[1] Han B, Chen X, Jiang M et al. Laser cladding high‑entropy alloy coating reinforced by carbon nanotubes and its corrosion resistance[J]. Chinese Journal of Lasers, 50, 2402205(2023).

[2] Shuang S, Yu Q, Gao X et al. Tuning the microstructure for superb corrosion resistance in eutectic high entropy alloy[J]. Journal of Materials Science & Technology, 109, 197-208(2022).

[3] Zhang M N, Zhou X L, Wang D F et al. AlCoCuFeNi high-entropy alloy with tailored microstructure and outstanding compressive properties fabricated via selective laser melting with heat treatment[J]. Materials Science and Engineering: A, 743, 773-784(2019).

[4] Lu P, Saal J E, Olson G B et al. Computational materials design of a corrosion resistant high entropy alloy for harsh environments[J]. Scripta Materialia, 153, 19-22(2018).

[5] Lu J, Chen Y, Zhang H et al. Effect of Al content on the oxidation behavior of Y/Hf-doped AlCoCrFeNi high-entropy alloy[J]. Corrosion Science, 170, 108691(2020).

[6] Zhou Z J, Jiang F L, Yang F Z et al. Eutectic behavior and wear and corrosion resistance mechanisms of FeCoNiCrNb0.5Mo0.25 high-entropy alloy laser cladding layer microstructure[J]. Chinese Journal of Lasers, 50, 0402011(2023).

[7] Lanzutti A, Marin E, Tamura K et al. High temperature study of the evolution of the tribolayer in additively manufactured AISI 316L steel[J]. Additive Manufacturing, 34, 101258(2020).

[8] Huang L F, Sun Y N, Ji Y Q et al. Investigation of microstructures and mechanical properties of laser-melting-deposited AlCoCrFeNi2.5 high entropy alloy[J]. Chinese Journal of Lasers, 48, 0602107(2021).

[9] Wu H, Zhang S, Wang Z Y et al. New studies on wear and corrosion behavior of laser cladding FeNiCoCrMox high entropy alloy coating: the role of Mo[J]. International Journal of Refractory Metals and Hard Materials, 102, 105721(2022).

[10] Zhang Q, Wang Q, Han B et al. Comparative studies on microstructure and properties of CoCrFeMnNi high entropy alloy coatings fabricated by high-speed laser cladding and normal laser cladding[J]. Journal of Alloys and Compounds, 947, 169517(2023).

[11] Chen L, Zhang X Z, Wu Y et al. Effect of surface morphology and microstructure on the hot corrosion behavior of TiC/IN625 coatings prepared by extreme high-speed laser cladding[J]. Corrosion Science, 201, 110271(2022).

[12] Schopphoven T, Gasser A, Wissenbach K et al. Investigations on ultra-high-speed laser material deposition as alternative for hard chrome plating and thermal spraying[J]. Journal of Laser Applications, 28, 022501(2016).

[13] Xu Q L, Zhang Y, Liu S H et al. High-temperature oxidation behavior of CuAlNiCrFe high-entropy alloy bond coats deposited using high-speed laser cladding process[J]. Surface and Coatings Technology, 398, 126093(2020).

[14] Zhou Y H, Zhang M N, Chen X X et al. Surface laser polishing of high-entropy CoCrFeNi alloy prepared by laser additive manufacturing[J]. Chinese Journal of Lasers, 50, 2002304(2023).

[15] Zhang Q, Han B, Li M Y et al. Comparison of CoCrFeNi coatings prepared via high-speed laser cladding and normal laser cladding on microstructure and properties[J]. Intermetallics, 153, 107795(2023).

[16] Wang W R, Wang J Q, Sun Z H et al. Effect of Mo and aging temperature on corrosion behavior of (CoCrFeNi)100-xMox high-entropy alloys[J]. Journal of Alloys and Compounds, 812, 152139(2020).

[17] Dai C D, Zhao T L, Du C W et al. Effect of molybdenum content on the microstructure and corrosion behavior of FeCoCrNiMox high-entropy alloys[J]. Journal of Materials Science & Technology, 46, 64-73(2020).

[18] Li Y F, Zhang J, Huang X H et al. Influence of laser power on microstructure evolution and properties of laser cladded FeNiCoCrMo HEA coatings[J]. Materials Today Communications, 35, 105615(2023).

[19] Qiu X W. Microstructure and mechanical properties of CoCrFeNiMo high-entropy alloy coatings[J]. Journal of Materials Research and Technology, 9, 5127-5133(2020).

[20] Wang X L, Muñiz-Lerma J A, Shandiz M A et al. Crystallographic-orientation-dependent tensile behaviours of stainless steel 316L fabricated by laser powder bed fusion[J]. Materials Science and Engineering: A, 766, 138395(2019).

[21] Yang Y C, Ren Y J, Tian Y W et al. Microstructure and tribological behaviors of FeCoCrNiMoSix high-entropy alloy coatings prepared by laser cladding[J]. Surface and Coatings Technology, 432, 128009(2022).

[22] Li K L, Wang D Z, Xing L L et al. Crack suppression in additively manufactured tungsten by introducing secondary-phase nanoparticles into the matrix[J]. International Journal of Refractory Metals and Hard Materials, 79, 158-163(2019).

[23] Du C C, Hu L, Ren X D et al. Cracking mechanism of brittle FeCoNiCrAl HEA coating using extreme high-speed laser cladding[J]. Surface and Coatings Technology, 424, 127617(2021).

[24] Meng Q B, Zhou X L, Li J H et al. High-throughput laser fabrication of Ti-6Al-4V alloy: part I. numerical investigation of dynamic behavior in molten pool[J]. Journal of Manufacturing Processes, 59, 509-522(2020).

[25] Wang P, Zhou X L, Li X G et al. Numerical and experimental investigation of close-coupled twin-nozzle gas atomization towards fine high-entropy alloy powder production[J]. Journal of Materials Processing Technology, 324, 118238(2024).

[26] Shen F M, Tao W, Li L Q et al. Effect of microstructure on the corrosion resistance of coatings by extreme high speed laser cladding[J]. Applied Surface Science, 517, 146085(2020).