[4] [4] HU X L, YANG Y Q, ZHAO J B, et al. Surface integrity evolution of a Ni-based single crystal superalloy by laser shock peening［J］. Applied Surface Science Advances, 2021, 6: 100183.

[5] [5] HU Y X, GONG C, YAO Z Q, et al. Investigation on the non-homogeneity of residual stress field induced by laser shock peening［J］. Surface and Coatings Technology, 2009, 203(23): 3503-3508.

[6] [6] HU W N, PENG X Y, DING Y, et al. The effect of laser shock processing on the microstructures and properties of 2060 AlLi alloys［J］. Surface and Coatings Technology, 2022, 434: 128208.

[11] [11] ZHU R, ZHANG Y K, SUN G F, et al. Finite element analysis of surface roughness generated by multiple laser shock peening［J］. Rare Metal Materials and Engineering, 2018, 47(1): 33-38.

[12] [12] ZHOU W F, REN X D, YANG Y, et al. Finite element analysis of laser shock peening induced near-surface deformation in engineering metals［J］. Optics & Laser Technology, 2019, 119: 105608.

[14] [14] ZHOU L C, LI Y H, HE W F, et al. Effect of multiple laser shock processing on microstructure and mechanical properties of Ti-5Al-4Mo-4Cr-2Sn-2Zr titanium alloy［J］. Rare Metal Materials and Engineering, 2014, 43(5): 1067-1072.

[16] [16] DING K, YE L. Simulation of multiple laser shock peening of a 35CD4 steel alloy［J］. Journal of Materials Processing Technology, 2006, 178(1-3): 162-169.

[17] [17] ZHANG J H, CHENG X Q, XIA Q X, et al. Influence of laser shot peening parameters on the surface hardness and roughness of 7075 aluminum alloy［J］. Materials Science Forum, 2018, 920: 83-88.

[18] [18] WU J F, ZOU S K, GONG S L, et al. Over peening effect of Al7050 mid-thick plates with continued multiple laser shock peening impacts at the same position［J］. Rare Metal Materials and Engineering, 2020, 49(10):3395-3401.

[19] [19] WANG B H, CHENG L, LI D C. Study on very high cycle fatigue properties of forged TC4 titanium alloy treated by laser shock peening under three-point bending［J］. International Journal of Fatigue, 2022, 156: 106668.

[20] [20] WANG W B, CHEN D L, WANG C, et al. Numerical simulation and experimental investigation of residual stress field for laser shock processing［J］. Journal of Plasticity Engineering, 2010, 17(2): 28-32.

[21] [21] ZHANG X Q, LI H, DUAN S W, et al. Modeling of residual stress field induced in Ti-6Al-4V alloy plate by two sided laser shock processing［J］. Surface and Coatings Technology, 2015, 280: 163-173.

[22] [22] ZHANG X Q, HUANG Z W, CHEN B, et al. Investigation on residual stress distribution in thin plate subjected to two sided laser shock processing［J］. Optics & Laser Technology, 2019, 111: 146-155.

[23] [23] YE C, LIAO Y, CHENG G J. Warm laser shock peening driven nanostructures and their effects on fatigue performance in aluminium alloy 6160［J］. Advanced Engineering Materials, 2010,12(4): 291-297.

[24] [24] YE C, SUSLOV S, LIN D, et al. Microstructure and mechanical properties of copper subjected to cryogenic laser shock peening［J］. Journal of Applied Physics, 2011, 110(8): 083504.

[26] [26] ZHOU J Z, LI J, HUANG S, et al. Influence of cryogenic treatment prior to laser peening on mechanical properties and microstructural characteristics of TC6 titanium alloy［J］. Materials Science and Engineering: A, 2018, 718: 207-215.

[28] [28] YE C, SUSLOV S, KIM B J, et al. Fatigue performance improvement in AISI 4140 steel by dynamic strain aging and dynamic precipitation during warm laser shock peening［J］.Acta Materialia, 2011, 59(3): 1014-1025.

[30] [30] TANG Z H, DONG X, GENG Y X, et al. The effect of warm laser shock peening on the thermal stability of compressive residual stress and the hot corrosion resistance of Ni-based single-crystal superalloy［J］. Optics & Laser Technology, 2022, 146: 107556.

[31] [31] Ballard P. Residual stresses induced by rapid impact-applications of laser shocking［D］. Doctorial Thesis, Ecole Polytechnique, France, 1991.

[32] [32] BRAISTED W, BROCKMAN R. Finite element simulation of laser shock peening［J］. International Journal of Fatigue, 1999, 21(7): 719-724.

[35] [35] CORREA C, DE LARA L R, DAZ M, et al. Effect of advancing direction on fatigue life of 316L stainless steel specimens treated by double-sided laser shock peening［J］. International Journal of Fatigue, 2015, 79: 1-9.

[36] [36] REN X D, ZHOU W F, REN Y P, et al. Dislocation evolution and properties enhancement of GH2036 by laser shock processing: Dislocation dynamics simulation and experiment［J］. Materials Science and Engineering: A, 2016, 654: 184-192.

[37] [37] POZDNYAKOV V, KELLER S, KASHAEV N, et al. Two-step simulation approach for laser shock peening［J］. PAMM, 2019, 19(1): 1-2.

[39] [39] YANG Y Q, ZHAO J B, QIAO H C, et al. The simulation and experiment of In718 in warm laser shock processing without coating［J］. Journal of Russian Laser Research, 2021, 42(3): 340-350.

[42] [42] ZOU S K, WU J F, ZHANG Y K, et al. Surface integrity and fatigue lives of Ti17 compressor blades subjected to laser shock peening with square spots［J］. Surface and Coatings Technology, 2018, 347: 398-406.

[43] [43] LI Y H, ZHOU L C, HE W F, et al. The strengthening mechanism of a nickel-based alloy after laser shock processing at high temperatures［J］. Science and Technology of Advanced Materials, 2013, 14(5): 055010.

[47] [47] SHI X S, FENG X T, TENG J, et al. Effect of laser shock peening on microstructure and fatigue properties of thin-wall welded Ti-6A1-4V alloy［J］. Vacuum, 2021, 184: 109986.

[48] [48] WAN Z D, GUO W, JIA Q, et al. Effects of laser shock peening on microstructure and mechanical properties of TIG welded alloy 600 joints［J］. Materials Science and Engineering: A, 2021, 808: 140914.

[50] [50] KALENTICS N, DE SEIJAS M O V, GRIFFITHS S, et al. 3D laser shock peening-A new method for improving fatigue properties of selective laser melted parts［J］. Additive Manufacturing, 2020, 33: 101112.

[52] [52] LUO X K, DANG N, WANG X. The effect of laser shock peening, shot peening and their combination on the microstructure and fatigue properties of Ti-6Al-4V titanium alloy［J］. International Journal of Fatigue, 2021, 153: 106465.

[53] [53] WU J F, ZOU S K, ZHANG Y K, et al. Microstructures and mechanical properties of β forging Ti17 alloy under combined laser shock processing and shot peening［J］. Surface and Coatings Technology, 2017, 328: 283-291.