[5] [5] BISHT M S, GAUR V, SINGH I V. On mechanical properties of SLM Al-Si alloy: Role of heat treatment-induced evolution of silicon morphology［J］. Materials Science and Engineering: A, 2022, 858: 144157.

[6] [6] ZHAO J H, WANG B B, LIU T, et al. Study of in situ formed quasicrystals in Al-Mn based alloys fabricated by SLM［J］. Journal of Alloys and Compounds, 2022, 909: 164847.

[7] [7] ZHAO J H, LUO L S, XUE X A, et al. The evolution and characterizations of Al3(ScxZr1-x) phase in Al-Mg-based alloys proceeded by SLM［J］. Materials Science and Engineering: A, 2021, 824: 141863.

[8] [8] LIU P, HU J Y, LI H X, et al. Effect of heat treatment on microstructure, hardness and corrosion resistance of 7075 Al alloys fabricated by SLM［J］. Journal of Manufacturing Processes, 2020, 60: 578-585.

[9] [9] HOU J C, LI R F, XU C, et al. A comparative study on microstructure and properties of pulsed laser welding and continuous laser welding of Al-25Si-4Cu-Mg high silicon aluminum alloy［J］. Journal of Manufacturing Processes, 2021, 68: 657-667.

[10] [10] HU J Y, LIU P, SUN S Y, et al. Relation between heat treatment processes and microstructural characteristics of 7075 Al alloy fabricated by SLM［J］. Vacuum, 2020, 177: 109404.

[11] [11] TAN Q Y, FAN Z Q, TANG X Q, et al. A novel strategy to additively manufacture 7075 aluminium alloy with selective laser melting［J］. Materials Science and Engineering: A, 2021, 821: 141638.

[12] [12] WANG X Q, CARTER L N, PANG B, et al. Microstructure and yield strength of SLM-fabricated CM247LC Ni-Superalloy［J］. Acta Materialia, 2017, 128: 87-95.

[13] [13] QI T, ZHU H H, ZHANG H, et al. Selective laser melting of Al7050 powder: Melting mode transition and comparison of the characteristics between the keyhole and conduction mode［J］. Materials & Design, 2017, 135: 257-266.

[14] [14] OTANI Y, SASAKI S. Effects of the addition of silicon to 7075 aluminum alloy on microstructure, mechanical properties, and selective laser melting processability［J］. Materials Science and Engineering: A, 2020, 777: 139079.

[15] [15] LEI Z L, BI J A, CHEN Y B, et al. Effect of energy density on formability, microstructure and micro-hardness of selective laser melted Sc-and Zr-modified 7075 aluminum alloy［J］. Powder Technology, 2019, 356: 594-606.

[16] [16] HUANG B, LIU Y Z, ZHOU Z G, et al. Selective laser melting of 7075 aluminum alloy inoculated by Al-Ti-B: Grain refinement and superior mechanical properties［J］. Vacuum, 2022, 200: 111030.

[17] [17] ZHENG T Q, PAN S H, MURALI N, et al. Selective laser melting of novel 7075 aluminum powders with internally dispersed TiC nanoparticles［J］. Materials Letters, 2022, 319: 132268.

[18] [18] BI J A, LEI Z L, CHEN Y B, et al. Microstructure and mechanical properties of a novel Sc and Zr modified 7075 aluminum alloy prepared by selective laser melting［J］. Materials Science and Engineering: A, 2019, 768: 138478.

[19] [19] BI J A, LEI Z L, CHEN Y B, et al. Effect of process parameters on formability and surface quality of selective laser melted Al-Zn-Sc-Zr alloy from single track to block specimen［J］. Optics & Laser Technology, 2019, 118: 132-139.