[1] [1] ALBERTO P. Biochips:technologies and applications ［J］. Materials Science and Engineering:C, 2008,28(4):495-508.

[2] [2] TANG J X,CHEN H,HE N Y. In situ synthesis of DNA microarray by typography printing ［J］.Science in China(Series B), 2006,36(6):493-500. (in Chinese)

[3] [3] DAI Y B, HE N Y, LIU M. Gene chip technique and its application in microbe detection ［J］. Progress in Veterinary Medicine, 2006,27(10):41-46. (in Chinese)

[4] [4] TILLIB S V, MIRZABEKOV A D. Advances in the analysis of DNA sequence variations using oligonucleotide microchip technology［J］.Curr Opin Biotechnol, 2001,12(1):53-58.

[5] [5] SUN J Y, LU X J. Advance in the studies on key techniques of gene chips ［J］. International Journal of Laboratory Medicine, 2009, 30(5): 467-471. (in Chinese)

[6] [6] YANG B, LIU L, LIU Z Y, et al..Line-scanning quasi-confocal fluorescence imaging ［J］. Opt. Precision Eng.,2010,18(5):1028-1034. (in Chinese)

[7] [7] QIAO ZH, JIN Q H, XU B J, et al.. Development and review of MEMS-based Bio-Micro-Dispensers Technology［J］. Micronanoelectronic Technology, 2006,10:483-486. (in Chinese)

[8] [8] KOLTAY P, BIRKENMEIER B, STEGER R, et al.. Massive parallel liquid dispensing in the nanoliter range by pneumatic actuation［C］. Proc Actuator. Bremen, Germany, 2002:235-239.

[9] [9] KOLTAY P, STEGER R, BOHL B, et al.. The dispensing well plate: a novel nanodispenser for the multiparallel delivery of liquids (DWP Part I) ［J］. Sensors and Actuators A, 2004,116:483-491.

[10] [10] EMRE, JRG E, RAINER T. An experimental analysis of the influence of the ink properties on the drop formation for direct thermal inkjet printing of high solid content aqueous 3Y-TZP suspensions ［J］. Journal of the European Ceramic Society, 2010,30(7):1669-1678.

[11] [11] KTUNG H C, AHSAN R. Development and ejection behavior of different material-based electrostatic ink-jet heads［J］. The International Journal of Advanced Manufacturing Technology, 2010,48(1-4):165-173.

[12] [12] VIANY J N, SERON E, PETER W. Nanoprobearrays for the analysis of ultra-low-volume protein samples using piezoelectric liquid dispensing technology ［J］. Journal of Laboratory Automation, 2011,16(2):126-133.

[13] [13] WANG Y, CUI D F, ZHANG L L. Development of novel nano-liter level micro-jet system ［J］. Instrument Technique and Sensor, 2008(5):64-66. (in Chinese)

[14] [14] STREULE W, LINDEMANN T, BIRKLE G, et al.. Pipejet: a simple disposable dispenser for the nano- and microliter range ［J］. Journal of the Association for Laboratory Automation, 2004, 9:300-306.

[15] [15] ZHANG W Y, HOU L Y. Scientific and technological problems of digitalization of microfluids(Part I): concepts, methods and results ［J］. Science & Technology Review, 2005,23(8):4-9. (in Chinese)

[16] [16] ZHANG W Y, HOU L Y. Method, apparatus and application of affecting fluid flow: China，ZL03152948．8［P］. 2006. (in Chinese)

[17] [17] HTRDC, MOST, P. R. CHINA. Single droplet is obtained in femtoliter scale by new microfluids digitalization technology［J］. Basic Scientific Research Express, 2004(4):6-7. (in Chinese)

[18] [18] The Editorial Office of Science and Technology Review. Important progress of science, technology and engineering in China in 2004［J］. 2004，23(2)：58-61. (in Chinese)

[19] [19] Mu L L, HOU L Y, ZHANG W Y. Design of flow cytometry based on microfliuds digitalization technology ［J］. Journal of Chemical Industry and Engineering, 2010,61(4):949-954. (in Chinese)

[20] [20] GENG X, HOU L Y, ZHANG W Y. Implementation of digital dispensing technology for microfluids ［J］. Opt. Precision Eng., 2009,17(8):1902-1907. (in Chinese)

[21] [21] ZHANG X L, HOU L Y, ZHANG W Y. Fabrication of in-line micropipette for digital micro-jetting experiment ［J］. Opt. Precision Eng., 2008,16(11):2221-2227. (in Chinese)

[22] [22] SCHENA M. Microarray Analysis ［M］. Beijing: Science Press, 2004. (in Chinese)

[23] [23] COLD SPRING BIOTECH CORP［EB/OL］.［2011-2-18］.http://www.cs-biotech.com/en/product/