[1] Kelly P W, Bevilacqua R, Mazal L et al. TugSat: removing space debris from geostationary orbits using solar sails[J]. Journal of Spacecraft and Rockets, 55, 437-450(2018).

[2] Sun H, Zhang H F, Zhang Z P et al. Experiment on diffuse reflection laser ranging to space debris and data analysis[J]. Research in Astronomy and Astrophysics, 15, 909-917(2015).

[3] Deng H R, Zhang H F, Long M L et al. 4 kHz repetition rate satellite laser ranging system and its application[J]. Acta Optica Sinica, 39, 0314002(2019).

[4] Zhang Z P, Yang F M, Zhang H F et al. The use of laser ranging to measure space debris[J]. Research in Astronomy and Astrophysics, 12, 212-218(2012).

[5] Kirchner G, Koidl F, Friederich F et al. Laser measurements to space debris from Graz SLR station[J]. Advances in Space Research, 51, 21-24(2013). http://www.sciencedirect.com/science/article/pii/S0273117712005492

[6] Li Y Q, Li Z L, Fu H L et al. Experimentation of diffuse reflection laser ranging of space debris[J]. Chinese Journal of Lasers, 38, 0908001(2011).

[7] Long M L, Zhang H F, Deng H R et al. Laser ranging for space debris using double telescopes with kilometer-level distance[J]. Acta Optica Sinica, 40, 0228002(2020).

[8] Zhang Z P, Zhang H F, Long M L et al. High precision space debris laser ranging with 4.2 W double-pulse picosecond laser at 1 kHz in 532 nm[J]. Optik, 179, 691-699(2019). http://www.ingentaconnect.com/content/el/00304026/2019/00000179/00000001/art00090

[9] Rubenchik A M, Fedoruk M P, Turitsyn S K. The effect of self-focusing on laser space-debris cleaning[J]. Light: Science & Applications, 3, e159(2014). http://www.nature.com/lsa/journal/v3/n4/full/lsa201440a.html

[10] Long M L, Chen L Y, Chen M et al. High-power LD side-pump Nd∶YAG regenerative amplifier at 1 kHz repetition rate with volume Bragg gratings (VBG) for broadening and compressor[J]. Applied Physics B, 122, 1-5(2016). http://link.springer.com/10.1007/s00340-016-6424-x

[11] Zhu X N, Bao W X. Fundamentals of ultrashort pulse laser and its applications[J]. Chinese Journal of Lasers, 46, 1200001(2019).

[12] Dong B, Liu L, Tang X J et al. 100-W high-power Nd∶YAG picosecond laser-slab amplifier[J]. Chinese Journal of Lasers, 46, 1101004(2019).

[13] Wang Z W, Wang Z K, Zou F et al. High-peak-power rod-type photonic crystal fiber amplifier for picosecond pulses[J]. Chinese Journal of Lasers, 43, 1001001(2016).

[14] Wang M, Wang F, Yu C L et al. Ultra-low core numerical aperture large mode area photonic crystal fiber with 1 MW peak power output[J]. Acta Optica Sinica, 39, 0536001(2019).

[15] Siders C W. Siders J L W, Taylor A J, et al. Efficient high-energy pulse-train generation using a 2n-pulse Michelson interferometer[J]. Applied Optics, 37, 5302-5305(1998).

[16] Nebel A, Herrmann T, Henrich B et al. Generation of tailored picosecond-pulse-trains for micro-machining[J]. Proceedings of SPIE, 6108, 610812(2006). http://spie.org/Publications/Proceedings/Paper/10.1117/12.645680

[17] Rezaei S, Li J Z, Herman P R. Burst train generator of high energy femtosecond laser pulses for driving heat accumulation effect during micromachining[J]. Optics Letters, 40, 2064-2067(2015).

[18] Men L L, Long M L, Zhang H F et al. Research on weak signal detection ability for burst-pulses laser[J]. Laser & Infrared, 50, 557-562(2020).