[1] [1] Jeong D H, Choi M J, Goto M, et al. Effect of service exposure on fatigue crack propagation of Inconel 718 turbine disc material at elevated temperatures［J］. Materials Characterization, 2014, 95: 232-244.

[2] [2] Liu Y G, Li H M, Li M Q. Characterization of surface laser in TC17 alloy treated by air blast shot peening［J］. Materials & Design, 2015, 65: 120-126.

[3] [3] De Mello J D B, Goncalves J L, Costa H L. Influence of surface texturing and hard chromium coating on the wear of steels used in cold rolling mill rolls［J］. Wear, 2013, 302(1-2): 1295-1309.

[4] [4] Cuellar S D, Hill M R, Dewald A T, et al. Residual stress and fatigue life in laser shock peened open hole samples［J］. International Journal of Fatigue, 2012, 44: 8-13.

[5] [5] Zhang X Q, Chen L S, Li S.Z, et al. Investigation of the fatigue life of pre- and post-drilling hole in dog-bone specimen subjected to laser shot peening［J］. Materials & Design, 2015, 88: 106-114.

[6] [6] Achintha M, Nowell D, Fufari D, et al. Fatigue behaviour of geometric features subjected to laser shock peening: Experiments and modelling［J］. International Journal of Fatigue, 2014, 62: 171-179.

[7] [7] Wang Zhongren, Yuan Shijian, Hu Lianxi, et al. Fundamentals of elasticity and plasticity［M］. Harbin: Harbin Institute of Technology Press, 2007: 7-16.

[8] [8] British Standards Institution. BS EN 15305:2008 Non-destructive testing-test method for residual stress analysis by X-ray diffraction［S］. London: BSI Group, 2008.

[9] [9] Rule W K, Jones S E. A revised form for the Johnson-Cook strengthmodel［J］. International Journal of Impact Engineering, 1998, 21(8): 609-624.

[10] [10] Zhou Z, GillA S, Qian D, et al. A finite element study of thermal relaxation of residual stress in laser shock peened IN718 superalloy［J］. International Journal of Impact Engineering, 2011, 38(7): 590-596.

[11] [11] Zhou Z, Bhamare S, Ramakrishnan G, et al. Thermal relaxation of residual stress in laser shock peened Ti-6Al-4V alloy［J］. Surface and Coatings Technology, 2012, 206(22): 4619-4627.

[12] [12] Zhang X Q, Li H, Duan S W, et al. Modeling of residual stress field induced in Ti-6Al-4V alloy plate by two sided laser shock processing［J］. Surface and Coatings Technology, 2015, 280: 163-173.

[13] [13] Wang Changyu, Luo Kaiyu, Lu Jinzhong. Effect of advancing direction on residual stress fields of AM50 Mg alloy specimens treated by double-sided laser shock peening［J］. Chinese J Lasers, 2016, 43(3): 0303002.

[14] [14] Pan Yinghui, Liu Yanbin, Dai Fengze, et al. Experimental investigation and finite element analysis on residual stress field in LSP Inconel 718［J］. Journal of Fuzhou University, 2012, 40(3): 370-375.

[15] [15] Fabbro R, Fournier J, Ballard P, et al. Physical study of laser-produced plasma in confined geometry［J］. Journal of Applied Physics, 1990, 68(2): 775-784.

[16] [16] Zhang Xingquan, Li Huan, Huang Zhilai, et al. Numerical simulation of residual stress induced in 7075 aluminum alloy by repeated high-power laser pulses［J］. Chinese J Lasers, 2015, 42(12): 1203002.

[17] [17] Brockman R A, Braisted W R, Olson S E, et al. Prediction and characterization of residual stresses from laser shock peening［J］. International Journal of Fatigue, 2012, 36(1): 96-108.

[18] [18] Zhou Yu. Analysis methods of materials［M］. Beijing: China Machine Press, 2011: 71-80.

[19] [19] Liu Hongwen. Mechanics of materials［M］. Beijing: Higher Education Press, 2004: 216-226.