Photonic Sensors, Volume. 8, Issue 2, 103(2018)

Performance Improvement of Raman Distributed Temperature System by Using Noise Suppression

Jian LI1,2, Yunting LI1,2, Mingjiang ZHANG1,2、*, Yi LIU1,2, Jianzhong ZHANG1,2, Baoqiang YAN1,2, Dong WANG1,2, and Baoquan JIN1,2
Author Affiliations
  • 1Key Laboratory of Advanced Transducers and Intelligent Control System of Ministry of Education, Taiyuan University of Technology, Taiyuan, 030024, China
  • 2College of Physics and Optoelectronics, Institute of Optoelectronic Engineering, Taiyuan University of Technology, Taiyuan, 030024, China
  • show less
    References(19)

    [1] [1] J. P. Dakin, D. J. Pratt, G. W. Bibby, and J. N. Ross, “Distributed optical fibre Raman temperature sensor using a semiconductor light source and detector,” Electronics Letters, 1985, 21(13): 569-570.

    [2] [2] C. Shen, C. Hu, H. Gong, J. Wang, Y. Jin, and Z Zhang, “Distributed optical fiber temperature sensor,” Applied in Underground Coal Gasification System, 2010, 7990: 302-303.

    [3] [3] Y. Liu, T. Lei, Z. H. Sun, C. Wang, and T. Y. Li, “Application of distributed optical fiber temperature system in online monitoring and fault diagnosis of smart grid,” in Proceeding of Asia-Pacific Power and Energy Engineering Conference, Jinan, China, 2012, pp. 27-29.

    [4] [4] A. F. Fernandez, P. Rodeghiero, B. Brichard, and F. Berghmans, “Radiation-tolerant Raman distributed temperature monitoring system for large nuclear infrastructures,” IEEE Transactions on Nuclear Science, 2005, 52(6): 2689-2694.

    [5] [5] J. Park, G. Bolognini, D. Lee, P. Kim, P. Cho, and F. D. Pasquale, “Raman-based distributed temperature sensor with simplex coding and link optimization,” IEEE Photonics Technology Letters, 2006, 18(17): 1879-1881.

    [6] [6] M. Sun, Y. Q. Tang, J. Li, and F. Z. Dong, “Study on spatial resolution improvement of distributed temperature sensor system by linear fitting algorithm,” in Proceeding of the Chinese-Society- for-Optical-Engineering on Applied Optics and Photonics, Beijing, China, 2015, pp. 5-7.

    [7] [7] G. D. B. Vazquez, O. E. Martínez, and D. Kunik “Distributed temperature sensing using cyclic pseudorandom sequences,” IEEE Sensors Journal, 2017, 17(6): 1686-1691.

    [8] [8] M. A. Soto, A. Signorini, T. Nannipieri, S. Bolognini, G. Bolognini, and F. D. Pasquale, “Impact of loss variations on double-ended distributed temperature sensors based on Raman anti-Stokes signal only,” Journal of Lightwave Technology, 2012, 30(8): 1215-1222.

    [9] [9] W. J. Wang, J. Chang, G. P. Lv, Z. L. Wang, Z. Liu, S. Luo, et al., “Wavelength dispersion analysis on fiber-optic Raman distributed temperature sensor system,” Photonic Sensors, 2013, 3(3): 256-261.

    [10] [10] D. Hwang, D. J. Yoon, I. B. Kwon, D. C. Seo, and Y. Chung, “Novel auto-correction method in a fiber-optic distributed-temperature sensor using reflected anti-Stokes Raman scattering,” Optics Express, 2010, 18(10): 9747-9754.

    [11] [11] M. A. Soto, A. Signorini, T. Nannipieri, S. Faralli, and G. Bolognini, “High-performance Raman-based distributed fiber-optic sensing under a loop scheme using anti-stokes light only,” IEEE Photonics Technology Letters, 2011, 23(9): 534-536.

    [12] [12] Z. Qin, L. Chen, and X. Bao, “Continuous wavelet transform for non-stationary vibration detection with phase-OTDR,” Optics Express, 2012, 20(18): 20459-20465.

    [13] [13] C. Y. Ma, T. G. Liu, K. Liu, J. F. Jiang, Z. Y. Ding, X. D. Huang, et al., “A Continuous wavelet transform based time delay estimation method for long range fiber interferometric vibration sensor,” Journal of Lightwave Technology, 2016, 34(16): 3785-3789.

    [14] [14] Y. Hu, W. Q. Mo, K. F. Dong, F. Jin, and J. L. Song, “Using maximum spectrum of continuous wavelet transform for demodulation of an overlapped spectrum in a fiber Bragg grating sensor network,” Applied Optics, 2016, 55(17): 4670-4675.

    [15] [15] X. Feng, X. T. Zhang, C. G. Sun, M. H. Motamedi, and F. Ansari, “Stationary wavelet transform method for distributed detection of damage by fiber-optic sensors,” American Society of Civil Engineers, 2014, 140(4): 04013004-1.04013004-11.

    [16] [16] M. A. Farahani, M. T. V. Wylie, E. Castillo-Guerra, and B. G. Colpitts, “Reduction in the number of averages required in BOTDA sensors using wavelet denoising techniques,” Journal of Lightwave Technology, 2012, 30(8): 1134-1142.

    [17] [17] Z. Wang, J. Chang, S. Zhang, S. Luo, C. Jia, and S. Jiang, “An improved denoising method in RDTS based on wavelet transform modulus maxima,” IEEE Sensors Journal, 2015, 15(2): 1061-1067.

    [18] [18] Z. L. Wang, J. Chang, S. S. Zhang, S. Luo, C. W. Jia, C. W. Jia, et al., “Application of wavelet transform modulus maxima in Raman distributed temperature sensors,” Photonic Sensors, 2014, 4(2): 142-146.

    [19] [19] M. A. Soto, T. Nannipieri, A. Signorini, A. Lazzeri, F. Baronti, R. Roncella, et al., “Raman-based distributed temperature sensor with 1 m spatial resolution over 26km SMF using low-repetition-rate cyclic pulse coding,” Optics Letters, 2011, 36(13): 2557-2559.

    CLP Journals

    [1] Jian Li, Yang Xu, Mingjiang Zhang, Jianzhong Zhang, Lijun Qiao, Tao Wang, "Performance improvement in double-ended RDTS by suppressing the local external physics perturbation and intermodal dispersion," Chin. Opt. Lett. 17, 070602 (2019)

    Tools

    Get Citation

    Copy Citation Text

    Jian LI, Yunting LI, Mingjiang ZHANG, Yi LIU, Jianzhong ZHANG, Baoqiang YAN, Dong WANG, Baoquan JIN. Performance Improvement of Raman Distributed Temperature System by Using Noise Suppression[J]. Photonic Sensors, 2018, 8(2): 103

    Download Citation

    EndNote(RIS)BibTexPlain Text
    Save article for my favorites
    Paper Information

    Category: Regular

    Received: Oct. 27, 2017

    Accepted: Nov. 7, 2017

    Published Online: Aug. 4, 2018

    The Author Email: Mingjiang ZHANG (zhangmingjiang@tyut.edu.cn)

    DOI:10.1007/s13320-017-0474-5

    Topics