Fig. 1. (a) Schematic diagram of the proposed 2×2 TO switch based on dual PCN cavities. The phase difference between the two arms (Φ1−Φ2) is equal to π. (b) Cross-section view of the coupled region in one half of the proposed 2×2 TO switch.

Fig. 2. (a) Calculated electric field distribution of a single PCN 3W structure at the resonant wavelength based on 2.5D variational FDTD simulation. (b) Simulated transmission spectra of a single PCN 3W structure.

Fig. 3. (a) Micrograph of the fabricated 2×2 TO switch based on dual PCN 3W structures. (b) SEM image of the fabricated PCN 3W structure. (c) Device after wire bonding to a PCB.

Fig. 4. Transmission spectra of a fabricated single PCN 3W structure in through (red solid), drop (green solid), and add (blue dash) ports. Note that the transmissions are normalized to a reference waveguide and the same to the below measured transmission spectra.

Fig. 5. (a) Transmission spectra of the fabricated 2×2 TO switch based on dual PCN 3W structures with the unaligned wavelength state (solid lines) and the aligned wavelength state (lines with symbols). (b) Transmission spectra of the fabricated 2×2 TO switch based on dual PCN 3W structures with a π phase difference at through (red line)/drop (blue line)/add (green line) ports.

Fig. 6. (a) Transmission spectra of the fabricated 2×2 TO switch based on dual PCN 3W structures with various applied powers (P1,P2,P3) at the through ports (solid lines) and the drop ports (lines with symbols). (b) Fitting curve of the resonance wavelength shift of 2×2 TO switch based on dual PCN 3W structures as a function of the applied power.