[6] [6] LIU C J, OUYANG K, JIANG T, et al. Fracture failure analysis of gear teeth［J］. Journal of Physics: Conference Series, 2022, 2206(1): 012036.

[9] [9] YAN H Z, ZHU P F, CHEN Z, et al. Determination of the optimal coverage for heavy-duty-axle gears in shot peening［J］. The International Journal of Advanced Manufacturing Technology, 2022, 118(1): 365-376.

[12] [12] HAMMERSLEY G, HACKEL L A, HARRIS F. Surface prestressing to improve fatigue strength of components by laser shot peening［J］. Optics and Lasers in Engineering, 2000,34(4/5/6): 327-337.

[14] [14] PENG C, XIAO Y Z, WANG Y Z, et al. Effect of laser shock peening on bending fatigue performance of AISI 9310 steel spur gear［J］. Optics & Laser Technology, 2017, 94: 15-24.

[22] [22] ZHANG C Y, DONG Y L, YE C. Recent developments and novel applications of laser shock peening: A review［J］. Advanced Engineering Materials, 2021, 23(7): 2001216.

[24] [24] PEYRE P, CHAIEB I, BRAHAM C. FEM calculation of residual stresses induced by laser shock processing in stainless steels［J］. Modelling and Simulation in Materials Science and Engineering, 2007, 15(3): 205-221.

[25] [25] FABBRO R, FOURNIER J, BALLARD P, et al. Physical study of laser-produced plasma in confined geometry［J］. Journal of applied physics, 1990, 68(2): 775-784.

[26] [26] FABBRO R, PEYRE P, BERTHE L, et al. Physics and applications of laser-shock processing［J］. Journal ofLaser Applications, 1998, 10(6): 265-279.

[29] [29] WARREN A, GUO Y, CHEN S. Massive parallel laser shock peening: Simulation, analysis, and validation［J］. International Journal of Fatigue, 2008, 30(1): 188-197.

[30] [30] ZHANG X C, ZHANG Y K, LU J Z, et al. Improvement of fatigue life of Ti-6Al-4V alloy by laser shock peening［J］. Materials Science and Engineering: A, 2010, 527(15): 3411-3415.

[31] [31] ZHOU J Z, HUANG S, SHENG J, et al. Effect of repeated impacts on mechanical properties and fatigue fracture morphologies of 6061-T6 aluminum subject to laser peening［J］. Materials Science and Engineering: A, 2012, 539: 360-368.

[32] [32] BIKDELOO R, FARRAHI G H, MEHMANPARAST A, et al.Multiple laser shock peening effects on residual stress distribution and fatigue crack growth behaviour of 316L stainless steel［J］. Theoretical and Applied Fracture Mechanics, 2020, 105: 102429.

[33] [33] LIU Q, YANG C H, DING K, et al. The effect of laser power density on the fatigue life of laser-shock-peened 7050 aluminium alloy［J］. Fatigue & Fracture of Engineering Materials & Structures, 2007, 30(11): 1110-1124.

[38] [38] HU Y X, GONG C, YAO Z Q, et al. Investigation on the non-homogeneity of residual stress field induced by laser shock peening［J］. Surface and Coatings Technology, 2009, 203(23): 3503-3508.

[40] [40] HU W N, PENG X Y, DING Y, et al. The effect of laser shock processing on the microstructures and properties of 2060 Al Li alloys［J］. Surface and Coatings Technology, 2022, 434: 128208.

[42] [42] WANG Z D, SUN G F, LU Y, et al. Microstructural characterization and mechanical behavior of ultrasonic impact peened and laser shock peened AISI 316L stainlesssteel［J］. Surface and Coatings Technology, 2020, 385: 125403.

[50] [50] ZHU R, ZHANG Y K, SUN G F, et al. Finite element analysis of surface roughness generated by multiple laser shock peening［J］. RareMetal Materials and Engineering, 2018, 47(1): 33-38.

[52] [52] ZHOU W F, REN X D, YANG Y, et al. Finite element analysis of laser shock peening induced near-surface deformation in engineering metals［J］. Optics & Laser Technology, 2019, 119: 105608.

[53] [53] DING K, YE L. Simulation of multiple laser shock peening of a 35CD4 steel alloy［J］. Journal of Materials Processing Technology, 2006, 178(1-3): 162-169.

[56] [56] PRABHAKARAN S, KALAINATHAN S. Compound technology of manufacturing and multiple laser peening on microstructure and fatigue life of dual-phase spring steel［J］. Materials Science and Engineering: A,2016, 674: 634-645.

[60] [60] LUO X K, DANG N, WANG X. The effect of laser shock peening, shot peening and their combination on the microstructure and fatigue properties of Ti-6Al-4V titanium alloy［J］. International Journal of Fatigue, 2021, 153: 106465.

[61] [61] WU J F, ZOU S K, ZHANG Y K, et al. Microstructures and mechanical properties of β forging Ti17 alloy under combined laser shock processing and shot peening［J］. Surface and Coatings Technology, 2017, 328: 283-291.

[66] [66] KARTHIK D, SWAROOP S. Laser shock peening enhanced corrosion properties in a nickel based Inconel 600superalloy［J］. Journal of Alloys and Compounds, 2017, 694: 1309-1319.

[68] [68] ZHANG H, REN Z C, LIU J, et al. Microstructure evolution and electroplasticity in Ti64 subjected to electropulsing-assisted laser shock peening［J］. Journal of Alloys and Compounds, 2019, 802: 573-582.

[70] [70] WU D X, YAO C F, ZHANG D H. Surface characterization and fatigue evaluation in GH4169 superalloy: Comparing results after finish turning; shot peening and surface polishing treatments［J］. International Journal of Fatigue, 2018, 113: 222-235.

[71] [71] MALEKI E, UNAL O, KASHYZADEH K R. Effects of conventional, severe, over, and re-shot peening processes onthe fatigue behavior of mild carbon steel［J］. Surface and Coatings Technology, 2018, 344: 62-74.

[72] [72] MALEKI E, UNAL O, AMANOV A. Novel experimental methods for the determination of the boundaries between conventional, severe and over shot peening processes［J］. Surfaces and Interfaces, 2018, 13: 233-254.

[76] [76] CHEN Z Y, ZHOU G J, CHEN Z H. Microstructure and hardness investigation of17-4PH stainless steel by laser quenching［J］. Materials Science and Engineering: A, 2012, 534: 536-541.

[78] [78] FENG A X, ZHAO J A, LIN J H, et al. Effect of laser quenching-shock peening strengthening on the microstructure and mechanical properties of Cr12MoV steel［J］. Materials, 2022, 15(19): 6693.