).

[26] Parker A R, Welch V L, Driver D et al. Structural colour: opal analogue discovered in a weevil[J]. Nature, 426, 786-787(2003).

[27] McPhedran R C, Nicorovici N A, McKenzie D R et al. Structural colours through photonic crystals[J]. Physica B: Condensed Matter, 338, 182-185(2003).

[28] Nelson E C, Dias N L, Bassett K P et al. Epitaxial growth of three-dimensionally architectured optoelectronic devices[J]. Nature Materials, 10, 676-681(2011).

[29] Ho K M, Chan C T, Soukoulis C M. Existence of a photonic gap in periodic dielectric structures[J]. Physical Review Letters, 65, 3152-3155(1990).

[30] Özbay E, Abeyta A, Tuttle G et al. Measurement of a three-dimensional photonic band gap in a crystal structure made of dielectric rods[J]. Physical Review B: Condensed Matter, 50, 1945-1948(1994).

[31] Zheng X, Taverne M, Ho Y L et al. Cavity design in woodpile based 3D photonic crystals[J]. Applied Sciences, 8, 1087(2018).

[32] Gissibl T, Thiele S, Herkommer A et al. Sub-micrometre accurate free-form optics by three-dimensional printing on single-mode fibres[J]. Nature Communications, 7, 11763(2016).

[33] Saba M, Wilts B D, Hielscher J et al. Absence of circular polarisation in reflections of butterfly wing scales with chiral gyroid structure[J]. Materials Today: Proceedings, 1, 193-208(2014).

[34] Mille C, Tyrode E C, Corkery R W. Inorganic chiral 3-D photonic crystals with bicontinuous gyroid structure replicated from butterfly wing scales[J]. Chemical Communications, 47, 9873-9875(2011).

[35] Saranathan V, Osuji C O, Mochrie S G J et al. Structure, function, and self-assembly of single network gyroid (I4132) photonic crystals in butterfly wing scales[J]. Proceedings of the National Academy of Sciences of the United States of America, 107, 11676-11681(2010).

[36] Gan Z S, Turner M D, Gu M. Biomimetic gyroid nanostructures exceeding their natural origins[J]. Science Advances, 2, e1600084(2016).

[37] Anseth K S, Bowman C N, Peppas N A. Polymerization kinetics and volume relaxation behavior of photopolymerized multifunctional monomers producing highly crosslinked networks[J]. Journal of Polymer Science A Polymer Chemistry, 32, 139-147(1994).

[38] Zhao Y Y, Luo H C, Liang Z X et al. Micro-nano 3D printing based on photopolymerization and its development status and trends[J]. Chinese Journal of Lasers, 49, 1002703(2022).

[39] Wang Q S, Cheng G H, Liu Q et al. Study on the generation of femtosecond regenerative amplified pulses with high repetition rate and high beam quality for hyperfine processing[J]. Acta Physica Sinica, 53, 87-92(2004).

[40] Wang S C, Zhu Y W, Wu Y et al. Development and applications of UV-curing 3D printing and photosensitive resin[J]. Journal of Functional Polymers, 35, 19-35(2022).

[41] Zhang Y, Zhang L D, Zhang C Q et al. Continuous resin refilling and hydrogen bond synergistically assisted 3D structural color printing[J]. Nature Communications, 13, 7095(2022).

[42] Zheng X, Cheng K, Zhou X Q et al. A method for positioning the focal spot location of two photon polymerization[J]. AIP Advances, 7, 095318(2017).

[43] Wang H, Zhang W, Ladika D et al. Two-photon polymerization lithography for optics and photonics: fundamentals, materials, technologies, and applications[J]. Advanced Functional Materials, 33, 2214211(2023).

[44] Kawata S, Sun H B, Tanaka T et al. Finer features for functional microdevices[J]. Nature, 412, 697-698(2001).

[45] Sun H B, Tanaka T, Kawata S. Three-dimensional focal spots related to two-photon excitation[J]. Applied Physics Letters, 80, 3673-3675(2002).

[46] Mettry M, Worthington M A, Au B et al. Refractive index matched polymeric and preceramic resins for height-scalable two-photon lithography[J]. RSC Advances, 11, 22633-22639(2021).

[47] Cao C, Qiu Y W, Guan L L et al. Dip-in photoresist for photoinhibited two-photon lithography to realize high-precision direct laser writing on wafer[J]. ACS Applied Materials & Interfaces, 14, 31332-31342(2022).

[48] Bückmann T, Stenger N, Kadic M et al. Tailored 3D mechanical metamaterials made by dip-in direct-laser-writing optical lithography[J]. Advanced Materials, 24, 2710-2714(2012).

[49] Obata K, Koch J, Hinze U et al. Multi-focus two-photon polymerization technique based on individually controlled phase modulation[J]. Optics Express, 18, 17193-17200(2010).

[50] Vizsnyiczai G, Kelemen L, Ormos P. Holographic multi-focus 3D two-photon polymerization with real-time calculated holograms[J]. Optics Express, 22, 24217-24223(2014).

[51] Jia E S, Xie C, Xiao N et al. Two-photon polymerization of femtosecond high-order Bessel beams with aberration correction[J]. Chinese Optics Letters, 21, 071203(2023).

[52] Singhal A. Tunable 3D photonic crystals for mid-IR gas sensing using metamaterials[D](2023).

[53] Chen L J, Dong X Z, Zhao Y Y et al. Fabrication and optical transmission characteristics of polymers woodpile photonic crystal structures with different crystal planes[J]. Proceedings of SPIE, 9671, 967127(2015).

[54] Serbin J, Ovsianikov A, Chichkov B. Fabrication of woodpile structures by two-photon polymerization and investigation of their optical properties[J]. Optics Express, 12, 5221-5228(2004).

[55] Hell S W, Wichmann J. Breaking the diffraction resolution limit by stimulated emission: stimulated-emission-depletion fluorescence microscopy[J]. Optics Letters, 19, 780-782(1994).

[56] Fischer J, Wegener M. Three-dimensional direct laser writing inspired by stimulated-emission-depletion microscopy[J]. Optical Materials Express, 1, 614-624(2011).

[57] Frölich A, Fischer J, Zebrowski T et al. Titania woodpiles with complete three-dimensional photonic bandgaps in the visible[J]. Advanced Materials, 25, 3588-3592(2013).

[58] Cao Y Y, Xie F, Zhang P D et al. Dual-beam super-resolution direct laser writing nanofabrication technology[J]. Opto-Electronic Engineering, 44, 1133-1145, 1254(2017).

[59] He M F, Zhang Z M, Cao C et al. Single-color peripheral photoinhibition lithography of nanophotonic structures[J]. PhotoniX, 3, 25(2022).

[60] Liu Y J, Wang H, Ho J F et al. Structural color three-dimensional printing by shrinking photonic crystals[J]. Nature Communications, 10, 4340(2019).

[61] Mori T, Wang H, Zhang W et al. Pick and place process for uniform shrinking of 3D printed micro- and nano-architected materials[J]. Nature Communications, 14, 5876(2023).

[62] Duan Q, Zhang W C, Liu J et al. 22 nm resolution achieved by femtosecond laser two-photon polymerization of a hyaluronic acid vinyl ester hydrogel[J]. ACS Applied Materials & Interfaces, 15, 26472-26483(2023).

[63] Li B R, Lalevée J, Mazur L M et al. Copper complex-based photoinitiator for high resolution two-photon polymerization[J]. Additive Manufacturing, 75, 103741(2023).

[64] Waller E H, Renner M, von Freymann G. Active aberration- and point-spread-function control in direct laser writing[J]. Optics Express, 20, 24949-24956(2012).

[65] Bauer J, Crook C, Baldacchini T. A sinterless, low-temperature route to 3D print nanoscale optical-grade glass[J]. Science, 380, 960-966(2023).

[66] Guo R, Li Z Y, Jiang Z W et al. Log-pile photonic crystal fabricated by two-photon photopolymerization[J]. Journal of Optics A: Pure and Applied Optics, 7, 396-399(2005).

[67] Deubel M, von Freymann G, Wegener M et al. Direct laser writing of three-dimensional photonic-crystal templates for telecommunications[J]. Nature Materials, 3, 444-447(2004).

[68] Wong S, Deubel M, Pérez-Willard F et al. Direct laser writing of three- dimensional photonic crystals with a complete photonic bandgap in chalcogenide glasses[J]. Advanced Materials, 18, 265-269(2006).

[69] Urbancová P, Pudiš D, Kuzma A et al. IP-Dip-based woodpile structures for VIS and NIR spectral range: complex PBG analysis[J]. Optical Materials Express, 9, 4307-4317(2019).

[70] Vyatskikh A, Ng R C, Edwards B et al. Additive manufacturing of high-refractive-index, nanoarchitected titanium dioxide for 3D dielectric photonic crystals[J]. Nano Letters, 20, 3513-3520(2020).

[71] Yang S H, Ding C L, Zhu D Z et al. High-speed two-photon lithography based on femtosecond laser[J]. Opto-Electronic Engineering, 50, 220133(2023).

[72] Holzer B, Lunzer M, Rosspeintner A et al. Towards efficient initiators for two-photon induced polymerization: fine tuning of the donor/acceptor properties[J]. Molecular Systems Design & Engineering, 4, 437-448(2019).

[73] Chi T, Somers P, Wilcox D A et al. Tailored thioxanthone-based photoinitiators for two-photon-controllable polymerization and nanolithographic printing[J]. Journal of Polymer Science Part B: Polymer Physics, 57, 1462-1475(2019).

[74] Hu P, Qiu W W, Naumov S et al. Conjugated bifunctional carbazole-based oxime esters: efficient and versatile photoinitiators for 3D printing under one- and two-photon excitation[J]. ChemPhotoChem, 4, 224-232(2020).

[75] Li Z Q, Pucher N, Cicha K et al. A straightforward synthesis and structure‒activity relationship of highly efficient initiators for two-photon polymerization[J]. Macromolecules, 46, 352-361(2013).

[76] Xie C, Sun S X, Jia E S et al. Fabrication of micro-helix structures via two-photon polymerization based on dynamic multi-focus holograms[J]. Chinese Journal of Lasers, 50, 2402402(2023).

[77] Hahn V, Kiefer P, Frenzel T et al. Rapid assembly of small materials building blocks (voxels) into large functional 3D metamaterials[J]. Advanced Functional Materials, 30, 1907795(2020).

[78] Geng Q, Wang D E, Chen P F et al. Ultrafast multi-focus 3-D nano-fabrication based on two-photon polymerization[J]. Nature Communications, 10, 2179(2019).

[79] Du X H, Florian C, Arnold C B. Single-lens dynamic z-scanning for simultaneous in situ position detection and laser processing focus control[J]. Light: Science & Applications, 12, 274(2023).

[80] Jonušauskas L, Gailevičius D, Rekštytė S et al. Mesoscale laser 3D printing[J]. Optics Express, 27, 15205-15221(2019).

[81] Ouyang W Q, Xu X Y, Lu W P et al. Ultrafast 3D nanofabrication via digital holography[J]. Nature Communications, 14, 1716(2023).

[82] Jiao B Z, Chen F Y, Liu Y C et al. Acousto-optic scanning spatial-switching multiphoton lithography[J]. International Journal of Extreme Manufacturing, 5, 035008(2023).

[83] Raut H K, Wang H, Ruan Q F et al. Hierarchical colorful structures by three-dimensional printing of inverse opals[J]. Nano Letters, 21, 8602-8608(2021).

[84] Han F, Gu S Y, Klimas A et al. Three-dimensional nanofabrication via ultrafast laser patterning and kinetically regulated material assembly[J]. Science, 378, 1325-1331(2022).

[85] Marichy C, Muller N, Froufe-Pérez L S et al. High-quality photonic crystals with a nearly complete band gap obtained by direct inversion of woodpile templates with titanium dioxide[J]. Scientific Reports, 6, 21818(2016).

[86] Seniutinas G, Weber A, Padeste C et al. Beyond 100 nm resolution in 3D laser lithography post processing solutions[J]. Microelectronic Engineering, 191, 25-31(2018).

[87] Winczewski J, Herrera M, Cabriel C et al. Additive manufacturing of 3D luminescent ZrO2∶Eu3+ architectures[J]. Advanced Optical Materials, 10, 2102758(2022).

[88] Liu K L, Ding H B, Li S et al. 3D printing colloidal crystal microstructures via sacrificial-scaffold-mediated two-photon lithography[J]. Nature Communications, 13, 4563(2022).

[89] Zeng Y, Liu K L, Ding H B et al. Direct laser writing photonic crystal hydrogels with a supramolecular sacrificial scaffold[J]. Small, 20, e2306524(2024).

[90] Liu S F, Hou Z W, Lin L H et al. 3D laser nanoprinting of functional materials[J]. Advanced Functional Materials, 33, 2211280(2023).

[91] Liu S F, Hou Z W, Lin L H et al. 3D nanoprinting of semiconductor quantum dots by photoexcitation-induced chemical bonding[J]. Science, 377, 1112-1116(2022).

[92] Li F, Liu S F, Liu W Y et al. 3D printing of inorganic nanomaterials by photochemically bonding colloidal nanocrystals[J]. Science, 381, 1468-1474(2023).

[93] Liu H L, Wang H T, Wang H et al. High-order photonic cavity modes enabled 3D structural colors[J]. ACS Nano, 16, 8244-8252(2022).

[94] Zhang Y X, Wu D, Zhang Y C et al. Femtosecond laser direct writing of functional stimulus-responsive structures and applications[J]. International Journal of Extreme Manufacturing, 5, 042012(2023).

[95] Dong B, Liu B R, Chen C et al. Direct laser writing structural color for reversible encryption and decryption in different mediums[J]. Optics Letters, 48, 2508-2511(2023).

[96] de Bellis I, Martella D, Parmeggiani C et al. Temperature tunable 4D polymeric photonic crystals[J]. Advanced Functional Materials, 33, 2213162(2023).

[97] del Pozo M, Delaney C, da Cunha M P et al. Temperature-responsive 4D liquid crystal microactuators fabricated by direct laser writing by two-photon polymerization[J]. Small Structures, 3, 2100158(2022).

[98] Liu B R, Dong B, Xin C et al. 4D direct laser writing of submerged structural colors at the microscale[J]. Small, 19, e2204630(2023).

[99] Liu K L, Ding H B, Chong Z J et al. Direct laser writing photonic crystal hydrogel sensors for in situ sensing in microfluidic device[J]. Chemical Engineering Journal, 482, 148679(2024).

[100] Subramania G, Li Q M, Lee Y J et al. Gallium nitride based logpile photonic crystals[J]. Nano Letters, 11, 4591-4596(2011).

[101] Yu Y, Prudnikau A, Lesnyak V et al. Quantum dots facilitate 3D two-photon laser lithography[J]. Advanced Materials, 35, e2211702(2023).

[102] Gailevičius D, Paipulas D, Hada S et al. Form birefringent polymeric structures realized by 3D laser printing[J]. Optics Letters, 48, 5775-5778(2023).

[103] Notomi M. Negative refraction in photonic crystals[J]. Optical and Quantum Electronics, 34, 133-143(2002).

[104] Sakellari I, Kabouraki E, Karanikolopoulos D et al. Quantum dot based 3D printed woodpile photonic crystals tuned for the visible[J]. Nanoscale Advances, 1, 3413-3423(2019).

[105] Long J, Xiong W, Wei C Y et al. Directional assembly of ZnO nanowires via three-dimensional laser direct writing[J]. Nano Letters, 20, 5159-5166(2020).

[106] Thiel M, Ott J, Radke A et al. Dip-in depletion optical lithography of three-dimensional chiral polarizers[J]. Optics Letters, 38, 4252-4255(2013).

[107] Turner M D, Saba M, Zhang Q M et al. Miniature chiral beamsplitter based on gyroid photonic crystals[J]. Nature Photonics, 7, 801-805(2013).

[108] Goi E, Yue Z J, Cumming B P et al. Observation of type I photonic weyl points in optical frequencies[J]. Laser & Photonics Reviews, 12, 1700271(2018).

[109] Vaidya S, Noh J, Cerjan A et al. Observation of a charge-2 photonic weyl point in the infrared[J]. Physical Review Letters, 125, 253902(2020).

[110] Mueller P, Thiel M, Wegener M. 3D direct laser writing using a 405 nm diode laser[J]. Optics Letters, 39, 6847-6850(2014).

[111] Wang J Y, Yuan Y C, Zhu H et al. Three-dimensional macroporous photonic crystal enhanced photon collection for quantum dot-based luminescent solar concentrator[J]. Nano Energy, 67, 104217(2020).

[112] Malinauskas M, Žukauskas A, Hasegawa S et al. Ultrafast laser processing of materials: from science to industry[J]. Light: Science & Applications, 5, e16133(2016).

[113] Wu X Y, Duan Q, Bin F C et al. Femtosecond laser two-photon polymerization of 3D hydrogel microstructures and their applications[J]. Chinese Journal of Lasers, 50, 2107401(2023).

[114] Zhang W C, Zheng M L, Liu J et al. Modulation of cell behavior by 3D biocompatible hydrogel microscaffolds with precise configuration[J]. Nanomaterials, 11, 2325(2021).

[115] Costa B N L, Adão R M R, Maibohm C et al. Cellular interaction of bone marrow mesenchymal stem cells with polymer and hydrogel 3D microscaffold templates[J]. ACS Applied Materials & Interfaces, 14, 13013-13024(2022).