[1] [1] J. Y. Kim, A. Garg, E. J. Rymaszewski et al.. High frequency response of amorphous tantalum oxide thin film[J]. IEEE Trans. Components and Packaging Technologies, 2001, 24(3): 526～533

[2] [2] Dai Wuling, Dai Guoguang, Jin Hui. Ta2O5 coating materials[J]. Optical Instrument, 2001, 23(5): 221～225

[3] [3] Yang Shenghai, Liu Yinyuan, Qiu Guanzhou et al.. Recent progress in preparation of Ta2O5 film by CVD using Ta(OC2H5)5 as precursor[J]. Rare Metal Materials and Engineering, 2007, 36(12)： 2075～2059

[4] [4] Zhang Guangyong, Xue Yiyu, Guo Peitao et al.. The research of electron beam evaporation deposits the Ta2O5 optical thin-film[J]. Piezoelectrics & Acoustooptics, 2008, 30(1)： 12～15

[5] [5] Du Jifu, Zhan Changyong, Huang Ningkang. Microanalysis of tantalum oxide films deposited by dynamic ion beam mixing[J]. J. Functional Material and Devices, 2007, 13(6)： 512～516

[6] [6] O. Banakha, T. Heulin, P. E. Schmid et al.. Influence of process parameters on the properties of the tantalum oxynitride thin films deposited by pulsing reactive gas sputtering[J]. J. Vac. Sci. Technol., 2006, 24: 328～333

[7] [7] S. G. Yoona, Y. T. Kima, H. K. Kimb et al.. Comparision of residual stress and optical properties in Ta2O5 thin films deposited by single and dual ion beam sputtering[J]. Materials Science and Engineering B, 2005, 118(1～3): 234～237

[8] [8] Z. Todorova, N. Donkov, Z. Ristic et al.. Electrical and optical characteristics of Ta2O5 thin films deposited by electron-beam vapor deposition[J]. Plasma Processes and Polymers, 2006, 3: 174～178

[9] [9] Xu Cheng, Dong Hongcheng, Xiao Qiling et al.. Optical properties and laser-induced damage threshold of Ta2O5 films deposited by different methods[J]. Chinese J. Lasers, 2008, 35(10)： 1595～1599

[10] [10] Gao Weidong, Huang Jianbing, Xu Xueke et al.. Laser-induced damage of Ta2O5 / SiO2 two-cavity narrow-band interference filters[J]. Chinese J. Lasers, 2005, 32(3)： 384～388

[11] [11] Shao Shuying, Tian Guangle, Fan Zhengxiu et al.. Influences of the deposition parameters and aging time on the residual stress of SiO2 films[J]. Acta Optica Sinica, 2005, 25(1): 126～130

[12] [12] Wang Congjuan, Jin Yunxia, Shao Jianda et al.. Influence of three post-treatment methods on properties of ZrO2 thin films[J]. Chinese J. Lasers, 2008, 35(10)： 1601～1604

[13] [13] J. P. Masse, H. Szymanowski, O. Zabeida et al.. Stability and effect of annealing on the optical properties of plasma deposited Ta2O5 and Nb2O5 films[J]. Thin Solid Films, 2006, 515(4): 1674～1682

[14] [14] R. M. Todi, K. B. Sundaram, A. P. Warren et al.. Investigation of oxygen annealing effects on RF sputter deposited SiC thin films[J]. Solid-State Electronics, 2006, 50(7～8): 1189～1193

[15] [15] M. Schmidt, M. C. Lemme, H. Kurz et al.. Impact of H2/N2 annealing on interface defect densities in Si(100)/SiO2/HfO2/TiN gate stacks[J]. Microelectronic Engineering, 2005, 80(1): 70～73

[16] [16] Guo Peitao, Xue Yiyu, Zhang Guangyong et al.. Influence of Ta2O5 thin-film surface appearance and optical property[J]. Vaccum, 2007, 44(5)： 32～35

[17] [17] Hu Xiaofeng, Xue Yiyu, Guo Aiyun. Effect of annealing on the optical properties of Ti3O5 films prepared by vacuum evaporation[J]. Optical Equipment, 2006, 28(2)： 80～83

[18] [18] Lai Fachun, Zhai Yan, Zhan Renhui et al.. Effect of annealing on the structure and optical properties of TiO2 and Ta2O5 films[J]. Fujian Normal University J. (Natural Sciences), 2006, 22(1): 53～36

[19] [19] S. G. Yoon, S. M. Kang, D. H. Yoon. Post-annealing effects on the structural properties and residual stress of Ta2O5 thin films deposited by ion beam sputtering[J]. J. Optoelectronics and Advanced Materials, 2007, 9(5): 1246～1249

[20] [20] T. Neubert, F. Neumann, K. Schiffmann et al.. Investigations on oxygen diffusion in annealing processes of non-stoichiometric amorphous indium tin oxide thin films[J]. Thin Solid Films, 2006, 513： 319～324