[10] [10] LI Y H, ARTHANARI S, GUAN Y C. Influence of laser surface melting on the properties of MB26 and AZ80 magnesium alloys[J]. Surface and Coatings Technology, 2019, 378: 124964.

[11] [11] ZHANG H, ZHANG C H, WANG Q, et al. Effect of Ni content on stainless steel fabricated by laser melting deposition[J]. Optics & Laser Technology, 2018, 101: 363-371.

[12] [12] YANG H H, MENG L, LUO S C, et al. Microstructural evolution and mechanical performances of selective laser melting Inconel 718 from low to high laser power[J]. Journal of Alloys and Compounds, 2020, 828: 154473.

[13] [13] GUMANN M, BEZENON C, CANALIS P, et al. Single-crystal laser deposition of superalloys: Processing-microstructure maps[J]. Acta Materialia, 2001, 49(6): 1051-1062.

[14] [14] SONG L J, ZENG G C, XIAO H, et al. Repair of 304 stainless steel by laser cladding with 316L stainless steel powders followed by laser surface alloying with WC powders[J]. Journal of Manufacturing Processes, 2016, 24: 116-124.

[15] [15] KURZ W, BEZENON C, GUMANN M. Columnar to equiaxed transition in solidification processing[J]. Science and Technology of Advanced Materials, 2001, 2(1): 185-191.

[17] [17] ZHANG M, ZHAO G L, WANG X H, et al. Microstructure evolution and properties of in situ ceramic particles reinforced Fe-based composite coating produced by ultrasonic vibration assisted laser cladding processing[J]. Surface and Coatings Technology, 2020, 403: 126445.

[18] [18] AMINE T, NEWKIRK J W, EL-SHEIKH H E D F, et al. Microstructural and hardness investigation of tool steel D2 processed by laser surface melting and alloying[J]. The International Journal of Advanced Manufacturing Technology, 2014, 73(9): 1427-1435.

[19] [19] LIU H, SUN S F, ZHANG T, et al. Effect of Si addition on microstructure and wear behavior of AlCoCrFeNi high-entropy alloy coatings prepared by laser cladding[J]. Surface and Coatings Technology, 2021, 405: 126522.

[21] [21] YE X X, CHEN B, SHEN J H, et al. Microstructure and strengthening mechanism of ultrastrong and ductile Ti-xSn alloy processed by powder metallurgy[J]. Journal of Alloys and Compounds, 2017, 709: 381-393.

[22] [22] LI Q, POPOV V L. On the possibility of frictional damping with reduced wear: A note on the applicability ofarchard's law of adhesive wear under conditions of fretting[J]. Physical Mesomechanics, 2018, 21(1): 94-98.

[23] [23] IWASZKO J, STRZELECKA M. Effect of cw-CO2 laser surface treatment on structure and properties of AZ91 magnesium alloy[J]. Optics and Lasers in Engineering, 2016, 81: 63-69.

[24] [24] PARK S H C, SATO Y S, KOKAWA H. Microstructural evolution and its effect on Hall-Petch relationship in friction stir welding of thixomolded Mg alloy AZ91D[J]. Journal of Materials Science, 2003, 38(21): 4379-4383.