[1] [1] Shen Yifu, Zhang Shenghai. Current research status and development trends of laser welding[J]. Chinese J Lasers, 2012, 39(s1): 103002.

[2] [2] Killi A, Zawischa I, Sutter D, et al.. Current status and development trends of disk laser technology[C]. SPIE, 2008, 6871: 68710L.

[3] [3] Zhao Lin, Tsukamoto Susumu, Zhang Yan, et al.. Influence of welding parameters on weld depth and porosity in high power fiber laser welding [J]. Chinese J Lasers, 2013, 40(11): 1103004.

[4] [4] Chen Genyu, Zhou Yu, Zhang Mingjun, et al.. Study on improving the surface quality of the weld of autogenously laser welding of the thick plate with high power fiber laser[J]. Chinese J Lasers, 2013, 40(11): 1103011.

[5] [5] Karlsson J, Kaplan A F H. Analysis of a fibre laser welding case study, utilising a matrix flow chart[J]. Applied Surface Science, 2011, 257(9): 4113-4122.

[6] [6] Pei Yinglei, Wu Aiping, Shan Jiguo, et al.. Investigation of humping formation based on melt flow analysis in high-speed laser welding process[J]. Acta Metallurgica Sinica, 2013, 49(6): 725-730.

[7] [7] Thomy C, Seefeld T, Vollertsen F. Humping effect in welding of steel with single-mode fibre laser[J]. Welding in the World, 2008, 52(5-6): 9-18.

[8] [8] Berger P, Hügel H, Hess A, et al.. Understanding of humping based on conservation of volume flow[J]. Physics Procedia, 2011, 12(A): 232-240.

[9] [9] Zhou J, Tsai H L, Wang P C. Transport phenomena and the associated humping formation in laser welding[C]. ASME 2005 International Mechanical Engineering Congress and Exposition, 2005. 945-953.

[10] [10] Ilar T, Eriksson I, Powell J, et al.. Root humping in laser welding-an investigation based on high speed imaging[J]. Physics Procedia, 2012, 39: 27-32.

[11] [11] Haug P, Rominger V, Speker N, et al.. Influence of laser wavelength on melt bath dynamics and resulting seam quality at welding of thick plates[J]. Physics Procedia, 2013, 41: 49-58.

[12] [12] Zhang Yi. The Simulation Research on the Keyhole Effect of Deep Penetration Laser Welding Based on a Novel“Sandwich”Method [D]. Changsha: Hunan University, 2005.

[13] [13] Xiangzhong Jin, Lijun Li, Yi Zhang. An experimental study on the keyhole shapes in deep penetration laser welding[J]. Optics and Lasers in Engineering, 2004, 41: 779-790.

[14] [14] Li S, Chen G, Zhang M, et al.. Dynamic keyhole profile during high-power deep-penetration laser welding[J]. Journal of Materials Processing Technology, 2014, 214(3): 565-570.

[15] [15] Matsunawa A, Semak V. The simulation of front keyhole wall dynamics during laser welding[J]. Journal of physics D: Applied physics, 1997, 30(5): 798.

[16] [16] Pang Shengyong. A Study on the Transient Keyhole and Moving Weld Pool Behaviors and Mechanisms of Deep Penetration Laser Welding[D]. Wuhan: Huazhong University of Science and Technology, 2011.

[17] [17] Eriksson I, Gren P, Powell J, et al.. New high-speed photography technique for observation of fluid flow in laser welding[J]. Optical Engineering, 2010, 49(10): 100503.