[1] [1] Liu Chunbo, Lin Feng, Jiang Xianliang. Current state and future development of thermal barrier coating［J］. The Chinese Journal of Nonferrous Metals, 2007, 17(1): 1～13

[2] [2] A. Jadhav, N. P. Padture, F. Wu et al.. Thick ceramic thermal barrier coatings with high durability deposited using solution-precursor plasma spray［J］. Mater. Sci. Eng. A, 2005, 405(1/|2): 313～320

[3] [3] Li Deliang, Cheng Xudong, Ye Weiping et al.. Carbon fiber reinforced zirconia thermal barrier and ablative thick composite coating［J］. Journal of Wuhan University of Technology, 2010, 32(8): 18～21

[4] [4] Niu Wei, Sun Ronglu. Effect of h-BN content on microstructures and wear resistance of laser cladding self-lubricant coatings［J］. Chinese J. Lasers, 2011, 38(8): 0803011

[5] [5] Wang Yanfang, Li Li, Lu Qinglong et al.. Laser cladding Fe-based amorphous coatings on stainless substrate［J］. Chinese J. Lasers, 2011, 38(6): 0603017

[6] [6] L. Pawlowski. Thick laser coatings: a review［J］. Journal of Thermal Spray Technology, 1999, 8(2): 279～295

[7] [7] Chen Changjun, Wang Dongsheng, Wang Maocai. Laser multi-layer cladding of Mg-based alloys［J］. Transactions of Nonferrous Metals Society of China, 2003, 13(1): 78～82

[8] [8] Wu Peigui, Zhang Guangjun. Status and development of multi-layer laser cladding technology［J］. Journal of Shanghai University of Engineering Science, 2009, 23(4): 374～378

[9] [9] Zhang Changchun, Shi Yan. Current status and development of high thickness coating by laser cladding technology［J］. Laser Technology, 2011, 35(4): 448～452

[10] [10] V. Ocelík, U. Oliveira, M. Boer et al.. Thick Co-based coating on cast iron by side laser cladding: analysis of processing conditions and coating properties［J］. Surf. Coat. Technol., 2007, 201(12): 5875～5883

[11] [11] Chen Jing, Zhang Fengying, Tan Hua et al.. Alloying mechanics in moving melt pool during laser solid forming from blended elemental powders［J］. Chinese J. Lasers, 2010, 37(8): 2154～2159

[12] [12] T. M. Yue, Y. P. Su. Laser multi-layer cladding of Zr65Al7.5Ni10Cu17.5 amorphous alloy on magnesium substrates［J］. J. Mater. Sci., 2007, 42(15): 6153～6160

[13] [13] X. L. Wu, Y. S. Hong. Fe-based thick amorphous-alloy coating by laser cladding［J］. Surf. Coat. Technol., 2001, 141(2/3): 141～144

[14] [14] G. J. Xu, M. Kutsuna, Z. J. Liu et al.. Characteristic behaviours of clad layer by a multi-layer laser cladding with powder mixture of Stellite-6 and tungsten carbide［J］. Surf. Coat. Technol., 2006, 201(6): 3385～3392

[15] [15] M. Y. Zhang, C. Ye, Y. J. Erasquin et al.. Laser engineered multilayer coating of biphasic calcium phosphate/titanium nanocomposite on metal substrates［J］. ACS Applied Materials and Interfaces, 2011, 3(2): 339～350

[16] [16] Chen Chuanzhong, Lei Tingquan, Bao Quanhe et al.. Problems and the improving measures in laser remelting of plasma sprayed ceramic coatings［J］. Materials Science & Technology, 2002, 10(4): 431～435

[17] [17] Zhang Wanhong. Present and evolution of laser cladding ceramic coating［J］. Hot Working Technology, 2009, 38(24): 39～42

[18] [18] Y. L. Gao, C. S. Wang, M. Yao et al.. The resistance to wear and corrosion of laser cladding Al2O3 ceramic coating on Mg alloy［J］. Appl. Surf. Sci., 2007, 253(12): 5306～5311

[19] [19] Song Jianli, Deng Qilin, Ge Zhijun et al.. The cracking control technology of laser rapid forming nickel-based alloys［J］. Journal of Shanghai Jiaotong University, 2006, 40(3): 548～552

[20] [20] Cheng Changyuan, Deng Qilin, Song Jianli. The influence of ultrasonic vibration on the process of laser cladding［J］. Electromachining & Mould, 2011, 44(1): 67～70

[21] [21] Y. Wang, C. G. Li, L. X. Guo et al.. Laser remelting of plasma sprayed nanostructured Al2O3-TiO2 coatings at different laser power［J］. Surf. Coat. Technol., 2010, 204(21/|22): 3559～3566

[22] [22] Wang Dongsheng, Tian Zongjun, Shen Lida et al.. Influences of laser remelting on microstructure of nanostructured Al2O3-13wt.%TiO2 coatings fabricated by plasma spraying［J］. Appl. Surf. Sci., 2009, 255(8): 4606～4610

[23] [23] Cui Aiyong, Hu Fangyou, Yi Dexian et al.. Ti-base functional gradient wear-resistance coating prepared by laser［J］. Applied Laser, 2010, 30(5): 370～373

[24] [24] Ma Xianyao, Tao Zengyi, Wang Aihua et al.. Measurement of cohesive strength and analysis of forming cracks for laser remelting of plasma spraying ceramic coatings［J］. Chinese J. Lasers, 1993, 20(1): 73～77

[25] [25] Gao Xuesong, Huang Yinhui, Tian Zongjun et al.. Characteristics and mechanism analysis of nano-sized TiO2 in Al2O3 coating［J］. Journal of Materials Engineering, 2009, (12): 45～48

[26] [26] Wang Dongsheng, Tian Zongjun, Zhang Shaowu et al.. Erosion resistance of conventional and nanostructured plasma sprayed ceramic coatings［J］. Materials Protection, 2011, 44(1): 67～70

[27] [27] Y. T. Pei, T. C. Zuo. Gradient microstructure in laser clad TiC-reinforced Ni-alloy composite coating［J］. Mater. Sci. Eng. A, 1998, 241(1-2): 259～263

[28] [28] Yuan Hongbin, Wang Zehua, Zhang Jingjing et al.. Effect of heat treatment on bonding strength of plasma sprayed Al2O3-13%TiO2 coating［J］. Materials for Mechanical Engineering, 2011, 35(1): 65～68