[1] Wang Y, Yang B W, Gao M Q et al. Deformation behavior and dynamic recrystallization during hot compression in homogenized Al-6Mg-0.8Mn alloys[J]. Materials Science and Engineering: A, 840, 142953(2022).

[2] Guo C, Zhang H T, Li J H. Influence of Zn and/or Ag additions on microstructure and properties of Al-Mg based alloys[J]. Journal of Alloys and Compounds, 904, 163998(2022).

[3] Zhu Z G, Hu Z H, Seet H L et al. Recent progress on the additive manufacturing of aluminum alloys and aluminum matrix composites: Microstructure, properties, and applications[J]. International Journal of Machine Tools and Manufacture, 190, 104047(2023).

[4] Wu G H, Kuang Z Y. Opportunities and challenges for metal matrix composites in the context of equipment upgrading[J]. Strategic Study of CAE, 22, 79-90(2020).

[5] Shi C, Lei J B, Zhou S F et al. Research progress on continuous fiber-reinforced metal matrix composites and their laser cladding[J]. Laser & Optoelectronics Progress, 54, 060003(2017).

[6] Chen K, Ma J W, Qi S et al. Microstructures and mechanical properties of Al-Mg-Sc-Zr alloy formed by selective laser melting[J]. Laser & Optoelectronics Progress, 59, 2116001(2022).

[7] Zou T C, Zhu H, Chen M Y et al. Microstructure and tensile properties of SiC reinforced aluminum matrix composite prepared by selective laser melting[J]. Chinese Journal of Lasers, 48, 1002123(2021).

[8] Gu D D, Zhang H M, Chen H Y et al. Laser additive manufacturing of high-performance metallic aerospace components[J]. Chinese Journal of Lasers, 47, 0500002(2020).

[9] Liang J Y, Zhang W Y, Liu W et al. Optimization and laser selective melting for lattice structure of heat exchanger[J]. Laser & Optoelectronics Progress, 59, 1914006(2022).

[10] Fang L J, Sun B B, Zhang Q et al. Structural design and analysis of selective laser melting forming parts[J]. Laser & Optoelectronics Progress, 60, 0514010(2023).

[11] Yan X X, Bethers B, Chen H X et al. Recent advancements in biomimetic 3D printing materials with enhanced mechanical properties[J]. Frontiers in Materials, 8, 139(2021).

[12] Sun J X, Yu S X, Wade-Zhu J et al. 3D printing of ceramic composite with biomimetic toughening design[J]. Additive Manufacturing, 58, 103027(2022).

[13] Liu X C, Liu Z, Liu Y J et al. Achieving high strength and toughness by engineering 3D artificial nacre-like structures inTi6Al4V-Ti metallic composite[J]. Composites Part B: Engineering, 230, 109552(2022).

[14] Zhang Y, Tan G Q, Zhang M Y et al. Bioinspired tungsten-copper composites with bouligand-type architectures mimicking fish scales[J]. Journal of Materials Science & Technology, 96, 21-30(2022).

[15] Zhang M Y, Zhao N, Yu Q et al. On the damage tolerance of 3-D printed Mg-Ti interpenetrating-phase composites with bioinspired architectures[J]. Nature Communications, 13, 3247(2022).

[16] Chen C J, Li Z H, Mi R Y et al. Rapid processing of whole bamboo with exposed, aligned nanofibrils toward a high-performance structural material[J]. ACS Nano, 14, 5194-5202(2020).

[17] Li S H, Zeng Q Y, Xiao Y L et al. Biomimicry of bamboo bast fiber with engineering composite materials[J]. Materials Science and Engineering: C, 3, 125-130(1995).

[18] Lin C F, Wu W W, Han Y Q et al. Orderly nucleation and competitive growth behaviors of Ti-Al intermetallic compounds in Ti/TiAl3 diffusion couple under high temperature[J]. Journal of Alloys and Compounds, 939, 168815(2023).

[19] Zhang H M, Zhang N N, Jia Q Q et al. Calculation and experimentation on the formation sequence of compounds at Al/Ti interface in pure Al antioxidant coatings[J]. Materials Today Communications, 25, 101192(2020).

[20] Yang W Y, Weatherly G C. A study of combustion synthesis of Ti-Al intermetallic compounds[J]. Journal of Materials Science, 31, 3707-3713(1996).

[21] Sujata M, Bhargava S, Sangal S. On the formation of TiAl3 during reaction between solid Ti and liquid Al[J]. Journal of Materials Science Letters, 16, 1175-1178(1997).

[22] Li L, Xiao L R, Zhang D K et al. Ductilization of a diffusion-bonded heterostructured AZ31/GW103K/AZ31 alloy by interfacial reinforcement[J]. Materials Science and Engineering: A, 852, 143691(2022).

[23] Shao C W, Zhao S, Wang X G et al. Architecture of high-strength aluminum-matrix composites processed by a novel microcasting technique[J]. NPG Asia Materials, 11, 69(2019).

[24] Pawlowski A E, Cordero Z C, French M R et al. Damage-tolerant metallic composites via melt infiltration of additively manufactured preforms[J]. Materials & Design, 127, 346-351(2017).

[25] Tsopanos S, Mines R A W, McKown S et al. The influence of processing parameters on the mechanical properties of selectively laser melted stainless steel microlattice structures[J]. Journal of Manufacturing Science and Engineering, 132, 041011(2010).

[26] Smith M, Guan Z, Cantwell W J. Finite element modelling of the compressive response of lattice structures manufactured using the selective laser melting technique[J]. International Journal of Mechanical Sciences, 67, 28-41(2013).

[27] Huang H F, Jiang F, Zhou J et al. Effects of Al3(Sc, Zr) and shear band formation on the tensile properties and fracture behavior of Al-Mg-Sc-Zr alloy[J]. Journal of Materials Engineering and Performance, 24, 4244-4252(2015).

[28] Li W C, Cai H W, Kang Y et al. High permeability and low loss bioinspired soft magnetic composites with nacre-like structure for high frequency applications[J]. Acta Materialia, 167, 267-274(2019).

[29] Caminero M A, García-Moreno I, Rodríguez G P et al. Internal damage evaluation of composite structures using phased array ultrasonic technique: impact damage assessment in CFRP and 3D printed reinforced composites[J]. Composites Part B: Engineering, 165, 131-142(2019).

[30] Azarov A V, Antonov F K, Golubev M V et al. Composite 3D printing for the small size unmanned aerial vehicle structure[J]. Composites Part B: Engineering, 169, 157-163(2019).

[31] Xu Z H, Li X D. Deformation strengthening of biopolymer in nacre[J]. Advanced Functional Materials, 21, 3883-3888(2011).

[32] Liu J L, Huang Z W, Pan Z L et al. Atomistic origin of deformation twinning in biomineral aragonite[J]. Physical Review Letters, 118, 105501(2017).

[33] Song N N, Zhang Y Y, Gao Z et al. Bioinspired, multiscale reinforced composites with exceptionally high strength and toughness[J]. Nano Letters, 18, 5812-5820(2018).