[1] Ehsan M A, Kumar A M, Suleiman R K et al. Fabrication of thickness-controlled NiPd nanoalloy thin films as anticorrosive coatings on 316L SS substrates for application in marine environment[J]. Surface and Coatings Technology, 418, 127253(2021).

[2] Ge H H, Zhou G D, Wu W Q. Passivation model of 316 stainless steel in simulated cooling water and the effect of sulfide on the passive film[J]. Applied Surface Science, 211, 321-334(2003).

[3] Stinville J C, Villechaise P, Templier C et al. Plasma nitriding of 316L austenitic stainless steel: experimental investigation of fatigue life and surface evolution[J]. Surface and Coatings Technology, 204, 1947-1951(2010).

[4] Xu Z Z, Wang Z Y, Chen J et al. Effect of rare earth oxides on microstructure and corrosion behavior of laser-cladding coating on 316L stainless steel[J]. Coatings, 9, 636(2019).

[5] Yu M, Zhang H J, Tian Y et al. Role of marine Bacillus subtilis and Pseudomonas aeruginosa in cavitation erosion behaviour of 316L stainless steel[J]. Wear, 514, 204593(2023).

[6] Zhou S F, Xu Y B, Liao B Q et al. Effect of laser remelting on microstructure and properties of WC reinforced Fe-based amorphous composite coatings by laser cladding[J]. Optics & Laser Technology, 103, 8-16(2018).

[7] Zhao W X, Zhou Z, Jie H et al. Microstructure and frictional wear behavior of FeCrNiMo alloy layer fabricated by laser cladding[J]. Acta Metallurgica Sinica, 57, 1291-1298(2021).

[8] Lewis S R, Fretwell-Smith S, Goodwin P S et al. Improving rail wear and RCF performance using laser cladding[J]. Wear, 366, 268-278(2016).

[9] Ren S X, Li J B, Shi Y M et al. Effect of process parameters on microstructure and wear resistance of 20CrMnTi-based laser cladding Ni60A-TiC coating[J]. Chinese Journal of Lasers, 50, 0802207(2023).

[10] Cheng C, Shi W Q, Wu T et al. Study of the effect of TiC content on the morphology and mechanical properties of laser cladding Fe-based coatings[J]. Laser & Optoelectronics Progress, 60, 1914004(2023).

[11] Sun S Y, Wang J L, Xu J H et al. Preparing WC-Ni coatings with laser cladding technology: a review[J]. Materials Today Communications, 37, 106939(2023).

[12] Guo C, Chen J M, Zhou J S et al. Effects of WC–Ni content on microstructure and wear resistance of laser cladding Ni-based alloys coating[J]. Surface and Coatings Technology, 206, 2064-2071(2012).

[13] Weng Z K, Wang A H, Wu X H et al. Wear resistance of diode laser-clad Ni/WC composite coatings at different temperatures[J]. Surface and Coatings Technology, 304, 283-292(2016).

[14] Wu P, Du H M, Chen X L et al. Influence of WC particle behavior on the wear resistance properties of Ni–WC composite coatings[J]. Wear, 257, 142-147(2004).

[15] Shen X H, He X P, Gao L Y et al. Study on crack behavior of laser cladding ceramic-metal composite coating with high content of WC[J]. Ceramics International, 48, 17460-17470(2022).

[16] Xu P H, Zhu L D, Xue P S et al. Multi-track alternated overlapping model suitable for variable laser cladding process parameters[J]. Surface and Coatings Technology, 425, 127706(2021).

[17] Singh S, Goyal D K, Kumar P et al. Influence of laser cladding parameters on slurry erosion performance of NiCrSiBC + 50WC claddings[J]. International Journal of Refractory Metals and Hard Materials, 105, 105825(2022).

[18] Bartkowski D, Bartkowska A, Jurči P. Laser cladding process of Fe/WC metal matrix composite coatings on low carbon steel using Yb: YAG disk laser[J]. Optics & Laser Technology, 136, 106784(2021).

[19] Mohammed S, Rajamure R S, Zhang Z et al. Tailoring corrosion resistance of laser-cladded Ni/WC surface by adding rare earth elements[J]. The International Journal of Advanced Manufacturing Technology, 97, 4043-4054(2018).

[20] Shu F Y, Tian Y, Jiang S S et al. Effect of rare earth oxide CeO2 on microstructure and surface properties of laser cladded CoFeCrNiSiB high-entropy alloy coatings[J]. Materials Research Express, 6, 106517(2019).

[21] Wang R, Wang Y L, Jiang F L et al. Effect of rare earth oxides on the microstructure and properties of Al2O3-ZrO2 laser cladding layer[J]. Laser & Optoelectronics Progress, 59, 1914004(2022).

[22] Ai X Y, Liu Z J, Zou Z X et al. Effect of nano-Y2O3 on the microstructure and properties of WC-reinforced Ni-based composite surfacing layer[J]. Materials, 15, 1665(2022).

[23] Shu D, Dai S C, Wang G et al. Influence of CeO2 content on WC morphology and mechanical properties of WC/Ni matrix composites coating prepared by laser in situ synthesis method[J]. Journal of Materials Research and Technology, 9, 11111-11120(2020).

[24] Liang F L, Li K Y, Shi W Q et al. Effect of CeO2 addition on laser cladding Ni-based/WC composite coatings[J]. Laser Technology, 48, 542-548(2024).

[25] Wang X H, Liu S S, Zhao G L et al. In-situ formation ceramic particles reinforced Fe-based composite coatings produced by ultrasonic assisted laser melting deposition processing[J]. Optics & Laser Technology, 136, 106746(2021).

[26] Huo K, Zhou J Z, Dai F Z et al. Particle distribution and microstructure of IN718/WC composite coating fabricated by electromagnetic compound field-assisted laser cladding[J]. Applied Surface Science, 545, 149078(2021).

[27] Li G J, Li J, Luo X. Effects of high temperature treatment on microstructure and mechanical properties of laser-clad NiCrBSi/WC coatings on titanium alloy substrate[J]. Materials Characterization, 98, 83-92(2014).

[28] Hebbale A M, Tak M, Bathe R. Microstructural studies of composite (Cr3C2‒NiCr) laser clads developed on preheated substrate T91[J]. Transactions of the Indian Institute of Metals, 74, 593-600(2021).

[29] Wang H Z, Cheng Y H, Yang J Y et al. Microstructure and properties of Fe based amorphous coatings deposited by laser cladding under different preheating temperatures[J]. Journal of Non-Crystalline Solids, 602, 122081(2023).

[30] Wu T, Shi W Q, Xie L Y et al. Effect of preheating temperature on geometry and mechanical properties of laser cladding-based stellite 6/WC coating[J]. Materials, 15, 3952(2022).

[31] Dai Q L, Luo C B, You F Y. Crack restraining methods and their effects on the microstructures and properties of laser cladded WC/Fe coatings[J]. Materials, 11, 2541(2018).

[32] Wei Y C, Feng A X, Chen C L et al. Effects of laser remelting on microstructure, wear resistance, and impact resistance of laser-clad Inconel625-Ni/WC composite coating on Cr12MoV steel[J]. Coatings, 13, 1039(2023).

[33] Zhou S F, Zeng X Y, Hu Q W et al. Analysis of crack behavior for Ni-based WC composite coatings by laser cladding and crack-free realization[J]. Applied Surface Science, 255, 1646-1653(2008).

[34] Wang K M, Fu H G, Lei Y P et al. Microstructure and property of Ni60A/WC composite coating fabricated by fiber laser cladding[J]. Materialwissenschaft Und Werkstofftechnik, 46, 1177-1184(2015).

[35] Liang F L, Li K Y, Shi W Q et al. Effect of Y2O3 content on microstructure and corrosion properties of laser cladding Ni-based/WC composite coated on 316L substrate[J]. Coatings, 13, 1532(2023).

[36] Yang Z Z, Hao H, Gao Q et al. Strengthening mechanism and high-temperature properties of H13+WC/Y2O3 laser-cladding coatings[J]. Surface and Coatings Technology, 405, 126544(2021).

[37] Wang K M, Du D, Liu G et al. Microstructure and properties of WC reinforced Ni-based composite coatings with Y2O3 addition on titanium alloy by laser cladding[J]. Science and Technology of Welding and Joining, 24, 517-524(2019).

[38] Cai Y C, Luo Z, Chen Y. Effect of CeO2 on TiC morphology in Ni-based composite coating[J]. High Temperature Materials and Processes, 37, 209-217(2018).

[39] Lu J Z, Han B, Cui C Y et al. Electrochemical and pitting corrosion resistance of AISI 4145 steel subjected to massive laser shock peening treatment with different coverage layers[J]. Optics & Laser Technology, 88, 250-262(2017).

[40] Xu X, Lu H F, Luo K Y et al. Mechanical properties and electrochemical corrosion resistance of multilayer laser cladded Fe-based composite coatings on 4Cr5MoSiV1 steel[J]. Journal of Materials Processing Technology, 284, 116736(2020).

[41] Zhao W, Kong D J. Effects of laser power on immersion corrosion and electrochemical corrosion performances of laser thermal sprayed amorphous AlFeSi coatings[J]. Applied Surface Science, 481, 161-173(2019).

[42] Wang Q Y, Bai S L, Zhang Y F et al. Improvement of Ni‒Cr‒Mo coating performance by laser cladding combined re-melting[J]. Applied Surface Science, 308, 285-292(2014).

[43] Li J H, Kong D J. Effects of mass ratios on salt spray corrosion and electrochemical corrosion behaviors of laser cladded Cr‒Ni coatings[J]. Anti-Corrosion Methods and Materials, 66, 352-359(2019).

[44] Cui C, Wu M P, Miao X J et al. Microstructure and corrosion behavior of CeO2/FeCoNiCrMo high-entropy alloy coating prepared by laser cladding[J]. Journal of Alloys and Compounds, 890, 161826(2022).

[45] Natarajan J, Yang C H, Karuppasamy S S. Investigation on microstructure, nanohardness and corrosion response of laser cladded colmonoy-6 particles on 316L steel substrate[J]. Materials, 14, 6183(2021).

[46] Xu C G, Du L Z, Yang B et al. Study on salt spray corrosion of Ni–graphite abradable coating with 80Ni20Al and 96NiCr‒4Al as bonding layers[J]. Surface and Coatings Technology, 205, 4154-4161(2011).

[47] Zhang Z Q, Yang Q, Yang F et al. Comparative investigation on wear properties of composite coatings with varying CeO2 contents[J]. Coatings, 12, 906(2022).