[1] [1] LU J, ZHANG J,SUN L CH. Experimental comparison of the characteristics of Y element and Y loop element［J］. Opt. Precision Eng.,2005,13(12): 219-224. (in Chinese)

[2] [2] MENG ZH J,HUANG J,WU ZH. Transmission properties of adhesive single-layer bandpass FSS［J］. Opt.Precision Eng., 2008,26(7): 1247-1252.(in Chinese)

[3] [3] JIA H Y, GAO J S,FENG X G. Novel element frequency selective surface ［J］. Opt. Precision Eng., 2008,16(11): 2076-2080. (in Chinese)

[4] [4] JIA H Y, GAO J S,FENG X G. Influence on polarization independence of frequency selective surface by altering Y slot element arrangement ［J］. Opt. Precision Eng.,2007,15(6): 978-982. (in Chinese)

[5] [5] JIA H Y, GAO J S, FENG X G,et al.. Frequency selective surface with a flat topped passband［J］. Chinese Optics Letters, 2007,5(12): 715-716.

[6] [6] SARABANDI K, BEHDAD N. A frequency selective surface with miniaturized eelments［J］. IEEE Transactions on Antennas and Propagation,2007,55(5): 1239-1245.

[7] [7] DAVID M.Pozar (translated by Zhang ZH Y etc). Microwave Engineering Third Edition ［M］. Beijing: Electronic Industry Press,2008: 194-195.(in Chinese)

[8] [8] MARCUVITZ N. Waveguide Handbook. Lexington［M］. MA: Boston Technical Publishers,1964.

[9] [9] WU T K. Frequency selective surface and grid array［M］. New York: Wiley, 1995.

[10] [10] MUNK B A. Frequency selective surface: theory and design ［M］.New York: Wiley, 2000.

[11] [11] CHEN C C. Transmission of microwave through perforated flat plates of finite thickness［J］. IEEE Trans. Microwave Theory Tech.,1973,21(1): 1-6.