[1] Du S Y, Guan Z D. Strategic considerations for development of advanced composite technology for large commercial aircraft in China[J]. Acta Materiae Compositae Sinica, 25, 1-10(2008).

[2] Moutier J, Fois M, Picard C. Characterization of carbon/epoxy materials for structural repair of carbon/BMI structures[J]. Composites Part B: Engineering, 40, 1-6(2009).

[3] Zhang G X, Hua X M, Huang Y et al. Investigation on mechanism of oxide removal and plasma behavior during laser cleaning on aluminum alloy[J]. Applied Surface Science, 506, 144666(2020).

[4] Hu D W, Liu Y, Chen H et al. Microstructure and properties of laser cladding Ni-based WC coating on Q960E steel[J]. Chinese Journal of Lasers, 48, 0602120(2021).

[5] Li W Y, Zhang G J, Huang Y et al. UV laser high-quality drilling of CFRP plate with a new interlaced scanning mode[J]. Composite Structures, 273, 114258(2021).

[6] Leone C, Genna S. Heat affected zone extension in pulsed Nd∶YAG laser cutting of CFRP[J]. Composites Part B: Engineering, 140, 174-182(2018).

[7] Leone C, Mingione E, Genna S. Laser cutting of CFRP by quasi-continuous wave (QCW) fibre laser: effect of process parameters and analysis of the HAZ index[J]. Composites Part B: Engineering, 224, 109146(2021).

[8] Mei H H, Cui J L, Cheng Y et al. Experimental study on connection between multiwalled carbon nanotubes and metal electrodes under femtosecond laser irradiation[J]. Chinese Journal of Lasers, 48, 0802019(2021).

[9] Zhai Z Y, Mei X S, Wang W J et al. Research advancement on laser etching technology of silicon carbide ceramic matrix composite[J]. Chinese Journal of Lasers, 47, 0600002(2020).

[10] Fujita M, Ohkawa H, Somekawa T et al. Wavelength and pulsewidth dependences of laser processing of CFRP[J]. Physics Procedia, 83, 1031-1036(2016).

[11] Bluemel S, Jaeschke P, Suttmann O et al. Comparative study of achievable quality cutting carbon fibre reinforced thermoplastics using continuous wave and pulsed laser sources[J]. Physics Procedia, 56, 1143-1152(2014).

[12] Sato Y, Tsukamoto M, Nariyama T et al. Experimental study of CFRP cutting with nanosecond lasers[J]. Transactions of JWRI, 42, 23-26(2013).

[13] Wolynski A, Herrmann T, Mucha P et al. Laser ablation of CFRP using picosecond laser pulses at different wavelengths from UV to IR[J]. Physics Procedia, 12, 292-301(2011).

[14] Fischer F, Romoli L, Kling R. Laser-based repair of carbon fiber reinforced plastics[J]. CIRP Annals, 59, 203-206(2010).

[15] Schmutzler H, Popp J, Büchter E et al. Improvement of bonding strength of scarf-bonded carbon fibre/epoxy laminates by Nd∶YAG laser surface activation[J]. Composites Part A: Applied Science and Manufacturing, 67, 123-130(2014).

[16] Genna S, Leone C, Ucciardello N et al. Increasing adhesive bonding of carbon fiber reinforced thermoplastic matrix by laser surface treatment[J]. Polymer Engineering & Science, 57, 685-692(2017).

[17] Leone C, Genna S. Effects of surface laser treatment on direct co-bonding strength of CFRP laminates[J]. Composite Structures, 194, 240-251(2018).

[18] Hu J, Xu H B. Pocket milling of carbon fiber-reinforced plastics using 532-nm nanosecond pulsed laser: an experimental investigation[J]. Journal of Composite Materials, 50, 2861-2869(2016).

[19] Genna S, Tagliaferri F, Papa I et al. Multi-response optimization of CFRP laser milling process based on response surface methodology[J]. Polymer Engineering & Science, 57, 595-605(2017).

[20] Leone C, Papa I, Tagliaferri F et al. Investigation of CFRP laser milling using a 30 W Q-switched Yb∶YAG fiber laser: effect of process parameters on removal mechanisms and HAZ formation[J]. Composites Part A: Applied Science and Manufacturing, 55, 129-142(2013).

[21] Loutas T H, Sotiriadis G, Tsonos E et al. Investigation of a pulsed laser ablation process for bonded repair purposes of CFRP composites via peel testing and a design-of-experiments approach[J]. International Journal of Adhesion and Adhesives, 95, 102407(2019).

[22] Loutas T H, Sotiriadis G, Bonas D et al. A statistical optimization of a green laser-assisted ablation process towards automatic bonded repairs of CFRP composites[J]. Polymer Composites, 40, 3084-3100(2019).

[23] Holder D, Buser M, Boley S et al. Image processing based detection of the fibre orientation during depth-controlled laser ablation of CFRP monitored by optical coherence tomography[J]. Materials & Design, 203, 109567(2021).

[24] Ledesma R I, Palmieri F L, Lin Y et al. Picosecond laser surface treatment and analysis of thermoplastic composites for structural adhesive bonding[J]. Composites Part B: Engineering, 191, 107939(2020).

[25] Xu H B, Hu J. Modeling of the material removal and heat affected zone formation in CFRP short pulsed laser processing[J]. Applied Mathematical Modelling, 46, 354-364(2017).

[26] Wu E Q, Shi Y F, Li M H et al. In-plane thermal conduction of woven carbon fiber reinforced polymers[J]. Chinese Journal of Lasers, 43, 0703004(2016).