[1] Qiu Li, Tian Xi, Wu Weiye, . Electromagnetic flanging forming effect of bidirectional loading tube fittings based on magnetic field shaper[J]. Journal of Netshape Forming Engineering, 14, 17-24(2022).

[2] Zhang Wuming, Qiu Li, Zhang Wang, . Influence of discharge timing on electromagnetic flanging of tube with bidirectional loading[J]. Journal of Netshape Forming Engineering, 13, 84-91(2021).

[3] Xiong Qi, Tang Hongtao, Wang Muxue, . Research progress of electromagnetic forming technique since 2011[J]. High Voltage Engineering, 45, 1171-1181(2019).

[4] Qiu Li, Yu Yijie, Xiong Qi, et al. Analysis of electromagnetic force and deformation behavior in electromagnetic tube expansion with concave coil based on finite element method[J]. IEEE Transactions on Applied Superconductivity, 28, 1-5(2018).

[5] Xiong Qi, Yang Meng, Zhou Lijun, . Eddy currents competition in electromagnetic forming process of plates by double-coil attraction[J]. Transactions of China Electrotechnical Society, 36, 2007-2017(2021).

[6] Qiu Li, Yu Yijie, Nie Xiaopeng, . Study on material deformation performance and electromagnetic force loading in electromagnetic tube expansion process[J]. Transactions of China Electrotechnical Society, 34, 212-218(2019).

[7] [7] Yang Shu. Research on technologies of tube magic pulse flanging[D]. Harbin: Harbin Institute of Technology, 2011: 68

[8] Bai Xueshan, Yin Yanguang, Zhao Tianzhang. Electromagnetic flanging of 5A02 aluminum alloy T-shaped tube for aviation[J]. Journal of Plasticity Engineering, 28, 24-29(2021).

[9] Ou Hang, An Hao, Sun Shijin, . Numerical simulation study on oblique hole-flanging with 5182 aluminum alloy produced by electromagnetic forming (EMF)[J]. Journal of Netshape Forming Engineering, 13, 9-15(2021).

[10] [10] Li Yantao. Research on electromagic tube flanging with radialaxial electromagic fce loading[D]. Yichang: China Three Gges University, 2020: 3037

[11] Zhang Wang, Wang Yudong, Li Yantao, . Theory and experiment of tube electromagnetic flanging based on bidirectional electromagnetic force loading[J]. Transactions of China Electrotechnical Society, 36, 2904-2911(2021).

[12] Xiong Qi, Tang Hongtao, Deng Changzhen, et al. Electromagnetic attraction-based bulge forming in small tubes: fundamentals and simulations[J]. IEEE Transactions on Applied Superconductivity, 28, 0600505(2018).

[13] Xiong Qi, Tang Hongtao, Wang Muxue, et al. Design and implementation of tube bulging by an attractive electromagnetic force[J]. Journal of Materials Processing Technology, 273, 116240(2019).

[14] Xiong Qi, Huang Hao, Xia Liangyu, et al. A research based on advance dual-coil electromagnetic forming method on flanging of small-size tubes[J]. The International Journal of Advanced Manufacturing Technology, 102, 4087-4094(2019).

[15] Xiong Qi, Gao Dun, Li Zhe, et al. Electromagnetic attraction bulging of small aluminum alloy tube based on a field shaper[J]. The International Journal of Advanced Manufacturing Technology, 117, 511-521(2021).

[16] Xiong Qi, Li Zhe, Tang Jianhua, et al. A flexible and economical method for electromagnetic flanging of tubes with field shapers[J]. The International Journal of Advanced Manufacturing Technology, 116, 1169-1177(2021).

[17] Xiong Qi, Li Qingshan, Li Zhe, . Influence and mechanism of field shaper on heating of electromagnetic forming drive coil[J]. Transactions of China Electrotechnical Society, 38, 285-296(2020).

[18] Xiong Qi, Song Xianqi, Yang Meng, et al. Future trends in magnetic source device design for magnetic targeted drug delivery system[J]. International Journal of Applied Electromagnetics and Mechanics, 67, 261-277(2021).

[19] Qiu Li, He Chenjun, Zhang Wang. Study on electromagnetic force distribution and axial uniform deformation of dual-tube electromagnetic constraint forming[J]. Electrical Measurement & Instrumentation, 58, 128-135(2021).

[20] Zhang Zhongyuan, Rui Haoran, Liu Hechen, . Simulation analysis of sheath overvoltage characteristic for single-phase ground fault in high voltage single-core cable[J]. Electrical Measurement & Instrumentation, 55, 115-119(2018).

[21] [21] Tang Hongtao. Design implementation of tube bulging by an attractive electromagic fce[D]. Yichang: China Three Gges University, 2019: 1617

[22] Cao Quanliang, Lai Zhipeng, Xiong Qi, et al. Electromagnetic attractive forming of sheet metals by means of a dual-frequency discharge current: design and implementation[J]. The International Journal of Advanced Manufacturing Technology, 90, 309-316(2017).

[23] [23] Huang Hao. Research on electromagic calibration of the sheet metal based on the field shaper[D]. Yichang: China Three Gges University, 2019: 2425

[24] Li Zhenhao, Cao Quanliang, Lai Zhipeng, . Application of current filament method on the calculation of current and force in electromagnetic forming[J]. Transactions of China Electrotechnical Society, 33, 4181-4190(2018).

[25] Cao Quanliang, Han Xiaotao, Lai Zhipeng, et al. Analysis and reduction of coil temperature rise in electromagnetic forming[J]. Journal of Materials Processing Technology, 225, 185-194(2015).

[26] Du Limeng, Xia Liangyu, Li Xian, et al. Adjustable current waveform via altering the damping coefficient: a new way to reduce Joule heating in electromagnetic forming coils[J]. Journal of Materials Processing Technology, 293, 117086(2021).

[27] [27] Yang Meng. Research on electromagic fming law of attracting sheet metal based on dualcoil[D]. Yichang: China Three Gges University, 2021: 2122

[28] Xiong Qi, Yang Meng, Liu Xin, et al. A dual-coil method for electromagnetic attraction forming of sheet metals[J]. IEEE Access, 8, 92708-92717(2020).