[1] [1] LI V C, BOS F P, YU K Q, et al. On the emergence of 3D printable engineered, strain hardening cementitious composites (ECC/SHCC)[J]. Cem Concr Res, 2020, 132: 106038.

[2] [2] LLORET E, SHAHAB A R, LINUS M, et al. Complex concrete structures Merging existing casting techniques with digital fabrication[J]. Comput Aided Des, 2015, 60: 40-49.

[3] [3] VC LI, Engineered Cementitious Composites (ECC)[M]. Springer, 2019.

[4] [4] HUANG B T, ZHU J X, WENG K F, et al. Ultra-high-strength engineered/strain-hardening cementitious composites (ECC/SHCC): Material design and effect of fiber hybridization[J]. Cem Concr Compos, 2022, 129: 104464.

[6] [6] YU K Q, LI L Z, YU J T, et al. Feasibility of using ultra-high ductility cementitious composites for concrete structures without steel rebar[J]. Eng Struct, 2018, 170: 11-20.

[7] [7] KAMAL A, KUNIEDA M, UEDA N, et al. Evaluation of crack opening performance of a repair material with strain hardening behavior[J]. Cem Concr Compos, 2008, 30(10): 863-871.

[8] [8] CHEN Y X, YU J, LEUNG C K Y. Use of high strength Strain-Hardening Cementitious Composites for flexural repair of concrete structures with significant steel corrosion[J]. Constr Build Mater, 2018, 167: 325-337.

[9] [9] HOU M J, ZHANG D, LI V C. Material processing, microstructure, and composite properties of low carbon Engineered Cementitious Composites (ECC)[J]. Cem Concr Compos, 2022, 134: 104790.

[10] [10] RANADE R, HEARD W F, WILLIAMS B A. Multi-scale mechanical performance of high strength-high ductility concrete[C]// Dynamic Behavior of Materials, Volume 1. Cham: Springer International Publishing, 2016: 93-101.

[11] [11] CUROSU I, LIEBSCHER M, MECHTCHERINE V, et al. Tensile behavior of high-strength strain-hardening cement-based composites (HS-SHCC) made with high-performance polyethylene, aramid and PBO fibers[J]. Cem Concr Res, 2017, 98: 71-81.

[12] [12] HUANG B T, WU J Q, YU J, et al. High-strength seawater sea-sand engineered cementitious composites (SS-ECC): Mechanical performance and probabilistic modeling[J]. Cem Concr Compos, 2020, 114: 103740.

[13] [13] SOLTAN D G, LI V C. A self-reinforced cementitious composite for building-scale 3D printing[J]. Cem Concr Compos, 2018, 90: 1-13.

[14] [14] YU J, LEUNG C K Y. Impact of 3D printing direction on mechanical performance of strain-hardening cementitious composite (SHCC)[C]// First RILEM International Conference on Concrete and Digital Fabrication - Digital Concrete 2018. Cham: Springer International Publishing, 2019: 255-265.

[15] [15] OGURA H, NERELLA V N, MECHTCHERINE V. Developing and testing of strain-hardening cement-based composites (SHCC) in the context of 3D-printing[J]. Materials, 2018, 11(8): 1375.

[16] [16] YE J H, CUI C, YU J T, et al. Effect of polyethylene fiber content on workability and mechanical-anisotropic properties of 3D printed ultra-high ductile concrete[J]. Constr Build Mater, 2021, 281: 122586.

[17] [17] ZHU L L, YAO J, ZHAO Y, et al. Effects of composite cementation system on rheological and working performances of fresh 3D-printable engineered cementitious composites[J]. J Build Eng, 2023, 65: 105801.

[18] [18] ZHAO Y, DUAN Y H, ZHU L L, et al. Characterization of coarse aggregate morphology and its effect on rheological and mechanical properties of fresh concrete[J]. Constr Build Mater, 2021, 286: 122940.

[19] [19] PERROT A, LECOMPTE T, ESTELL P, et al. Structural build-up of rigid fiber reinforced cement-based materials[J]. Mater Struct, 2013, 46(9): 1561-1568.

[21] [21] YOKOTA H, ROKUGO K, SAKATA N. Recommendations for design and construction of high performance fiber reinforced cement composite with multiple fine cracks[M]. Japan Society of Civil Engineers., 2008.

[23] [23] PANDA B, LIM J H, TAN M J. Mechanical properties and deformation behaviour of early age concrete in the context of digital construction[J]. Compos Part B Eng, 2019, 165: 563-571.

[24] [24] VAN DEN HEEVER M, DU PLESSIS A, KRUGER J, et al. Evaluating the effects of porosity on the mechanical properties of extrusion-based 3D printed concrete[J]. Cem Concr Res, 2022, 153: 106695.

[25] [25] VAN DER PUTTEN J, DEPREZ M, CNUDDE V, et al. Microstructural characterization of 3D printed cementitious materials[J]. Materials, 2019, 12(18): 2993.

[26] [26] CAO M L, XU L, ZHANG C. Rheological and mechanical properties of hybrid fiber reinforced cement mortar[J]. Constr Build Mater, 2018, 171: 736-742.

[27] [27] LAO J C, HUANG B T, XU L Y, et al. Seawater sea-sand Engineered Geopolymer Composites (EGC) with high strength and high ductility[J]. Cem Concr Compos, 2023, 138: 104998.

[28] [28] MAALEJ M, LI V C, HASHIDA T. Effect of fiber rupture on tensile properties of short fiber composites[J]. J Eng Mech, 1995, 121(8): 903-913.

[30] [30] YU K Q, ZHU H, HOU M J, et al. Self-healing of PE-fiber reinforced lightweight high-strength engineered cementitious composite[J]. Cem Concr Compos, 2021, 123: 104209.

[31] [31] QIAN X Q, ZHOU X M, MU B, et al. Fiber alignment and property direction dependency of FRC extrudate[J]. Cem Concr Res, 2003, 33(10): 1575-1581.

[32] [32] BEDE A, SCURTU A, ARDELEAN I. NMR relaxation of molecules confined inside the cement paste pores under partially saturated conditions[J]. Cem Concr Res, 2016, 89: 56-62.

[33] [33] GUO T T, WU T, GAO L M, et al. Compressive strength and electrochemical impedance response of red mud-coal metakaolin geopolymer exposed to sulfuric acid[J]. Constr Build Mater, 2021, 303: 124523.

[34] [34] LIU X F, CAI H C, MA G W, et al. Spray-based 3D concrete printing parameter design model: Actionable insight for high printing quality[J]. Cem Concr Compos, 2024, 147: 105446.