[1] MIZUNO Y, HE Z Y, HOTATE K. Dependence of the Brillouin frequency shift on temperature in a tellurite glass fiber and a bismuth-oxide highly-nonlinear fiber[J]. Applied Physics Express, 2, 112402(2009).

[2] BERNINI R, PERSICHETTI G, CATALANO E et al. Refractive index sensing by Brillouin scattering in side-polished optical fibers[J]. Optics Letters, 43, 2280-2283(2018).

[3] LI Shiyi, LI Hao, JI Wenbin et al. Optical fiber sensing structure for slope monitoring based on Brillouin optical time domain reflectometer[J]. Acta Photonica Sinica, 50, 0906005(2021).

[4] ZAGHLOUL M A S, WANG M H, MILIONE G et al. Discrimination of temperature and strain in Brillouin optical time domain analysis using a multicore optical fiber[J]. Sensors, 18, 1176(2018).

[5] SUN X G, BEDARD K, LI J et al. A dual-Brillouin-peak optical fiber for simultaneous distributed strain and temperature measurement[C], 7-12(2018).

[6] SABATIER C, GIRARD S, MESCIA L et al. Combined experimental and simulation study of the fiber composition effects on its Brillouin scattering signature[J]. Journal of Lightwave Technology, 37, 4619-4624(2019).

[7] XU Y P, REN M Q, LU Y et al. Multi-parameter sensor based on stimulated Brillouin scattering in inverse-parabolic graded-index fiber[J]. Optics Letters, 41, 1138-1141(2016).

[8] XING C, KE C J, GUO Z et al. Distributed multi-parameter sensing utilizing Brillouin frequency shifts contributed by multiple acoustic modes in SSMF[J]. Optics Express, 26, 28793-28807(2018).

[9] FLOREA C, BASHKANSKY M, DUTTON Z et al. Stimulated Brillouin scattering in single-mode As2S3 and As2Se3 chalcogenide fibers[J]. Optics Express, 14, 12063-12070(2006).

[10] MÄGI E C, FU L B, NGUYEN H C et al. Enhanced Kerr nonlinearity in sub-wavelength diameter As2Se3 chalcogenide fiber tapers[J]. Optics Express, 15, 10324-10329(2007).

[11] BAKER C, ROCHETTE M. Highly nonlinear hybrid AsSe-PMMA microtapers[J]. Optics Express, 18, 12391-12398(2010).

[12] SAXENA B, BAKER C, BAO X Y et al. High birefringent Brillouin frequency shifts in a single-mode As2Se3-PMMA microtaper induced by a transverse load[J]. Optics Letters, 44, 4789-4792(2019).

[13] HORIGUCHI T, KURASHIMA T, TATEDA M. Tensile strain dependence of Brillouin frequency shift in silica optical fibers[J]. IEEE Photonics Technology Letters, 1, 107-108(1989).

[14] MIZUNO Y, NAKAMURA K. Brillouin scattering in polymer optical fibers: fundamental properties and potential use in sensors[J]. Polymers, 3, 886-898(2011).

[15] DEROH M, SYLVESTRE T, CHRETIEN J et al. Towards athermal Brillouin strain sensing based on heavily Germania-doped core optical fibers[J], 4, 030801(2019).

[16] BEUGNOT J C, LAUDE V. Electrostriction and guidance of acoustic phonons in optical fibers[J]. Physical Review B, 86, 224304(2012).

[17] WANG H Y, GAO S, BAKER C et al. Wide-range strain sensor based on Brillouin frequency and linewidth in an As2Se3-PMMA hybrid microfiber[J]. Optics Express, 28, 22933-22945(2020).

[18] BEUGNOT J C, AHMAD R, ROCHETTE M et al. Tunable stimulated Brillouin scattering in hybrid polymer-chalcogenide tapered fibers[C], 88-93(2014).

[19] ABEDIN K S. Observation of strong stimulated Brillouin scattering in single-mode As2Se3 chalcogenide fiber[J]. Optics Express, 13, 10266-10271(2005).

[20] MIZUNO Y, NAKAMURA K. Potential of Brillouin scattering in polymer optical fiber for strain-insensitive high-accuracy temperature sensing[J]. Optics Letters, 35, 3985-3987(2010).

[21] GAO S, BAKER C, CHEN L et al. Simultaneous measurement of temperature and strain in a dual-core As2Se3-PMMA taper[J]. IEEE Photonics Technology Letters, 30, 79-82(2017).

[22] ZOU W, HE Z, HOTATE K. Complete discrimination of strain and temperature using Brillouin frequency shift and birefringence in a polarization-maintaining fiber[J]. Optics Express, 17, 1248-1255(2009).