[1] Wang S, Liu S G, Mao Q. A CMM-based method of control point position calibration for light pen coordinate measuring system[J]. Sensors, 20, 5592(2020).

[2] Alblalaihid K, Kinnell P, Lawes S et al. Performance assessment of a new variable stiffness probing system for micro-CMMs[J]. Sensors, 16, 492(2016).

[3] Whitehouse D J. Comparison between stylus and optical methods for measuring surfaces[J]. CIRP Annals, 37, 649-653(1988).

[4] Meng W J, Zhao K S, Wang J H et al. 30 T scanning tunnelling microscope in a hybrid magnet with essentially non-metallic design[J]. Ultramicroscopy, 212, 112975(2020).

[5] Wu Z B, Gao Z Y, Chen X Y et al. A low-temperature scanning probe microscopy system with molecular beam epitaxy and optical access[J]. The Review of Scientific Instruments, 89, 113705(2018).

[6] Ohkubo S. Development of birefringence confocal laser scanning microscope and its application to sample measurements[J]. Journal of Robotics and Mechatronics, 31, 926-933(2019).

[7] Zhang Z Q, Ibrahim M, Fu Y et al. Application of laser scanning confocal microscopy in the soft tissue exquisite structure for 3D scan[J]. International Journal of Burns and Trauma, 8, 17-25(2018).

[8] Paddock S W, Eliceiri K W. Laser scanning confocal microscopy: history, applications, and related optical sectioning techniques[J]. Methods in Molecular Biology, 1075, 9-47(2014).

[9] Griffiths C L, Weeks K J. Optical monitoring of molecular beam epitaxy growth of AlN/GaN using single-wavelength laser interferometry: a simple method of tracking real-time changes in growth rate[J]. Journal of Vacuum Science & Technology B, 25, 1066-1071(2007).

[10] Sagues M, Piñeiro E, Cerri E et al. Two-wavelength phase-sensitive OTDR sensor using perfect periodic correlation codes for measurement range enhancement, noise reduction and fading compensation[J]. Optics Express, 29, 6021-6035(2021).

[11] Min J W, Yao B L, Gao P et al. Dual-wavelength slightly off-axis digital holographic microscopy[J]. Applied Optics, 51, 191-196(2012).

[12] Pavliček P, Mikeska E. White-light interferometer without mechanical scanning[J]. Optics and Lasers in Engineering, 124, 105800(2020).

[13] Luo S J, Suzuki T, Sasaki O et al. Signal correction by detection of scanning position in a white-light interferometer for exact surface profile measurement[J]. Applied Optics, 58, 3548-3554(2019).

[14] Srivastava V, Inam M, Kumar R et al. Single shot white light interference microscopy for 3D surface profilometry using single chip color camera[J]. Journal of the Optical Society of Korea, 20, 784-793(2016).

[15] Yang W J, Liu X J, Lu W L et al. A novel white light interference based AFM head[J]. Journal of Lightwave Technology, 35, 3604-3610(2017).

[16] Dong Z X, Sun X W, Liu W J et al. Measurement of free-form curved surfaces using laser triangulation[J]. Sensors, 18, 3527(2018).

[17] Su X Y, Su L K, Li W S. New Fourier transform profilometry based on modulation measurement[J]. Proceedings of SPIE, 3749, 438-439(1999).

[18] Huang J J, Chen W J, Su X Y et al. Application of wavelet transform in modulation measurement profilometry[J]. Acta Optica Sinica, 36, 0707001(2016).

[19] Zhong M, Chen F, Xiao C. Research on the nonlinearity mitigation by wavelet transform method in modulation profilometry[J]. Laser & Optoelectronics Progress, 54, 071205(2017).

[20] Su L K, Su X Y, Li W S et al. Application of modulation measurement profilometry to objects with surface holes[J]. Applied Optics, 38, 1153-1158(1999).

[21] Dou Y F, Su X Y, Chen Y F. A fast modulation measurement profilometry[J]. Acta Optica Sinica, 29, 1858-1862(2009).

[22] Lu M T, Su X Y. Vertical measurement method for structured light three-dimensional profilometry based on phase-shifting and modulation ratio[J]. Chinese Journal of Lasers, 46, 0704003(2019).

[23] Guo W B, Zhang Q C, Wu Z J. Real-time three-dimensional imaging technique based on phase-shift fringe analysis: a review[J]. Laser & Optoelectronics Progress, 58, 0800001(2021).

[24] Li F Q, Chen W J. Phase error analysis and correction for phase shifting profilometry using crossed grating[J]. Acta Optica Sinica, 41, 1412002(2021).

[25] Zhang H H, Li Y, Zhang Q C. Dynamic 3D shape measurement based on rotating grating projection[J]. Acta Optica Sinica, 41, 2312005(2021).

[26] Yang C Z, Cao Y P. Real-time phase measuring profilometry based on single-shot four-grayscale fringe projection[J]. Acta Optica Sinica, 41, 1812003(2021).

[27] Chang L, Yang J M. Moire fringe phase difference measurement based on correcting MPFFT algorithm[J]. Acta Optica Sinica, 34, 0612006(2014).

[28] Jin H, Zhang M, Zhou G P et al. Phase error restraint method for fringe projection measurement system[J]. Laser & Optoelectronics Progress, 58, 1412001(2021).

[29] Zhong J G, Weng J W. Phase retrieval of optical fringe patterns from the ridge of a wavelet transform[J]. Optics Letters, 30, 2560-2562(2005).

[30] Harding K G, Bieman L H. High-speed moire contouring methods analysis[J]. Proceedings of SPIE, 3520, 27-35(1998).

[31] Zhong M, Chen F, Xiao C. A frequency-based window width optimized two-dimensional S-Transform profilometry[J]. Optics Communications, 402, 1-8(2017).

[32] Zhong M, Cui J, Hyun J S et al. Uniaxial three-dimensional phase-shifting profilometry using a dual-telecentric structured light system in micro-scale devices[J]. Measurement Science and Technology, 31, 085003(2020).

[33] Jing H L, Su X Y, You Z S et al. Uniaxial 3D shape measurement using DMD grating and EF lens[J]. Optik, 138, 487-493(2017).

[34] Jing H L, Su X Y, You Z S. Uniaxial three-dimensional shape measurement with multioperation modes for different modulation algorithms[J]. Optical Engineering, 56, 034115(2017).

[35] Zhong M, Cheng K, Chen F et al. Application of orthogonal fringe patterns in uniaxial microscopic 3D profilometry[J]. OSA Continuum, 3, 3206-3217(2020).

[36] Zhang X Q, Cheng K, Lu Y Y et al. Uniaxial microscale 3D surface shape measurement based on π phase-shifting method[J]. OSA Continuum, 4, 2852-2861(2021).