[1] Vreeling J A. OcelíkV, Pei Y T, et al. Laser melt injection in aluminum alloys: On the role of the oxide skin[J]. Acta Materialia, 48, 4225-4233(2000).

[2] Li L, Liu D, Chen Y et al. Electron microscopy study of reaction layers between single-crystal WC particle and Ti-6Al-4V after laser melt injection[J]. Acta Materialia, 57, 3606-3614(2009).

[3] Li F Q, Chen Y B, Li L Q. Microstructure and wear property of surface modification layer produced by laser melt injection WC on Q235 steel[J]. Transactions of the China Welding Institution, 31, 28-32(2010).

[4] Song S Y, Wang L, Hu Y et al. Graded coating produced by laser melt injection under steady magnetic field[J]. Chinese Journal of Lasers, 43, 0503005(2016).

[5] Hu Y, Wang L, Li J H et al. Effect of orientation Lorentz force on molten pool exhaust in laser cladding[J]. Chinese Journal of Lasers, 45, 0802001(2018).

[6] Xu H, Zheng Q G, Ding Z H et al. Study on laser cladding hard alloy with electromagnetic stirring[J]. Laser Technology, 29, 449-451, 469(2005).

[7] Zhang X, Li R Y, Zhao Z Y et al. Influence of external longitudinal magnetic field on weld joint morphology and microstructure in laser-metal inert gas hybrid welding[J]. Chinese Journal of Lasers, 44, 0802008(2017).

[8] Gatzen M, Tang Z. CFD-based model for melt flow in laser beam welding of aluminium with coaxial magnetic field[J]. Physics Procedia, 5, 317-326(2010). http://www.sciencedirect.com/science/article/pii/S1875389210004840

[9] Gatzen M, Tang Z, Vollertsen F. Effect of electromagnetic stirring on the element distribution in laser beam welding of aluminium with filler wire[J]. Physics Procedia, 12, 56-65(2011).

[10] Yu Q, Wang C S. Numerical simulation and experimental analysis of electromagnetic stirring assisted laser additive manufacturing Ni45 alloy[J]. Chinese Journal of Lasers, 45, 0402003(2018).

[11] Bachmann M, Avilov V, Gumenyuk A et al. About the influence of a steady magnetic field on weld pool dynamics in partial penetration high power laser beam welding of thick aluminium parts[J]. International Journal of Heat and Mass Transfer, 60, 309-321(2013).

[12] Bachmann M, Avilov V, Gumenyuk A et al. Experimental and numerical investigation of an electromagnetic weld pool support system for high power laser beam welding of austenitic stainless steel[J]. Journal of Materials Processing Technology, 214, 578-591(2014).

[13] Wang L, Yao J H, Hu Y et al. Suppression effect of a steady magnetic field on molten pool during laser remelting[J]. Applied Surface Science, 351, 794-802(2015). http://www.sciencedirect.com/science/article/pii/S0169433215013203

[14] Crowe C T, Troutt T R, Chung J N. Numerical models for two-phase turbulent flows[J]. Annual Review of Fluid Mechanics, 28, 11-43(1996). http://www.annualreviews.org/doi/abs/10.1146/annurev.fl.28.010196.000303

[15] Yue X A[M]. Solid-liquid two phase flow, 72(1996).

[16] Bachmann M, Avilov V, Gumenyuk A et al. Numerical assessment and experimental verification of the influence of the Hartmann effect in laser beam welding processes by steady magnetic fields[J]. International Journal of Thermal Sciences, 101, 24-34(2016).