[1] Metzner D, Lickschat P, Weißmantel S. Laser micromachining of silicon and cemented tungsten carbide using picosecond laser pulses in burst mode: ablation mechanisms and heat accumulation[J]. Applied Physics A, 125, 462(2019).

[2] Bao Z J, Wang C W, Zhang Y et al. Modification of wettability of stainless steel by picosecond laser surface microstructuring[J]. Photonics Research, 3, 180-183(2015).

[3] Boerner P, Hajri M, Wahl T et al. Picosecond pulsed laser ablation of dielectric rods: angle-dependent ablation process model for laser micromachining[J]. Journal of Applied Physics, 125, 234902(2019).

[4] Gedvilas M, Voisiat B, Raciukaitis G. Grayscale marking of anodized aluminium plate by using picosecond laser and galvanometer scanner[J]. Journal of Laser Micro/Nanoengineering, 9, 267-270(2014).

[5] Ohfuji H, Okuchi T, Odake S et al. Micro-/nanostructural investigation of laser-cut surfaces of single- and polycrystalline diamonds[J]. Diamond and Related Materials, 19, 1040-1051(2010).

[6] Song R, Hou J, Chen S P et al. 157 W all-fiber high-power picosecond laser[J]. Applied Optics, 51, 2497-2500(2012).

[7] Teh P S, Lewis R J, Alam S U et al. 200 W diffraction limited, single-polarization, all-fiber picosecond MOPA[J]. Optics Express, 21, 25883-25889(2013).

[8] Tao Y, Xu Z H, Chen S P. High-energy wavelength-tunable picosecond all-fiber laser based on active mode-locking[J]. Proceedings of SPIE, 11048, 110484D(2019).

[9] lin D, Baktash N, Alam S U et al. 106 W, picosecond Yb-doped fiber MOPA system with a radially polarized output beam[J]. Optics Letters, 43, 4957-4960(2018).

[10] Chen H W, Xi X M, Chen S P et al. Visible supercontinuum generation in tapered photonic crystal fiber pumped by picosecond pulse at 1064 nm[J]. Laser Physics, 22, 1321-1324(2012).

[11] Ma M J, Chen H L, Zhang W X et al. Simulation analysis of the optical properties of a liquid crystal-filled microstructured optical fiber[J]. Materials Research Express, 6, 116203(2019).

[12] Bai Z A, Fan Z W, Bai Z X et al. Optical fiber pumped high repetition rate and high power Nd∶YVO4 picosecond regenerative amplifier[J]. Applied Sciences, 5, 359-366(2015).

[13] Wang Y, Liu B, Ye Z B et al. High peak power and high beam quality fiber-solid hybrid amplification laser system[J]. Chinese Journal of Lasers, 45, 0401007(2018).

[14] Hodgson N, Weber H. Influence of spherical aberration of the active medium on the performance of Nd∶YAG lasers[J]. IEEE Journal of Quantum Electronics, 29, 2497-2507(1993).

[15] Liu C, Riesbeck T, Wang X et al. Influence of spherical aberrations on the performance of dynamically stable resonators[J]. Optics Communications, 281, 5222-5228(2008).

[16] Du K, Wu N, Xu J et al. Partially end-pumped Nd∶YAG slab laser with a hybrid resonator[J]. Optics Letters, 23, 370-372(1998).

[17] Russbueldt P, Mans T, Rotarius G et al. 400 W Yb∶YAG Innoslab fs-amplifier[J]. Optics Express, 17, 12230-12245(2009).

[18] Russbueldt P, Mans T, Hoffmann H D et al. 1100 W Yb∶YAG femtosecond Innoslab amplifier[J]. Proceedings of SPIE, 7912, 79120R(2011).

[19] Mans T, Hönninger C, Dolkemeyer J et al. 200 W fs Innoslab amplifier with 400 J pulse energy for industrial applications[J]. Proceedings of SPIE, 8599, 859915(2013).

[20] Lin H, Li J F, Liang X Y. 105 W, <10 ps, TEM00 laser output based on an in-band pumped Nd∶YVO4 Innoslab amplifier[J]. Optics Letters, 37, 2634-2636(2012).

[21] Mao X J, Mi G J, Pang Q S et al. High power high beam quality in-band pumping picosecond amplification laser system[J]. High Power Laser and Particle Beams, 27, 061001(2015).

[22] Chen W, Liu B W, Song Y J et al. High pulse energy fiber/solid-slab hybrid picosecond pulse system for material processing on polycrystalline diamonds[J]. High Power Laser Science and Engineering, 6, e18(2018).

[23] Mecseki K, Windeler M K R, Miahnahri A et al. High average power 88 W OPCPA system for high-repetition-rate experiments at the LCLS X-ray free-electron laser[J]. Optics Letters, 44, 1257-1260(2019).

[24] Koechner W. Solid-state laser engineering[M](2006).

[25] Sang S H. The research on LD end-pumped Nd∶YVO4 slab laser amplifiers[D], 25-28(2016).

[26] Laporta P, Brussard M. Design criteria for mode size optimization in diode-pumped solid-state lasers[J]. IEEE Journal of Quantum Electronics, 27, 2319-2326(1991).

[27] Song F, Zhang C B, Ding X et al. Determination of thermal focal length and pumping radius in gain medium in laser-diode-pumped Nd∶YVO4 lasers[J]. Applied Physics Letters, 81, 2145-2147(2002).

[28] Wang C H, Liu C, Shen L F et al. 1.6 MW peak power, 90 ps all-solid-state laser from an aberration self-compensated double-passing end-pumped Nd∶YVO4 rod amplifier[J]. Applied Optics, 55, 2399-2403(2016).

[29] Chen W, Song Y J, Hu M L et al. High power, hybrid fiber/solid-slab ultraviolet picosecond pulse laser system with high stability[C]. //Asia Communications and Photonics Conference 2014, November 11-14, 2014, Shanghai, China, ATh3A, 79(2014).

[30] Liu B, Liu C, Shen L F et al. Beam quality management by periodic reproduction of wavefront aberrations in end-pumped Nd∶YVO4 laser amplifiers[J]. Optics Express, 24, 8988-8996(2016).

[31] Dong X Y, Li P X, Li S et al. High gain fiber-solid hybrid double-passing end-pumped Nd∶YVO4 picosecond amplifier with high beam quality[J]. Chinese Physics B, 29, 054207(2020).