[1] Wang H M, Zhang S Q, Tang H B et al. Research progress of laser rapid prototyping technology for large titanium alloy structures[J]. Aviation Precision Manufacturing Technology, 44, 28-30(2008).

[2] Wang H M. Materials' fundamental issues of laser additive manufacturing for high-performance large metallic components[J]. Acta Aeronautica et Astronautica Sinica, 35, 2690-2698(2014).

[3] Shamsaei N, Yadollahi A, Bian L K et al. An overview of direct laser deposition for additive manufacturing; part II: mechanical behavior, process parameter optimization and control[J]. Additive Manufacturing, 8, 12-35(2015). http://www.sciencedirect.com/science/article/pii/s2214860415000329

[4] Colegrove P A, Donoghue J, Martina F et al. Application of bulk deformation methods for microstructural and material property improvement and residual stress and distortion control in additively manufactured components[J]. Scripta Materialia, 135, 111-118(2017). http://www.sciencedirect.com/science/article/pii/S1359646216305267

[5] Liu Y, Li Y M, Huang X P et al. Microstructure of laser net shape manufactured Ti-6A1-4V[J]. Chinese Journal of Lasers, 34, 163-166(2007).

[6] Manvatkar V, De A. DebRoy T, et al. Spatial variation of melt pool geometry, peak temperature and solidification parameters during laser assisted additive manufacturing process[J]. Materials Science and Technology, 31, 924-930(2015).

[7] Manvatkar V, De A, DebRoy T et al. Heat transfer and material flow during laser assisted multi-layer additive manufacturing[J]. Journal of Applied Physics, 116, 124905(2014). http://ieeexplore.ieee.org/xpl/articleDetails.jsp?arnumber=6913483

[8] Yang J, Huang W D, Chen J et al. Residual stress on laser rapid forming metal part[J]. Applied Laser, 24, 5-8(2004).

[9] Milewski J O, Thoma D J, Fonseca J C et al. Development of a near net shape processing method for rhenium using directed light fabrication[J]. Materials and Manufacturing Processes, 13, 719-730(1998). http://www.tandfonline.com/doi/abs/10.1080/10426919808935294

[10] Paydas H, Mertens A, Carrus R et al. Laser cladding as repair technology for Ti-6Al-4V alloy: influence of building strategy on microstructure and hardness[J]. Materials & Design, 85, 497-510(2015). http://www.sciencedirect.com/science/article/pii/S0264127515301064

[11] Liu F C, Lin X, Huang C P et al. The effect of laser scanning path on microstructures and mechanical properties of laser solid formed nickel-base superalloy Inconel 718[J]. Journal of Alloys and Compounds, 509, 4505-4509(2011). http://www.sciencedirect.com/science/article/pii/S0925838810029397

[12] Long R S, Liu W J, Xing F et al. Effects of scanning methods on temperature during laser directly metal shaping[J]. Journal of Optoelectronics·Laser, 19, 528-531(2008).

[13] Yan W Z, Zhao W J, Yue Z F et al. Study on the role of deposition path in additive manufacturing process[J]. Aeronautical Science & Technology, 29, 58-66(2018).

[14] Yang G, Zhou J P, Qin L Y et al. Influence of separate area scanning on coupled thermo-mechanical field of laser repairing of titanium alloy[J]. Transactions of the China Welding Institution, 38, 63-68, 131-132(2017).

[15] Yang G, Zhou J P, Qin L Y et al. Influence of separate area scanning on the temperature field of laser deposition manufacturing of titanium alloy[J]. Applied Laser, 35, 428-436(2015).

[16] Bian H Y, Zuo S G, Qu S et al. Generation algorithm of subarea annular scan paths for laser deposition forming[J]. Laser & Optoelectronics Progress, 56, 021601(2019).

[17] Zhou X X, Xin B, Gong Y D et al. Effect of scanning direction on microstructure and mechanical properties of part formed via variable thickness layer cladding deposition[J]. Chinese Journal of Lasers, 46, 0802003(2019).

[18] Pei M Y, Wurikaixi A Y T, Wang S Q et al. Influence of the laser-cladding scanning path on thin-plate distortions[J]. Laser & Optoelectronics Progress, 57, 171403(2020).

[19] Kruth J P, Deckers J, Yasa E et al. Assessing and comparing influencing factors of residual stresses in selective laser melting using a novel analysis method[J]. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 226, 980-991(2012). http://www.researchgate.net/publication/273425459_Assessing_and_comparing_influencing_factors_of_residual_stresses_in_selective_laser_melting_using_a_novel_analysis_method

[20] Mercelis P, Kruth J P. Residual stresses in selective laser sintering and selective laser melting[J]. Rapid Prototyping Journal, 12, 254-265(2006). http://www.researchgate.net/publication/287740177_residual_stresses_in_selective_laser_sintering_and_selective_laser_melting

[21] Shi Y J, Shen H, Yao Z Q et al. Temperature gradient mechanism in laser forming of thin plates[J]. Optics & Laser Technology, 39, 858-863(2007).