[1] Guo W, Wan Z D, Peng P et al. Microstructure and mechanical properties of fiber laser welded QP980 steel[J]. Journal of Materials Processing Technology, 256, 229-238(2018).

[2] Jia J, Yang S L, Ni W Y et al. Microstructure and properties of fiber laser welded joints of motor ultrahigh-strength steel 22MnB5 and 22MnB5-Q235[J]. Chinese Journal of Lasers, 41, 1003002(2014).

[3] Yu X, Luo J Q, Xiao X S et al. Research progress of high-power ultrafast fiber lasers[J]. Chinese Journal of Lasers, 46, 0508007(2019).

[4] Gerhards B, Engels O, Olschok S et al. Modified laser beam welding of aluminum-silicon coated 22MnB5[J]. Materialwissenschaft Und Werkstofftechnik, 50, 115-125(2019).

[5] Vakili-Farahani F, Lungershausen J, Wasmer K. Process parameter optimization for wobbling laser spot welding of Ti6Al4V alloy[J]. Physics Procedia, 83, 483-493(2016).

[6] Shah L H, Khodabakhshi F, Gerlich A. Effect of beam wobbling on laser welding of aluminum and magnesium alloy with nickel interlayer[J]. Journal of Manufacturing Processes, 37, 212-219(2019).

[7] Chen X Y, Wang X Y, Zhou L T et al[J]. The research status of laser scanning welding technology Welding Digest of Machinery Manufacturing, 2014, 6-11.

[8] Zou J P. Characteristics of laser scanning welding process for 5A06 aluminum alloy thick plate with narrow gap[D]. Beijing: China Academy of Machinery Science and Technology(2018).

[9] Shan Y, Du J J, Jiang H T et al[J]. Effect of beam scanning on microstructure of laser weld of 5A06 aluminum alloy New Technology & New Process, 2018, 40-43.

[10] Huang D L, Yang Y Q, Yang S N et al. Study on galvanometer scanning fiber laser welding plexiglass technology[J]. China Plastics Industry, 37, 43-45(2009).

[11] Sun Q, Di H S, Li J C et al. Effect of pulse frequency on microstructure and properties of welded joints for dual phase steel by pulsed laser welding[J]. Materials & Design, 105, 201-211(2016).

[12] Du W Z, Huang T, Cao Z et al. TN. 20190709.0835.010.html.(1339).

[13] Tan X J, Hu Y, Guo L et al. The effect of galvanometer spiral scanning welding of 3003 aluminum alloy on weld forming and mechanical properties[J]. Applied Laser, 35, 558-563(2015).

[14] Kaneko M, Tsuji T. A whisker tracing sensor with 5 μm sensitivity. [C]∥Proceedings 2000 ICRA. Millennium Conference. IEEE International Conference on Robotics and Automation. Symposia Proceedings (Cat. No.00CH37065), April 24-28, 2000, San Francisco, CA, USA. New Yor, 3907-3912(2000).

[15] Benyounis K Y, Olabi A G[J]. Hashmi M S J. Effect of laser welding parameters on the heat input, weld-bead profile. Journal of Materials Processing Technology, 164/165, 978-985(2005).

[16] Wang L, Gao M, Zhang C et al. Effect of beam oscillating pattern on weld characterization of laser welding of AA6061-T6 aluminum alloy[J]. Materials & Design, 108, 707-717(2016).

[17] Chen H, Deng L M, Duan J et al. Picosecond laser welding of glasses with a large gap by a rapid oscillating scan[J]. Optics Letters, 44, 2570-2573(2019).

[18] Zhao L, Zhang X D, Chen W Z et al. Repression of porosity with beam weaving laser welding[J]. Transactions of the China Welding Institution, 25, 29-32(2004).

[19] Lomozik M. Effect of the welding thermal cycles on the structural changes in the heat affected zone and on its properties in joints welded in low-alloy steels[J]. Welding International, 14, 845-850(2000).

[20] Wang X N, Chen X M, Sun Q et al. Formation mechanism of δ-ferrite and metallurgy reaction in molten pool during press-hardened steel laser welding[J]. Materials Letters, 206, 143-145(2017).

[21] Chen W J, Chen Q Y, Wang Y J. Effect of heat treatment temperature on dissimilar welded join[J]. China Weld, 22, 60-65(2013).

[22] Wang X Y, Lei W J. Effect of postweld heat-treatment on microstructure and properties of 12Cr1MoVG/12Cr2MoWVTiB steel welded joints[J]. Heat Treatment of Metals, 36, 92-96(2011).

[23] Wang T, Zhang M, Xiong W et al. Microstructure and tensile properties of the laser welded TWIP steel and the deformation behavior of the fusion zone[J]. Materials & Design, 83, 103-111(2015).