[1] [1] WANG J M, JI Y H, LIANG Zh Y, et al. Damage characteristics of a 532 nm picosecond pulse laser on monocrystalline silicon［J］. Chin-ese Optics, 2022, 15(2): 242-250(in Chinese).

[2] [2] NIE Sh L, GUAN Y Ch. Review of UV laser and its applications in micromachining［J］. Opto-Electronic Engineering, 2017, 44(12):1169-1179(in Chinese).

[3] [3] LU H. Interaction between laser and materials under different environmental conditions［D］. Tianjin: Tianjin University, 2017:10-17 (in Chinese) .

[4] [4] ZHANG J P. Research of high-aspect ratio holes drilled by femtose-cond laser［D］. Shanghai: Shanghai Jiao Tong University, 2015:20-26(in Chinese).

[5] [5] UENO I, SHOJI M. Thermal-fluid phenomena induced by nanosecond-pulse heating of materials in water［J］. Journal of Heat Transfer, 2001, 123(6):1123-1132.

[6] [6] ZHOU X, DUAN J, CHEN H, et al. Experimental study about water-assisted laser drill on Al2O3 ceramics without recast layer［J］. Laser Technology, 2018, 42(2):271-275(in Chinese).

[7] [7] ZHU Sh J, ZHANG Ch Y, CHU S L,et al. Research and application of massive micropores water-assisted picosecond laser processing technology［J］.Chinese Journal of Lasers, 2020, 47(3): 03020028 (in Chinese).

[8] [8] DOU H Q, YAO C Z, LIU H, et al. Femtosecond laser ablation of Al-Mg alloy in vacuum and air［J］. Applied Surface Science, 2018, 447(31):388-392.

[9] [9] WANG Q W, YE Y C, PENG Y, et al. Friction and cutting characteristics of micro-textured diamond tools fabricated with femtosecond laser［J］. Tribology International, 2020, 154: 106720.

[10] [10] WANG W J，JIA K，FANG R N, et al. Review on radiation features of laser-induced plasma［J］. Laser Technology, 2022,46(4):499-510(in Chinese).

[11] [11] WANG X, QIN Y, WANG B, et al. Numerical and experimental study of the thermal stress of silicon induced by a millisecond laser［J］. Applied Optics, 2011, 50 (21) :3725-3732.

[12] [12] ZHANG T Zh. Study on the mechanism of melt ejection recast, layer and micro crack formation in millisecond laser drilling［D］. Nanjing:Nanjing University of Science and Technology, 2017:31-33(in Chinese).

[13] [13] ZHONG F Ch, L X M, LI J G, et al. Numerical analysis of thermal effect of the combined laser on single crystal silicon polymers irradiated by high power laser［J］. Laser Technology, 2017, 41(5):637-643(in Chinese).

[14] [14] QI L T, LI X, LIU Y Sh. Process and mechanism for sapphire ablation by singlepulse 266 nm solid-state laser［J］. Journal of Heilongjiang University of Science and Technology, 2020,30(4):416-421 (in Chinese).

[15] [15] CAO Zh Q, XIE X Zh,CHEN W F, et al. Research progress of pressure detection and applications in liquid-assisted laser machining［J］. Opto-Electronic Engineer, 2017, 44(4): 381-392(in Chin-ese).

[16] [16] QI L T, LIU F C. Experimental investigation on 266nm nanosecond solid-state laser drilling on CH film［J］. Laser Technology, 2022, 46(6): 767-772(in Chinese).

[17] [17] BAO J D. Study on the influence of water layer characteristics on quality of under water laser cutting monocrystalline silicon［D］.Gui-lin:Guilin University of Electronic Technology, 2021:28-34(in Ch-inese).

[18] [18] PENG G Ch. Research on characteristics and energy transfer mechanism of laser welding under vacuum for aluminum alloys［D］. Harbin: Harbin Institute of Technology, 2020:20-25 (in Chinese).

[19] [19] ZHANG X Y, ZHANG W, XIA Sh Q, et al. Study on numerical analysis of temperature field and stress field of carbon fiber reinforced polymers irradiated by high power laser［J］. Laser Technology, 2021, 45(5):636-641(in Chinese).

[20] [20] LI G L, SHI D, H H S, et al. Research on the mechanism of laser drilling alumina ceramics in shallow water［J］. The International Journal of Advanced Manufacturing Technology, 2022, 118(11):3631-3639.