[1] [1] STAMBOULI A B, TRAVERSA E. Solid oxide fuel cells (SOFCs): A review of an environmentally clean and efficient source of energy[J]. Renew Sustain Energy Rev, 2002, 6(5): 433-455.

[2] [2] RAMADHANI F, HUSSAIN M, MOKHLIS H, et al. Optimization strategies for Solid Oxide Fuel Cell (SOFC) application: A literature survey[J]. Renew Sustain Energy Rev, 2017, 76: 460-484.

[3] [3] AZREEN J, NURUL A, MAHENDRA R, et al. Review of composite cathodes for intermediate-temperature solid oxide fuel cell applications[J]. Ceram Int, 2020, 46(15): 23314-23325.

[7] [7] LIU W, ZOU Z W, MIAO F X, et al. Anode-supported planar solid oxide fuel cells based on double-sided cathodes[J]. Energy Technol, 2019, 7(2): 240-244.

[8] [8] HAGEN A K, RASMUSSEN J F, THYDEN K. Durability of solid oxide fuel cells using sulfur containing fuels[J]. J Power Sources, 2011, 196(17): 7271-7276.

[9] [9] TRINI M, JRGENSEN P S, HAUCH A, et al. 3D microstructural characterization of Ni/YSZ electrodes exposed to 1 year of electrolysis testing[J]. J Electrochem Soc, 2019, 166(2): F158-F167.

[11] [11] YU J H, PARK G W, LEE S, et al. Microstructural effects on the electrical and mechanical properties of Ni-YSZ cermet for SOFC anode[J]. J Power Sources, 2007, 163(2): 926-932.

[17] [17] ZHONG J, MING S, GUAN K, et al. Application of a database in the evaluation of strengths of Cr-Mo steels by means of small punch test[J]. Int J Mech Sci, 2020, 166: 105195.

[18] [18] RASCHE S, STROBL S, KUNA M, et al. Determination of strength and fracture toughness of small ceramic discs using the small punch test and the ball-on-three-balls test[J]. Procedia Mater Sci, 2014, 3: 961-966.

[22] [22] XIONG Z C, JIANG W, SHI Y, et al. Evaluation of high-temperature strength of Mo/PSZ composites by modified small punch tests[J]. Mater Trans, 2005, 46: 631-636.

[23] [23] SOLTYSIAK S, ABENDROTH M, KUNA M, et al. Strength of fine grained carbon-bonded alumina (Al2O3-C) materials obtained by means of the small punch test[J]. Ceram Int, 2014, 40(7): 9555-9561.

[24] [24] TIMOSHENKO S P, KREIGER S W. Theory of Plates and Shells[M]. New York: McGraw Hill Higher Education, 1964.

[25] [25] SHETTY D K, ROSENFIELD A R, DUCKWORTH W H, et al. A biaxial-flexure test for evaluating ceramic strengths[J]. J Am Ceram Soc, 1983, 66(1): 36-42.

[26] [26] WESTERGAARD H M. Stresses in concrete pavements computed by theoretical analysis[J]. Public Roads, 1926, 7: 25-35.

[29] [29] WEIBULL W. A statistical distribution function of wide applicability[J]. J Appl Mech, 1951, 18(3): 293-297.