[1] [1] Weng F, Chen C Z, Yu H J. Research status of laser cladding on titanium and its alloys: A review［J］. Materials & Design, 2014, 58: 412-425.

[2] [2] Altus E, Konstantino E. Optimum laser surface treatment of fatigue damaged Ti-6Al-4V alloy［J］. Materials Science & Engineering A, 2001, 302(1): 100-105.

[3] [3] Cui Aiyong, Hu Fangyou, Hui Li. Microstructure and wear-resisting property of (Ti+Al/Ni)/(Cr2O3+CeO2) laser cladding on titanium alloy［J］. Chinese J Lasers, 2007, 34(3): 438-441.

[4] [4] Li Fuquan, Wang Shuli, Chen Yanbin, et al. Investigation of bioceramic composite coatings fabricated by laser cladding on Ti6Al4V surface［J］. Chinese J Lasers, 2015, 42(6): 0603005.

[5] [5] Li Min, Huang Jian, Zhu Yanyan, et al. Effect of BN content on microstructure evolution and wear property of in situ Ti/(TiB+TiN) hybrid composite coating by laser cladding［J］. Chinese J Lasers, 2015, 42(9): 0903001.

[6] [6] Feng Shurong, Zhang Shuquan, Wang Huaming. Wear resistance of laser clad hard particles reinforced intermetallic composite coating on TA15 alloy［J］. Chinese J Lasers, 2012, 39(2): 0203002.

[7] [7] Lin Yinghua, Chen Zhiyong, Li Yuehua, et al. Microstructure and hardness characteristic of in-situ synthesized TiB coating by laser cladding on TC4 titanium alloy［J］. Infrared and Laser Engineering, 2012, 41(10): 2694-2698.

[8] [8] Yu Pengcheng, Liu Xiubo, Lu Xiaolong, et al. High-temperature tribological properties of laser cladding composite coatings on Ti6Al4V alloy［J］. Tribology, 2015, 35(6): 737-745.

[9] [9] Li J N, Chen C Z, Wang D G, et al. Microstructures and wear properties of YPSZ/CeO2 reinforced composites deposited by laser cladding［J］. Composites Part B, 2012, 43(3): 896-901.

[10] [10] Qiao Shijie, Liu Xiubo, Zhai Yongjie, et al. High temperature tribological properties of laser cladding titanium matrix self-lubricating wear resistant composite coating on TA2 alloy［J］. Chinese J Lasers, 2016, 43(12): 1202008.

[11] [11] Stanford N, Atwell D, Beer A, et al. Effect of microalloying with rare-earth elements on the texture of extruded magnesium-based alloys［J］. Scripta Materialia, 2008, 59(7): 772-775.

[12] [12] Quazi M M, Fazal M A, Haseeb A S M A, et al. Effect of rare earth elements and their oxides on tribo-mechanical performance of laser claddings: A review［J］. Journal of Rare Earths, 2016, 34(6): 549-564.

[13] [13] Tian Y S, Chen C Z, Chen L X, et al. Effect of RE oxides on the microstructure of the coatings fabricated on titanium alloys by laser alloying technique［J］. Scripta Materialia, 2006, 54(5): 847-852.

[14] [14] Li J, Luo X, Li G J. Effect of Y2O3 on the sliding wear resistance of TiB/TiC-reinforced composite coatings fabricated by laser cladding［J］. Wear, 2014, 310(1/2): 72-82.

[15] [15] Liu X B, Yu R L. Effects of La2O3 on microstructure and wear properties of laser clad γ/Cr7C3/TiC composite coatings on TiAl intermatallic alloy［J］. Materials Chemistry and Physics, 2007, 101(2/3): 448-454.

[16] [16] Li M, Huang J, Zhu Y Y, et al. Effect of heat input on the microstructure of in-situ synthesized TiN-TiB/Ti based composite coating by laser cladding［J］. Surface and Coatings Technology, 2012, 206(19/20): 4021-4026.

[17] [17] Li J, Wang H P, Li M P, et al. Effect of yttrium on microstructure and mechanical properties of laser clad coatings reinforced by in situ synthesized TiB and TiC［J］. Journal of Rare Earths, 2011, 29(5): 477-483.

[18] [18] Zhao Gaomin, Wang Kunlin, Li Chuangang. Effect of La2O3 on wear resistance of laser-cladded Fe-based alloy coatings［J］. Tribology, 2004, 24(4): 318-321.