[2] [2] SVETLIZKY D, ZHENG B L, VYATSKIKH A, et al. Laser-based directed energy deposition (DED-LB) of advanced materials[J]. Materials Science and Engineering: A, 2022, 840: 142967.

[3] [3] HASCOE..T J Y, TOUZ S, RAUCH M. Automated identification of defect geometry for metallic part repair by an additive manufacturing process[J]. Welding in the World, 2018, 62(2): 229-241.

[4] [4] SOMMERFELD M. Modelling of particle-wall collisions in confined gas-particle flows[J]. International Journal of Multiphase Flow, 1992, 18(6): 905-926.

[5] [5] HUBER N, SOMMERFELD M. Modelling and numerical calculation of dilute-phase pneumatic conveying in pipe systems[J]. Powder Technology, 1998, 99(1): 90-101.

[6] [6] TSUJI Y, SHEN N Y, MORIKAWA Y. Lagrangian simulation of dilute gas-solid flows in a horizontal pipe[J]. Advanced Powder Technology, 1991, 2(1): 63-81.

[7] [7] HEIGEL J C, MICHALERIS P, PALMER T A. Measurement of forced surface convection in directed energy deposition additive manufacturing[J]. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 2016, 230(7): 1295-1308.

[8] [8] PAN H, SPARKS T, THAKAR Y D, et al. The investigation of gravity-driven metal powder flow in coaxial nozzle for laser-aided direct metal deposition process[J]. Journal of Manufacturing Science and Engineering, 2006, 128(2): 541-553.

[9] [9] YANG N. Concentration model based on movement model of powder flow in coaxial laser cladding[J]. Optics & Laser Technology, 2009, 41(1): 94-98.

[10] [10] JALLO L J, SCHOENITZ M, DREIZIN E L, et al. The effect of surface modification of aluminum powder on its flowability, combustion and reactivity[J]. Powder Technology, 2010, 204(1): 63-70.

[11] [11] STRONDL A, LYCKFELDT O, BRODIN H, et al. Characterization and control of powder properties for additive manufacturing[J]. JOM, 2015, 67(3): 549-554.

[12] [12] PAN H, LIOU F. Numerical simulation of metallic powder flow in a coaxial nozzle for the laser aided deposition process[J]. Journal of Materials Processing Technology, 2005, 168(2): 230-244.

[13] [13] BALU P, LEGGETT P, KOVACEVIC R. Parametric study on a coaxial multi-material powder flow in laser-based powder deposition process[J]. Journal of Materials Processing Technology, 2012, 212(7): 1598-1610.

[18] [18] LIN J. Numerical simulation of the focused powder streams in coaxial laser cladding[J]. Journal of Materials Processing Technology, 2000, 105(1/2): 17-23.

[19] [19] KOVALEVA I, KOVALEV O, ZAITSEV A, et al. Numerical simulation and comparison of powder jet profiles for different types of coaxial nozzles in direct material deposition[J]. Physics Procedia, 2013, 41: 870-872.

[20] [20] WEN S Y, SHIN Y C, MURTHY J Y, et al. Modeling of coaxial powder flow for the laser direct deposition process[J]. International Journal of Heat and Mass Transfer, 2009, 52(25/26): 5867-5877.

[22] [22] YANG S F, EVANS J R G. Flow rate of metal powders at reduced and elevated air pressure[J]. Powder Technology, 2005, 154(2/3): 95-98.

[24] [24] TAN H, ZHANG F Y, WEN R J, et al. Experiment study of powder flow feed behavior of laser solid forming[J]. Optics and Lasers in Engineering, 2012, 50(3): 391-398.

[25] [25] LEI Z L, WU S B, LI P, et al. Numerical study of thermal fluid dynamics in laser welding of Al alloy with powder feeding[J]. Applied Thermal Engineering, 2019, 151: 394-405.

[26] [26] ZHANG Y. Study on powder delivery in laser welding of high strength galvanized steel with powder filling[J]. Journal of Mechanical Engineering, 2014, 50(4): 60.

[36] [36] OLAKANMI E O. Selective laser sintering/melting (SLS/SLM) of pure Al, Al-Mg, and Al-Si Powders: Effect of processing conditions and powder properties[J]. Journal of Materials Processing Technology, 2013, 213(8): 1387-1405.

[37] [37] DING Y, MUIZ-LERMA J A, TRASK M, et al. Microstructure and mechanical property considerations in additive manufacturing of aluminum alloys[J]. MRS Bulletin, 2016, 41(10): 745-751.

[38] [38] HEIDEN M J, DEIBLER L A, RODELAS J M, et al. Evolution of 316L stainless steel feedstock due to laser powder bed fusion process[J]. Additive Manufacturing, 2019, 25: 84-103.

[41] [41] TOUZ S, RAUCH M, HASCOE..T J Y. Flowability characterization and enhancement of aluminium powders for additive manufacturing[J]. Additive Manufacturing, 2020, 36: 101462.

[42] [42] STICHEL T, LAUMER T, LINNENWEBER T, et al. Mass flow characterization of selective deposition of polymer powders with vibrating nozzles for laser beam melting of multi-material components[J]. Physics Procedia, 2016, 83: 947-953.

[43] [43] POLIZZI M A, FRANCHVILLE J, HILDEN J L. Assessment and predictive modeling of pharmaceutical powder flow behavior in small-scale hoppers[J]. Powder Technology, 2016, 294: 30-42.