[4] WESOŁOWSKI M, BLACHA K, PIETRUSZEWSKI P et al. Analysis of the actual contact surface of selected aircraft tires with the airport pavement as a function of pressure and vertical load[J]. Coatings, 10, 591(2020).

[5] ZHU L, CAI W, FRIEZE P A et al. Design method for steel deck plates under quasi-static patch loads with allowable plastic deformations[J]. Marine Structures, 71, 102702(2020).

[6] [6] ZHU L, GAO J Y, LI Y G. Numerical analysis on the response of deck plates laterally impacted by a rectangular indenter[C]Proceedings of the 37th ASME International Conference on Ocean, Offshe Arctic Engineering. Madrid, Spain: ASME, 2018.

[7] OMIDALI M, KHEDMATI M R. Reliability-based design of stiffened plates in ship structures subject to wheel patch loading[J]. Thin-Walled Structures, 127, 416-424(2018).

[8] POLASIK J, WALUŚ K J, WARGUŁA Ł. Experimental studies of the size contact area of a summer tire as a function of pressure and the load[J]. Procedia Engineering, 177, 347-351(2017).

[12] TIHONOV A N. Solution of incorrectly formulated problems and the regularization method[J]. Soviet Math Dokl, 5, 1035-1038(1963).

[13] GOLUB G H, HEATH M, WAHBA G. Generalized cross-validation as a method for choosing a good ridge parameter[J]. Technometrics, 21, 215-223(1979).

[14] SEBASTIAN W M, WEBSTER T, KENNEDY C et al. Profiled metal plate-Cork mat loading systems on cellular FRP bridge decks to reproduce tyre-to-deck contact pressure distributions[J]. Construction and Building Materials, 49, 1064-1082(2013).

[15] REYNAUD P, NASR S B, ALLOU F et al. 3D modelling of tyre-pavement contact pressure[J]. European Journal of Environmental and Civil Engineering, 21, 712-729(2017).