[1] [1] LIU Z. Theoretical analysis and experimental study on laser cladding thin-walled parts［D］. Shenyang: Northeastern University, 2020.

[2] [2] MATSUMOTO M, YANG S S, MARTINSEN K, et al. Trends and research challenges in remanufacturing［J］. International Journal of Precision Engineering and Manufacturing-Green Technology, 2016, 3(1): 129-142.

[6] [6] LI Y J, DONG S Y, YAN S X, et al. Deep pit repairing of nodular cast iron by laser cladding NiCu/Fe-36Ni low-expansion composite alloy［J］. Materials Characterization, 2019, 151: 273-279.

[7] [7] KAIERLE S, OVERMEYER L, ALFRED I, et al. Single-crystal turbine blade tip repair by laser cladding and remelting［J］. CIRP Journal of Manufacturing Science and Technology, 2017, 19: 196-199.

[8] [8] LIU S, YU H X, WANG Y, et al. Cracking, microstructure and tribological properties of laser formed and remelted K417G Ni-based superalloy［J］. Coatings, 2019, 9(2): 71.

[10] [10] LIANG C Y, HU Y Z, LIU N, et al. Laser polishing of Ti6Al4V fabricated by selective laser melting［J］. Metals, 2020, 10(2): 191.

[11] [11] CHEN L, ZHANG X Z. Modification the surface quality and mechanical properties by laser polishing of Al/PLA part manufactured by fused deposition modeling［J］. Applied Surface Science, 2019, 492: 765-775.

[12] [12] DU C B, ZHAO Y H, JIANG J C, et al. Pore defects in laser powder bed fusion: Formation mechanism, control method, and perspectives［J］. Journal of Alloys and Compounds, 2023, 944: 169215.

[13] [13] AVILS R, ALBIZURI J, LAMIKIZ A, et al. Influence of laser polishing on the high cycle fatigue strength of medium carbon AISI 1045 steel［J］. International Journal of Fatigue, 2011, 33(11): 1477-1489.

[14] [14] CONG D L, ZHOU H, REN Z N, et al. The thermal fatigue resistance of H13 steel repaired by a biomimetic laser remelting process［J］. Materials & Design, 2014, 55: 597-604.

[15] [15] SPIERINGS A B, STARR T L, WEGENER K. Fatigue performance of additive manufactured metallic parts［J］. Rapid Prototyping Journal, 2013, 19(2): 88-94.

[16] [16] LIU Y F, OUYANG W T, WU H C, et al. Improving surface quality and superficial microstructure of LDED Inconel 718 superalloy processed by hybrid laser polishing［J］. Journal of Materials Processing Technology, 2022, 300: 117428.

[17] [17] MARIANI F E, RIBEIRO K S B, LOMBARDI A N, et al. Effect of laser polishing post-processing technique on the roughness and wear resistance of inconel 625 deposited by laser cladding on AISI 304LStainless steel［J］. Journal of Materials Engineering and Performance, 2021, 30(9): 6713-6721.

[18] [18] ZHAO Y H, DU C B, WANG P F, et al. The mechanism ofIn-situlaser polishing and its effect on the surface quality of nickel-based alloy fabricated by selective laser melting［J］. Metals, 2022, 12(5): 778.

[19] [19] ZHAO Y H, SUN J, LI J F. Effect of rare earth oxide on the properties of laser cladding layer and machining vibration suppressing in side milling［J］. Applied Surface Science, 2014, 321: 387-395.

[21] [21] UKAR E, LAMIKIZ A, LPEZ DE LACALLE L N, et al. Laser polishing of tool steel with CO2 laser and high-power diode laser［J］. International Journal of Machine Tools and Manufacture, 2010, 50(1): 115-125.

[22] [22] YE X Y, MA M X, LIU W J, et al. Synthesis and characterization of high-entropy alloy FeCoNiCuCr by laser cladding［J］. Advances in Materials Science and Engineering, 2011, 2011: 485942.