[1] Thijs L, Kempen K, Kruth J P et al. Fine-structured aluminium products with controllable texture by selective laser melting of pre-alloyed AlSi10Mg powder[J]. Acta Materialia, 61, 1809-1819(2013).

[2] Kempen K, Thijs L, van Humbeeck J et al. Processing AlSi10Mg by selective laser melting: parameter optimisation and material characterisation[J]. Materials Science and Technology, 31, 917-923(2015).

[3] Wang X, Liu D, Cheng X. Effect of heat treatment process on microstructures and mechanical properties of laser additive manufactured Al-Li alloys[J]. Chinese Journal of Lasers, 45, 0502004(2018).

[4] Wu L Y, Zhao Z Y, Bai P K et al. The effect of silicon phase morphology on microstructure and properties of AlSi10Mg alloys fabricated by selective laser melting[J]. Materials, 15, 8786(2022).

[5] Li X P, Ji G, Chen Z et al. Selective laser melting of nano-TiB2 decorated AlSi10Mg alloy with high fracture strength and ductility[J]. Acta Materialia, 129, 183-193(2017).

[6] Zhao Z Y, Bai P K, Du W B et al. An overview of graphene and its derivatives reinforced metal matrix composites: preparation, properties and applications[J]. Carbon, 170, 302-326(2020).

[7] Zhao Z Y, Bai P K, Li L et al. The reaction thermodynamics during plating Al on graphene process[J]. Materials, 12, 330(2019).

[8] Wu L Y, Zhao Z Y, Bai P K et al. Wear resistance of graphene nano-platelets (GNPs) reinforced AlSi10Mg matrix composite prepared by SLM[J]. Applied Surface Science, 503, 144156(2020).

[9] Wang Y, Zhu C, Lei T. Preparation and properties of graphene reinforced aluminum matrix composites[J]. Materials Science and Engineering of Powder Metallurgy, 23, 518-526(2018).

[10] Zeng X, Teng J, Yu J G et al. Fabrication of homogeneously dispersed graphene/Al composites by solution mixing and powder metallurgy[J]. International Journal of Minerals, Metallurgy, and Materials, 25, 102-109(2018).

[11] Rajeshkumar R, Udhayabanu V, Srinivasan A et al. Microstructural evolution in ultrafine grained Al-graphite composite synthesized via combined use of ultrasonic treatment and friction stir processing[J]. Journal of Alloys and Compounds, 726, 358-366(2017).

[12] Zhao L Y, Lu H M, Gao Z J. Microstructure and mechanical properties of Al/graphene composite produced by high-pressure torsion[J]. Advanced Engineering Materials, 17, 976-981(2015).

[13] Mei S M, Yu D M. On improving the corrosion resistance of Al/SiC composite by excimer laser gas alloying[J]. Chinese Journal of Lasers, 27, 377-380(2000).

[14] Yang Y Q, Wu S B, Zhang Y et al. Application progress and prospect of fiber laser in metal additive manufacturing[J]. Chinese Journal of Lasers, 47, 0500012(2020).

[15] Li Y X, Nie J H, Liang Z G et al. Microstructure evolution and high-temperature oxidation behavior of FeCrAlNbNi alloyed zone prepared by laser surface alloying on 304 stainless steel[J]. Journal of Alloys and Compounds, 888, 161468(2021).

[16] Yoo S J, Han S H, Kim W J. Magnesium matrix composites fabricated by using accumulative roll bonding of magnesium sheets coated with carbon-nanotube-containing aluminum powders[J]. Scripta Materialia, 67, 129-132(2012).

[17] Amirkhanlou S, Ketabchi M, Parvin N et al. Accumulative press bonding; a novel manufacturing process of nanostructured metal matrix composites[J]. Materials & Design, 51, 367-374(2013).

[18] Li X F, Yi D H, Liu B et al. Graphene-strengthened Inconel 625 alloy fabricated by selective laser melting[J]. Materials Science and Engineering: A, 798, 140099(2020).

[19] Shi C, Lei J B, Zhou S F et al. Research progress on continuous fiber-reinforced metal matrix composites and their laser cladding[J]. Laser & Optoelectronics Progress, 54, 060003(2017).

[20] Gu D D, Zhang H M, Chen H Y et al. Laser additive manufacturing of high-performance metallic aerospace components[J]. Chinese Journal of Lasers, 47, 0500002(2020).

[21] Akram J, Chalavadi P, Pal D et al. Understanding grain evolution in additive manufacturing through modeling[J]. Additive Manufacturing, 21, 255-268(2018).

[22] Qiu X W, Liu C G. Microstructure and properties of Al2CrFeCoCuTiNix high-entropy alloys prepared by laser cladding[J]. Journal of Alloys and Compounds, 553, 216-220(2013).

[23] Bourell D, Kruth J P, Leu M et al. Materials for additive manufacturing[J]. CIRP Annals, 66, 659-681(2017).

[24] Dadbakhsh S, Vrancken B, Kruth J P et al. Texture and anisotropy in selective laser melting of NiTi alloy[J]. Materials Science and Engineering: A, 650, 225-232(2016).

[25] Cizek P. The microstructure evolution and softening processes during high-temperature deformation of a 21Cr-10Ni-3Mo duplex stainless steel[J]. Acta Materialia, 106, 129-143(2016).

[26] Lim S C V, Yang K V, Yang Y et al. Tracking microstructure, texture and boundary misorientation evolution of hot deformed and post-deformation annealed Ti-6Al-4V alloy[J]. Materials Science and Engineering: A, 651, 524-534(2016).

[27] Yuan Q H, Zhou G H, Liao L et al. Interfacial structure in AZ91 alloy composites reinforced by graphene nanosheets[J]. Carbon, 127, 177-186(2018).

[28] Han T L, Liu E Z, Li J J et al. A bottom-up strategy toward metal nano-particles modified graphene nanoplates for fabricating aluminum matrix composites and interface study[J]. Journal of Materials Science & Technology, 46, 21-32(2020).

[29] Tian W M, Li S M, Wang B et al. Graphene-reinforced aluminum matrix composites prepared by spark plasma sintering[J]. International Journal of Minerals, Metallurgy, and Materials, 23, 723-729(2016).

[30] Shin S E, Choi H J, Shin J H et al. Strengthening behavior of few-layered graphene/aluminum composites[J]. Carbon, 82, 143-151(2015).

[31] Bisht A, Srivastava M, Kumar R M et al. Strengthening mechanism in graphene nanoplatelets reinforced aluminum composite fabricated through spark plasma sintering[J]. Materials Science and Engineering: A, 695, 20-28(2017).

[32] Jiang Y Y, Xu R, Tan Z Q et al. Interface-induced strain hardening of graphene nanosheet/aluminum composites[J]. Carbon, 146, 17-27(2019).

[33] Wang J Y, Li Z Q, Fan G L et al. Reinforcement with graphene nanosheets in aluminum matrix composites[J]. Scripta Materialia, 66, 594-597(2012).

[34] Li J L, Xiong Y C, Wang X D et al. Microstructure and tensile properties of bulk nanostructured aluminum/graphene composites prepared via cryomilling[J]. Materials Science and Engineering: A, 626, 400-405(2015).

[35] Rashad M, Pan F S, Tang A T et al. Effect of graphene nanoplatelets addition on mechanical properties of pure aluminum using a semi-powder method[J]. Progress in Natural Science: Materials International, 24, 101-108(2014).

[36] Yan S J, Dai S L, Zhang X Y et al. Investigating aluminum alloy reinforced by graphene nanoflakes[J]. Materials Science and Engineering: A, 612, 440-444(2014).

[37] Khodabakhshi F, Nosko M, Gerlich A P. Effects of graphene nano-platelets (GNPs) on the microstructural characteristics and textural development of an Al-Mg alloy during friction-stir processing[J]. Surface and Coatings Technology, 335, 288-305(2018).

[38] Zhou W W, Mikulova P, Fan Y C et al. Interfacial reaction induced efficient load transfer in few-layer graphene reinforced Al matrix composites for high-performance conductor[J]. Composites Part B: Engineering, 167, 93-99(2019).

[39] Jeon C H, Jeong Y H, Seo J J et al. Material properties of graphene/aluminum metal matrix composites fabricated by friction stir processing[J]. International Journal of Precision Engineering and Manufacturing, 15, 1235-1239(2014).

[40] Sharma A, Sharma V M, Sahoo B et al. Effect of multiple micro channel reinforcement filling strategy on Al6061-graphene nanocomposite fabricated through friction stir processing[J]. Journal of Manufacturing Processes, 37, 53-70(2019).

[41] Huang Y, Bazarnik P, Wan D Q et al. The fabrication of graphene-reinforced Al-based nanocomposites using high-pressure torsion[J]. Acta Materialia, 164, 499-511(2019).

[42] Zhang Z W, Liu Z Y, Xiao B L et al. High efficiency dispersal and strengthening of graphene reinforced aluminum alloy composites fabricated by powder metallurgy combined with friction stir processing[J]. Carbon, 135, 215-223(2018).

[43] Li J C, Zhang X X, Geng L. Improving graphene distribution and mechanical properties of GNP/Al composites by cold drawing[J]. Materials & Design, 144, 159-168(2018).

[44] Yang W S, Zhao Q Q, Xin L et al. Microstructure and mechanical properties of graphene nanoplates reinforced pure Al matrix composites prepared by pressure infiltration method[J]. Journal of Alloys and Compounds, 732, 748-758(2018).

[45] Wu Y H, Zhan K, Yang Z et al. Graphene oxide/Al composites with enhanced mechanical properties fabricated by simple electrostatic interaction and powder metallurgy[J]. Journal of Alloys and Compounds, 775, 233-240(2019).

[46] Dixit S, Mahata A, Mahapatra D R et al. Multi-layer graphene reinforced aluminum-manufacturing of high strength composite by friction stir alloying[J]. Composites Part B: Engineering, 136, 63-71(2018).

[47] Tian Y Z, Zhao L J, Park N et al. Revealing the deformation mechanisms of Cu-Al alloys with high strength and good ductility[J]. Acta Materialia, 110, 61-72(2016).