[1] [1] Yang Yong,Bai Zikui,Xie Changsheng. Development on stability study of metal oxide gas sensor [J]. Transducer and Microsystem Technologies,2007,26(2):1-4

[2] [2] Sang Woo Lee,Ping Ping Tsai,Haydn Chen. Comparison study of SnO2 thin-and thick-film gas sensors [J]. Sens. Acturator B,2000,67(1-2):122-127

[3] [3] Y. C. Lee,Hui Huang,O. K. Tan et al.. Semiconductor gas sensor based on Pd-doped SnO2 nanorod thin films [J]. Sens. Acturator B,2008,132(1):239-242

[4] [4] G. Williams,G. S. V. Coles. The gas-sensing potential of nanocrystalline tin dioxide produced by a laser ablation technique [J]. MRS Bulletin,1999,24(6):25-29

[5] [5] Fu Jun,Dong Mingyou. Study on the effects of film thickness on the gas-sensing properties of SnO2 thick film sensor [J]. J. Inorganic Materials,2001,16(6):1255-1259

[6] [6] X. Y. Zeng,X. Y. Li,J. W. Liu et al.. Direct fabrication of electric components on insulated boards by laser micro-cladding electronic pastes [J]. IEEE Trans. Advanced Packaging,2006,29(2):291-294

[7] [7] Wang Shaofei,Cao Yu,Wang Xiaobao et al.. Microheater array fabrication by laser micro-cladding method [J]. Chinese J. Lasers,2007,34(11):1567-1570

[8] [8] Dai Qinglong,Wang Xiaobao,Cai Zhixiang et al.. Study of thin film inductor with air core fabricated by laser micro-cladding method [J]. Chinese J. Lasers,2007,34(s1):231-234

[9] [9] Li Huiling,Zeng Xiaoyan. Effect of overlapped spaces on structure property of thick-film resistors flexibly and directly fabricated by laser micro-cladding [J]. Chinese J. Lasers,2005,32(11):1554-1560

[10] [10] Cai Zhixiang,Li Xiangyou,Hu Qianwu et al.. Study of laser sintering of thick-film PTC thermistor paste [J]. Chinese J. Lasers,2009,36(4):1011-1015

[11] [11] Zhou Bing,Zhao Yimin,Wu Guofeng et al.. Application of selective laser sintering in fabricating nasal prostheses [J]. Chinese J. Lasers,2008,35(10):1644-1648

[12] [12] Qi Heng,Wang Xiansong,Chen Tao et al.. Fabrication and application of PMMA continuous-flow PCR microfluidic chip with CO2 laser direct-writing ablation micromachining technique [J]. Chinese J. Lasers,2009,36(5):1239-1245

[13] [13] Wang Lin,Zhang Tanyi,Zhu Bailin et al.. Laser sintering ZnO nanoparticals gas sensors and their gas sensitivities [J]. Chinese J. Sensors and Actuator,2003,16(4):491-495

[14] [14] Sun Ke,Zhao Yan,Shen Wenfeng et al.. Gas sensing properties of SnO2 films sintered by laser [J]. Chinese J. Materials Research,2003,17(2):180-186

[15] [15] Li Xiangyou,Cai Zhixiang,Cao Yu et al.. Equipment manufacture based on laser micro-cladding & micropen [J]. Applied Laser,2007,27(2):81-84