[1] [1] GIURGIUTIU V.Structural health monitoring(SHM) of aerospace composites［M］//UK:Woodhead Publishing,2020: 491-558.

[2] [2] ARTAGAN S S,CIAMPOLI L B,D’AMICO F,et al.Non-destructive assessment and health monitoring of railway infrastructures［J］.Surveys in Geophysics,2020,41(3):447-483.

[3] [3] LI Y,HU B,LIU W,et al.Eddy current array and liquid penetrant testing contrast testing on austenite stainless steel piping［C］//［S.l.］:Internationales Congress Center:19th World Conference on Non-Destructive Testing,2016:84-92.

[4] [4] OLISA S C,KHAN M A,STARR A.Review of current guided wave ultrasonic testing(GWUT) limitations and future directions［J］. Sensors,2021,21(3):811.

[5] [5] GARCA-MARTN J,GMEZ-GIL J,VZQUEZ-SNCHEZ E.Non-destructive techniques based on eddy current testing［J］.Sensors,2011,11(3):2525-2565.

[6] [6] VAVILOV V P,BURLEIGH D D.Review of pulsed thermal NDT:Physical principles, theory and data processing［J］.Ndt & E International,2015,73:28-52.

[7] [7] YI X,COOPER J,WANG Y,et al.Wireless crack sensing using an RFID-based folded patch antenna［C］//Lake Como, Italy: Proceeding of the 6th International Conference on Bridge Maintenance,Safety and Management,2012.

[8] [8] ZHANG Jun,HUANG Bei,ZHANG G,et al.Wireless passive ultra high frequency RFID antenna sensor for surface crack monitoring and quantitative analysis［J］.Sensors,2018,18(7):2130.

[9] [9] MARINDRA A M J,TIAN G Y.Chipless RFID sensor tag for metal crack detection and characterization［J］.IEEE Transactions on Microwave Theory and Techniques,2018,66(5):2452-2462.

[12] [12] LIU Zhiping,CHEN Kai,LI Zongchen,et al.Crack monitoring method for an FRP-strengthened steel structure based on an antenna sensor［J］.Sensors,2017,17(10):2394.

[13] [13] YI X,WU T,WANG Y,et al.Sensitivity modeling of an RFID-based strain-sensing antenna with dielectric constant change［J］. IEEE Sensors Journal,2015,15(11):6147-6155.

[14] [14] CACCAMI M C,MANZARI S,MARROCCO G.Phase-oriented sensing by means of loaded UHF RFID tags［J］.IEEE Transactions on Antennas and Propagation,2015,63(10):4512-4520.

[17] [17] LIU H,AL-MAHAIDI R,ZHAOX L.Experimental study of fatigue crack growth behaviour in adhesively reinforced steel structures［J］.Composite Structures,2009,90(1):12-20.

[18] [18] WU C,ZHAO X L,AL-MAHAIDI R,et al.Fatigue tests on steel plates with longitudinal weld attachment strengthened by ultra high modulus carbon fibre reinforced polymer plate［J］.Fatigue & Fracture of Engineering Materials & Structures,2013,36(10):1027-1038.

[19] [19] CARPINTERI A,BRIGHENTI R,HUTH H J,et al.Fatigue growth of a surface crack in a welded T-joint［J］.International Journal of Fatigue,2005,27(1):59-69.