Researching | Perovskite solar cells with NiOx hole-transport layer

Journal of Semiconductors, Volume. 44, Issue 10, 100201(2023)

Perovskite solar cells with NiO_x hole-transport layer

Mengjia Li¹, Zuolin Zhang¹, Jie Sun², Fan Liu⁴, Jiangzhao Chen^3、*, Liming Ding^2、**, and Cong Chen^1,5、***

Author Affiliations

¹State Key Laboratory of Reliability and Intelligence of Electrical Equipment, School of Materials Science and Engineering, Hebei University of Technology, Tianjin 300401, China

²Center for Excellence in Nanoscience (CAS), Key Laboratory of Nanosystem and Hierarchical Fabrication (CAS), National Center for Nanoscience and Technology, Beijing 100190, China

³Key Laboratory of Optoelectronic Technology & Systems (MoE), College of Optoelectronic Engineering, Chongqing University, Chongqing 400044, China

⁴Department of Chemical Engineering, Kansas State University, Manhattan, KS 66506, USA

⁵Macao Institute of Materials Science and Engineering (MIMSE), Macau University of Science and Technology, Macau 999078, China

show less

Full Text Get PDF

Figures&Tables (2)

References (31)

Paper Information

References(31)

[1] Z Li, B Li, X Wu et al. Organometallic-functionalized interfaces for highly efficient inverted perovskite solar cells. Science, 376, 416(2022).

[2] M Luo, X Zong, M Zhao et al. Synergistic effect of amide and fluorine of polymers assist stable inverted perovskite solar cells with fill factor > 83%. Chem Eng J, 442, 136136(2022).

[3] M J Li, H Y Li, Q X Zhuang et al. Stabilizing perovskite precursor by synergy of functional groups for NiOx-based inverted solar cells with 23.5 % efficiency. Angew Chem Int Ed, 61, e202206914(2022).

[4] F Jiang, W C H Choy, X C Li et al. Post-treatment-free solution-processed non-stoichiometric NiO(x) nanoparticles for efficient hole-transport layers of organic optoelectronic devices. Adv Mater, 27, 2930(2015).

[5] H Zhang, J Q Cheng, F Lin et al. Pinhole-free and surface-nanostructured NiOx film by room-temperature solution process for high-performance flexible perovskite solar cells with good stability and reproducibility. ACS Nano, 10, 1503(2016).

[6] J H Lee, Y W Noh, I S Jin et al. A solution-processed cobalt-doped nickel oxide for high efficiency inverted type perovskite solar cells. J Power Sources, 412, 425(2019).

[7] J W Jung, C C Chueh, A K Y Jen. A low-temperature, solution-processable, Cu-doped nickel oxide hole-transporting layer via the combustion method for high-performance thin-film perovskite solar cells. Adv Mater, 27, 7874(2015).

[8] H Zhang, C X Zhao, J X Yao et al. Dopant-free NiOx nanocrystals: A low-cost and stable hole transport material for commercializing perovskite optoelectronics. Angew Chem Int Ed, 62, e202219307(2023).

[9] S H Zhang, H Y Wang, X Duan et al. Printable and homogeneous NiOx hole transport layers prepared by a polymer-network gel method for large-area and flexible perovskite solar cells. Adv Funct Materials, 31, 2106495(2021).

[10] T H Wu, L K Ono, R Yoshioka et al. Elimination of light-induced degradation at the nickel oxide-perovskite heterojunction by aprotic sulfonium layers towards long-term operationally stable inverted perovskite solar cells. Energy Environ Sci, 15, 4612(2022).

[11] W Chen, Y Z Wu, Y F Yue et al. Efficient and stable large-area perovskite solar cells with inorganic charge extraction layers. Science, 350, 944(2015).

[12] W Chen, F Z Liu, X Y Feng et al. Cesium doped NiOx as an efficient hole extraction layer for inverted planar perovskite solar cells. Adv Energy Mater, 7, 1700722(2017).

[13] Y Wei, K Yao, X F Wang et al. Improving the efficiency and environmental stability of inverted planar perovskite solar cells via silver-doped nickel oxide hole-transporting layer. Appl Surf Sci, 427, 782(2018).

[14] W Chen, Y H Wu, J Fan et al. Understanding the doping effect on NiO: Toward high-performance inverted perovskite solar cells. Adv Energy Mater, 8, 1703519(2018).

[15] J K Zhang, W J Mao, X Hou et al. Solution-processed Sr-doped NiOx as hole transport layer for efficient and stable perovskite solar cells. Sol Energy, 174, 1133(2018).

[16] X X Wan, Y N Jiang, Z W Qiu et al. Zinc as a new dopant for NiOx-based planar perovskite solar cells with stable efficiency near 20%. ACS Appl Energy Mater, 1, 3947(2018).

[17] X F Chen, L Xu, C Chen et al. Rare earth ions doped NiOx hole transport layer for efficient and stable inverted perovskite solar cells. J Power Sources, 444, 227267(2019).

[18] D G Hou, J Zhang, X L Gan et al. Pb and Li co-doped NiOx for efficient inverted planar perovskite solar cells. J Colloid Interface Sci, 559, 29(2020).

[19] D Di Girolamo, F Di Giacomo, F Matteocci et al. Progress, highlights and perspectives on NiO in perovskite photovoltaics. Chem Sci, 11, 7746(2020).

[20] X T Dong, G C Wu, G L Cui et al. Boosting efficiency and stability with KBr interface modification for NiOx-based inverted perovskite solar cells. Mater Sci Semicond Process, 160, 107454(2023).

[21] W Chen, Y C Zhou, G C Chen et al. Alkali chlorides for the suppression of the interfacial recombination in inverted planar perovskite solar cells. Adv Energy Mater, 9, 1803872(2019).

[22] S J Wang, Y K Li, J B Yang et al. Critical role of removing impurities in nickel oxide on high-efficiency and long-term stability of inverted perovskite solar cells. Angew Chem Int Ed, 61, e202116534(2022).

[23] C Y Li, Y Zhang, X J Zhang et al. Efficient inverted perovskite solar cells with a fill factor over 86% via surface modification of the nickel oxide hole contact. Adv Funct Mater, 33, 2214774(2023).

[24] X Yin, J F Zhai, P B Ingabire et al. Design of NiOx/carbon heterostructure interlayer to improve hole extraction efficiency of inverted perovskite solar cells. Adv Materials Inter, 8, 2100862(2021).

[25] Y B Lin, Y D Zhang, J X Zhang et al. 18.9% efficient organic solar cells based on n-doped bulk-heterojunction and halogen-substituted self-assembled monolayers as hole extracting interlayers. Adv Energy Mater, 12, 2202503(2022).

[26] Z N Li, Q Tan, G C Chen et al. Simple and robust phenoxazine phosphonic acid molecules as self-assembled hole selective contacts for high-performance inverted perovskite solar cells. Nanoscale, 15, 1676(2023).

[27] J J Sun, C H Shou, J S Sun et al. NiOx-seeded self-assembled monolayers as highly hole-selective passivating contacts for efficient inverted perovskite solar cells. Sol RRL, 5, 2100663(2021).

[28] L D Li, Y R Wang, X Y Wang et al. Flexible all-perovskite tandem solar cells approaching 25% efficiency with molecule-bridged hole-selective contact. Nat Energy, 7, 708(2022).

[29] J Q Zhang, J Yang, R Y Dai et al. Elimination of interfacial lattice mismatch and detrimental reaction by self-assembled layer dual-passivation for efficient and stable inverted perovskite solar cells. Adv Energy Mater, 12, 2103674(2022).

[30] Y S Wang, H Ju, T Mahmoudi et al. Cation-size mismatch and interface stabilization for efficient NiOx-based inverted perovskite solar cells with 21.9% efficiency. Nano Energy, 88, 106285(2021).

[31] H Y Li, C Zhang, C Gong et al. 2D/3D heterojunction engineering at the buried interface towards high-performance inverted methylammonium-free perovskite solar cells. Nat Energy, 8, 946(2023).

Tools

Get Citation

Copy Citation Text

Mengjia Li, Zuolin Zhang, Jie Sun, Fan Liu, Jiangzhao Chen, Liming Ding, Cong Chen. Perovskite solar cells with NiO_x hole-transport layer[J]. Journal of Semiconductors, 2023, 44(10): 100201

Download Citation

EndNote(RIS)BibTex Plain Text

Set citation alerts for article

Save article for my favorites

Paper Information

Category: Articles

Received: Sep. 5, 2023

Accepted: --

Published Online: Dec. 26, 2023

The Author Email:

DOI:10.1088/1674-4926/44/10/100201

Topics

laser devices and laser physics

Lasers and Laser Optics

laser manufacturing

Instrumentation, Measurement and Metrology