[1] [1] LIU J J, YAN P, LI G Zh, et al. Laser processing technology ［J］. Physics Bulletin, 2009(8): 54-56(in Chinese).

[2] [2] XU K K. Research on high-speed galvanometer scanning laser 3-D printing control system［D］. Wuhan: Huazhong University of Science and Technology, 2017:4-55(in Chinese).

[3] [3] WANG B, LIU X D, LI J H, et al. Research on dot laser drilling location algorithm based on neighborhood features［J］. Laser Technology, 2019, 43(5): 1-6(in Chinese).

[4] [4] LUO X, LI J, LUCAS M. Galvanometer scanning technology for laser additive manufacturing［J］.Proceedings of the SPIE, 2017,10095:1009512.

[5] [5] GAO X L. Binarization of image processing in laser engraving［J］. Laser Journal, 2004, 25(4):76-78(in Chinese).

[6] [6] WANG J P, LI Zh J, FAN X H. Analysis of laser marking system and process parameters ［J］. Optics and Optoelectronic Technology, 2005, 3(3): 32-35(in Chinese).

[7] [7] XU L P, HU B. A conversion method from JPG image to PLT file［J］. Laser Journal, 2005,26(6):50-51(in Chinese).

[8] [8] LIU T L, HU B, YING H Sh, et al. Experimental research on laser marking error［J］. Laser Journal,2007, 28(1): 33-34(in Chinese).

[9] [9] LIAO P, YANG D Y, LIU R X. An optimization algorithm of truetype font contour line approximation in laser marking［J］. Laser Technology, 2016, 40(4):483-486(in Chinese).

[10] [10] HAN X L, LIU Sh J. Extension of cubic uniform B-spline curve［J］. Journal of Cofmputer Aided Design and Graphics, 2003, 15(5): 576-578(in Chinese).

[11] [11] PIEGL L, TILLER W. The NURBS book ［M］. 2th ed.New York,USA: Springer, 1997: 410-419.

[12] [12] LIU M Z, GUO Q J, WANG S Q. Adaptive B-spline curve fitting based on regular asymptotic iterative approximation［J］. Journal of Graphics, 2018,39(2):287-294(in Chinese).

[13] [13] SELINGER P. Potrace: A polygon-based tracing algorithm ［DB/OL］.(2003-9-20)［2020-10-16］. http://potrace.sourceforge.net/potrace.pdf.

[14] [14] YAO P P, FAN Zh, ZHANG S L. Improved Potrace jacquard image vectorization algorithm ［J］. Sensors and Microsystems, 2014, 33(4): 125-127(in Chinese).

[15] [15] YU X J, PENG L Zh. A new algorithm for curve contour extraction in binary image［J］. Journal of Image and Graphics,2002,A7(3):272-275(in Chinese).

[16] [16] ZHANG Ch C, SUN X M, ZHU T Y. Research on AutoCAD’s DXF file format and its conversion interface ［J］. Microcomputer Applications, 2001,17(8): 54-55 (in Chinese).

[17] [17] HETAL N F, AKASH B P, DIVYANG D P, et al. A review on approaches for handling bezier curves in CAD for manufacturing［J］. Procedia Engineering, 2014, 97:1155-1166.

[18] [18] YANG J. Research and implementation of key algorithms for forward-looking direct interpolation of NURBS curves in high-speed machining numerical control systems ［D］. Hangzhou: Zhejiang University, 2019 :4-32(in Chinese).

[19] [19] XU Y M, WEN Sh Ch. Study on Bezier curve recursive algorithm［J］.Journal of Hengyang Normal University, 2007,28 (6): 113-115(in Chinese).

[20] [20] KUANG Y, WU Y F, WU B, et al. Extraction and optimization of marking path in laser marking system［J］. Laser Technology, 2012, 36(1): 131-133(in Chinese).