[3] [3] LIN D Y, XU L Y, JING H Y, et al. A strong, ductile, high-entropy FeCoCrNi alloy with fine grains fabricated via additive manufacturing and a single cold deformation and annealing cycle［J］. Additive Manufacturing, 2020, 36: 101591.

[5] [5] XU J, PENG S, LI Z Y, et al. Remarkable cavitation erosion-corrosion resistance of CoCrFeNiTiMo high-entropy alloy coatings［J］. Corrosion Science, 2021, 190: 109663.

[6] [6] YEH J W, CHEN S K, LIN S J, et al. Nanostructuredhigh-entropy alloys with multiple principal elements: Novel alloy design concepts and outcomes［J］. Advanced Engineering Materials, 2004, 6(5): 299-303.

[8] [8] LI X F, FENG Y H, WANG X, et al. Microstructures and properties of AlCrFeNiMnx high-entropy alloy coatings fabricated by laser cladding on a copper substrate［J］. Journal of Alloys and Compounds, 2022, 926: 166778.

[9] [9] LIU S S, ZHAO G L, WANG X H, et al. Design and characterization of AlNbMoTaCux high entropy alloys laser cladding coatings［J］. Surface and Coatings Technology, 2022, 447: 128832.

[10] [10] WEN J H, ZHANG L J, NING J, et al. Laser additively manufactured intensive dual-phase steels and their microstructures, properties and corrosion resistance［J］. Materials & Design, 2020, 192: 108710.

[11] [11] ZENG J Y, LIAN G F, CHEN C R, et al. Influences of theTiC composite introduction method on the microstructures and properties of Nickel-Based coatings［J］. Optics & Laser Technology, 2022, 156: 108633.

[12] [12] CEN L, DUW B, GONG M C, et al. Effect of high-frequency beam oscillation on microstructures and cracks in laser cladding of Al-Cu-Mg alloys［J］. Surface and Coatings Technology, 2022, 447: 128852.

[13] [13] CHAI L J, WANG C, XIANG K, et al. Phase constitution, microstructure and properties of pulsed laser-clad ternary CrNiTi medium-entropy alloy coating on pure titanium［J］. Surface and Coatings Technology, 2020, 402: 126503.

[14] [14] LI X F, YANG X H, YI D H, et al. Effects of NbC content on microstructural evolution and mechanical properties of laser cladded Fe50Mn30Co10Cr10-xNbC composite coatings［J］. Intermetallics, 2021, 138: 107309.

[15] [15] MA S G, ZHANG Y. Effect of Nb addition on the microstructure and properties of AlCoCrFeNi high-entropy alloy［J］. Materials Science and Engineering: A, 2012, 532: 480-486.

[16] [16] HE F, WANG Z J, CHENG P, et al. Designing eutectic high entropy alloys of CoCrFeNiNbx［J］. Journal of Alloys and Compounds, 2016, 656: 284-289.

[18] [18] XIN B, REN J Y, WANG X Q, et al. Effect of laser remelting on cladding layer of inconel 718 superalloy formed by laser metal deposition［J］. Materials, 2020, 13(21): 4927.

[19] [19] LI X, ZHANG C H, ZHANG S, et al. Design, preparation, microstructure and properties of novel wear-resistant stainless steel-base composites using laser melting deposition［J］. Vacuum, 2019, 165: 139-147.

[20] [20] ZONG L, XU L J, LUO C Y, et al. Mechanical properties and strengthening mechanism of the nano-sized m-ZrO2 ceramic particle reinforced NbMoTaW refractory high-entropy alloy［J］. International Journal of Refractory Metals and Hard Materials, 2023, 113: 106201.

[21] [21] FAZAKAS, ZADOROZHNYY V, VARGA L K, et al. Experimental and theoretical study of Ti20Zr20Hf20Nb20X20 (X=V or Cr) refractory high-entropy alloys［J］. International Journal of Refractory Metals and Hard Materials, 2014, 47: 131-138.

[22] [22] LONGY, LIANG X B, SU K, et al. A fine-grained NbMoTaWVCr refractory high-entropy alloy with ultra-high strength: Microstructural evolution and mechanical properties［J］. Journal of Alloys and Compounds, 2019, 780: 607-617.

[23] [23] WU Y D, CAI Y H, CHEN X H, et al. Phase composition and solid solution strengthening effect in TiZrNbMoV high-entropy alloys［J］. Materials & Design, 2015, 83: 651-660.

[24] [24] YE X X, CHEN B, SHEN J H, et al. Microstructure and strengthening mechanism of ultrastrong and ductile Ti-xSn alloy processed by powder metallurgy［J］. Journal of Alloys and Compounds, 2017, 709: 381-393.

[25] [25] TARASOV S Y, FILIPPOV A V, KOLUBAEV E A, et al. Adhesion transfer in sliding a steel ball against an aluminum alloy［J］. Tribology International, 2017, 115: 191-198.

[26] [26] ZHAO T, ZHANG S, WANG Z Y, et al. Modulating heat input to optimize corrosion and synergistic cavitation erosion-corrosion behavior of Ni201 cladding layer by cold metal transfer［J］. Surface and Coatings Technology, 2022, 443: 128595.

[27] [27] SENKOV O N, SENKOVA S V, MIRACLE D B, et al. Mechanical properties of low-density, refractory multi-principal element alloys of the Cr-Nb-Ti-V-Zr system［J］. Materials Science and Engineering: A, 2013, 565: 51-62.