[1] [1] Wang Haibo, Zhang Dejin, He Li. Research on large stockyard laser measurement methods[J]. Chinese J Lasers, 2013, 40(5): 0508002.

[2] [2] Kim Byung-In, Koo Jeongin, Park Brian Sung. A raw material storage yard allocation problem for a large-scale steelworks[J]. International Journal of Advanced Manufacturing Technology, 2009, 41(9): 880-884.

[3] [3] Fojtik D Measurement of the volume of material on the Conveyor Belt measuring of the volume of wood chips during transport on the Conveyor Belt using a laser scanning[C]. 15th International Carpathian Control Conference (ICCC), 2014: 121-124.

[4] [4] Diskin Y, Asari, V K. Dense 3D point-cloud model using optical flow for a monocular reconstruction system[C]. 2013 IEEE Applied Imagery Pattern Recognition Workshop: Sensing for Control and Augmentation, 2013: 1-6.

[5] [5] Gui-ji Tang, Tao Peng. Non-contact measurement of object based on binocular stereo vision[C]. 5th International Congress on Image and Signal Processing (CISP), 2012: 267-270.

[6] [6] Zhou Sen, Guo Yongcai, Gao Chao. Development of a laser-based geometric measurement system for large-scale conical[J]. Chinese J Lasers, 2014, 41(5): 0508008.

[7] [7] Hu Jinzhong, Yu Xiaofen, Ren Xing, et al.. Optical layout of three-dimensional coordinate measurement system based on laser multilateration[ J]. Chinese J Lasers, 2014, 41(7): 0708001.

[8] [8] Li Lei, Yan Jie, Ruan Youtian. Calibration of vehicle-borne laser mapping system[J]. Chinese Optics, 2013, 6(3): 353-358.

[9] [9] Kang Yongwei, Zhong Ruofei, Wu Yu. Research of calibrating vehicle laser scanner′s external parameters[J]. Infrared and Laser Engineering, 2008, 37(S3): 249-253.

[10] [10] Guo Yang, Du Zhengchun, Yao Zhenqiang. Calibration method of three dimensional (3D) laser measurement system based on projective transformation[C]. 2011 Third International Conference on Measuring Technology and Mechatronics Automation (ICMTMA), 2011, 1: 666-671.

[11] [11] Lao Dabao, Yang Xueyou, Zhu Jigui, et al.. Optimization of calibration method for scanning planar laser coordinate measurement system [J]. Optics and Precision Engineering, 2011, 19(4): 870-877.

[12] [12] González-Jorge H, Riveiro B, Armesto J, et al.. Procedure to evaluate the accuracy of laser-scanning systems using a linear precision electro-mechanical actuator[J]. Sci Meas Technol, 2012, 6(1): 6-12.

[13] [13] Liu Zhengjun, Li Qi, Wang Qi. Target recongnition of coherent ladar range image using feature selection[J]. Chinese J Lasers, 2013, 40 (8): 0814003.

[14] [14] Hebel Marcus, Stilla Uwe. Simultaneous calibration of ALS systems and alignment of multiview LiDAR scans of urban areas[J]. IEEE Transactions on Geoscience and Remote Sensing, 2012, 50(6): 2364-2379.

[15] [15] Bazin Jean-Charies, Pollefeys Marc. 3-line RANSAC for orthogonal vanishing point detection[C]. 2012 IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS), 2012: 4282- 4287.

[16] [16] Haifeng L, Rong C. Optimal line feature generation from low-level line segments under RANSAC framework[C]. 26th Chinese Control and Decision Conference (CCDC), 2014: 4589-4593.