[1] Huang Y Y, Qian J, Shao C Y et al. Femtosecond laser induced defects in pure silica glass with different hydroxyl concentrations[J]. Chinese Journal of Lasers, 44, 0102011(2017).

[2] Hu X B, Hao Q, Guo Z R et al. Dicing of sapphire wafer with all-fiber picosecond laser[J]. Chinese Journal of Lasers, 44, 0102016(2017).

[3] Luo K, Chen X Q, Peng Y et al. Study of the effects of femtosecond laser peak power to silicon micro-structure[J]. Optical Instruments, 38, 402-406(2016).

[4] Wang L, Fan B, Wang Z S et al. Dielectric optical property transformation under irradiation of ultra-short pulse laser[J]. Optical Instruments, 30, 73-76(2008).

[5] Klimt B H, Herrmann T. Very high repetition rate ps-laser for cost effective micro-machining[C]. Photonic Applications Systems Technologies Conference, PThB2(2005).

[6] Muhammad N, Whitehead D, Boor A et al. Picosecond laser micromachining of nitinol and platinum-iridium alloy for coronary stent applications[J]. Applied Physics A, 106, 607-617(2012). http://link.springer.com/article/10.1007/s00339-011-6609-4

[7] Liu Y, Yu J, Zhang X et al. Investigation and application of coaxial output three-wavelength picosecond laser micro-machining system[J]. Laser & Optoelectronics Progress, 50, 051402(2013).

[8] Zhao Y H, Zheng Y, Zhang Y P et al. The study of pulse broadening of chirped Gaussian pulses in fiber[J]. Optoelectronic Technology, 26, 177-180(2006).

[9] Lin D F. The watt level pico-second fiber laser in MOPA construction[D]. Changsha: National University of Defense Technology, 34-36(2008).

[10] Wang Z W, Wang Z K, Zou F et al. High-peak-power rod-type photonic crystal fiber amplifier for picosecond pulses[J]. Chinese Journal of Lasers, 43, 1001001(2016).

[11] Kong L J, Zhao L M, Lefrancois S et al. Generation of megawatt peak power picosecond pulses from a divided-pulse fiber amplifier[J]. Optics Letters, 37, 253-255(2012). http://pubmedcentralcanada.ca/pmcc/articles/PMC3412309/

[12] Hao Q, Wang Y F, Liu T T et al. Divided-pulse nonlinear amplification at 1.5 μm[J]. IEEE Photonics Journal, 8, 16290049(2016). http://ieeexplore.ieee.org/document/7553574/

[13] Bai Y S, Chen X T, Chen J W et al. Numerical study on picosecond pulse fiber amplifier based on divided-pulse amplification technique[J]. Chinese Journal of Lasers, 44, 0201021(2017).

[14] Chen S P, Chen H W, Hou J et al. 30 W picosecond pulsed fiber laser and high power supercontinuum generation[J]. Chinese Journal of Lasers, 37, 1943-1949(2010).

[15] Lu Y F, Wang Y, Liu B et al. 1.5 MW peak power, fiber-solid hybrid amplification MOPA lasers[J]. Chinese Journal of Lasers, 42, 0202009(2015).

[16] Fu J, Pang Q S, Chang L et al. Research on cavity-dumping mode-locked laser of picosecond at 10 kHz[J]. Acta Optica Sinica, 31, 0314002(2011).

[17] Qu Y X, Pan X, Huang W F et al. 1030 nm picosecond level optical parametric chirped pulse amplification pump[J]. Chinese Journal of Lasers, 39, 0802003(2012).

[18] Lian F Q, Fan Z W, Bai Z A et al. A Nd∶YAG regenerative amplifier seeded by 1064 nm picosecond fiber[J]. Acta Physica Sinica, 63, 134207(2014).

[19] Zhang H J, Wang J Y, Meng X L et al. Preparation and properties of vanadate series crystals[J]. Journal of Synthetic Crystals, 32, 446-450(2003).

[20] Han F E, Tao Z D. Development and application prospect of polarization maintaining fiber[J]. Optical Fiber & Electric Cable and Their Applications, 1, 28-32(1990).

[21] Luo J, Yang S, Hao Q et al. Precise locking the repetition rate of a SESAM mode-locking all polarization maintaining fiber laser[J]. Acta Optica Sinica, 37, 0206003(2017).

[22] Li P X, Wang X X, Su N et al. Picosecond pulsed all-fiber Yb-doped laser with high repetition rate and wide spectrum[J]. Chinese Journal of Lasers, 44, 0201017(2017).

[23] Meng X L, Zhang H J, Zhu L et al. Spectra and laser properties of Nd∶YVO4 single crystal[J]. Journal of Synthetic Crystals, 28, 135-139(1999).