[4] [4] WANG Z W, LI Y, ZHANG Z H, et al. Friction and wear behavior of duplex-treated AISI 316L steels by rapid plasma nitriding and (CrWAlTiSi) N ceramic coating[J]. Results in Physics, 2021, 24: 104132.

[5] [5] ZENDEJAS MEDINA L, TAVARES DA COSTA M V, PASCHALIDOU E M, et al. Enhancing corrosion resistance, hardness, and crack resistance in magnetron sputtered high entropy CoCrFeMnNi coatings by adding carbon[J]. Materials & Design, 2021, 205: 109711.

[6] [6] NI C, SHI Y, LIU J, et al. Characterization of Al0.5FeCu0.7NiCoCr high-entropy alloy coating on aluminum alloy by laser cladding[J]. Optics & Laser Technology, 2018, 105: 257-263.

[9] [9] YASAVOL N, ABDOLLAH-ZADEH A, GANJALI M, et al. Microstructure and mechanical behavior of pulsed laser surface melted AISI D2 cold work tool steel[J]. Applied Surface Science, 2013, 265: 653-662.

[10] [10] COLAO R, VILAR R. On the influence of retained austenite in the abrasive wear behaviour of a laser surface melted tool steel[J]. Wear, 2005, 258(1/2/3/4): 225-231.

[11] [11] ZHANG H, ZHANG C H, WANG Q, et al. Effect of Ni content on stainless steel fabricated by laser melting deposition[J]. Optics & Laser Technology, 2018, 101: 363-371.

[12] [12] SOURMAIL T, CABALLERO F G, GARCIA-MATEO C, et al. Evaluation of potential of high Si high C steel nanostructured bainite for wear and fatigue applications[J]. Materials Science and Technology, 2013, 29(10): 1166-1173.

[13] [13] MOGHADDAM P V, HARDELL J, VUORINEN E, et al. The role of retained austenite in dry rolling/sliding wear of nanostructured carbide-free bainitic steels[J]. Wear, 2019, 428/429: 193-204.

[14] [14] MOGHADDAM P V, HARDELL J, VUORINEN E, et al. Effect of retained austenite on adhesion-dominated wear of nanostructured carbide-free bainitic steel[J]. Tribology International, 2020, 150: 106348.

[15] [15] ZHAO T, ZHANG S, ZHOU F Q, et al. Microstructure evolution and properties of in situ TiC reinforced titanium matrix composites coating by plasma transferred arc welding (PTAW)[J]. Surface and Coatings Technology, 2021, 424: 127637.

[16] [16] WU C L, ZHANG S, ZHANG C H, et al. Phase evolution and properties in laser surface alloying of FeCoCrAlCuNix high-entropy alloy on copper substrate[J]. Surface and Coatings Technology, 2017, 315: 368-376.

[18] [18] CHEN J W, ZHANG C H, ZHOU F Q, et al. Microstructural, electrochemical and wear-corrosion characterization of TC4-5Cu alloy fabricated by selective laser melting[J]. Journal of Alloys and Compounds, 2021, 874: 159953.

[21] [21] XU T Z, ZHANG S, WANG Z Y, et al. Wear behavior of graphite self-lubricating Babbitt alloy composite coating on 20 steel prepared by laser cladding[J]. Engineering Failure Analysis, 2022, 141: 106698.

[22] [22] CHAI L J, WANG C, XIANG K, et al. Phase constitution, microstructure and properties of pulsed laser-clad ternary CrNiTi medium-entropy alloy coating on pure titanium[J]. Surface and Coatings Technology, 2020, 402: 126503.

[23] [23] PARK S H C, SATO Y S, KOKAWA H. Microstructural evolution and its effect on Hall-Petch relationship in friction stir welding of thixomolded Mg alloy AZ91D[J]. Journal of Materials Science, 2003, 38(21): 4379-4383.