[1] [1] Li Meiyan, Han Bin, Gao Ning, et al.. Microstructure, composition and corrosion resistance of laser cladding Fe-based coatings with high hardness[J]. Chinese J Lasers, 2013, 40(5): 0503003

[2] [2] Peilei Zhang, Hua Yan, Chengwu Yao, et al.. Synthesis of Fe-Ni-B-Si-Nb amorphous and crystalline composite coatings by laser cladding and remelting[J]. Surf Coat Tech, 2011, 206(6): 1229-1236.

[3] [3] Xinhong Wang, Min Zhang, Shiyao Qu. Development and characterization of (Ti, Mo) C carbides reinforced Fe- based surface composite coating produced by laser cladding[J]. Opt Laser Eng, 2010, 48(9): 893-898.

[4] [4] Yuan Qinglong, Feng Xudong, Cao Jingjing, et al.. Research progress in laser cladding technology[J]. Mater Rev, 2010, 24(2): 112-116.

[5] [5] Wenyan Gao, Shusen Zhao, Falan Liu, et al.. Effect of defocus manner on laser cladding of Fe-based alloy powder[J]. Surf Coat Tech, 2014, 248(15): 54-62.

[6] [6] J T Hofman, D F Lange, B Pathiraj, et al.. FEM modeling and experimental verification for dilution control in laser cladding[J]. J Mater Process Technol, 2011, 211(2): 187-196.

[7] [7] S Santhanakrishnan, F R Kong, R Kovacevic. An experimentally based thermo-kinetic hardening model for high power direct diode laser cladding[J]. J Mater Process Technol, 2011, 221(7): 1247-1259.

[8] [8] Liu Hao, Yu Gang, He Xiuli, et al.. Three-dimensional numerical simulation of transient temperature field and coating geometry in powder feeding laser cladding[J]. Chinese J Lasers, 2013, 40(12): 1203007.

[9] [9] H E Cheikh, B Courant, S Branchu, et al.. Analysis and prediction of single laser tracks geometrical characteristics in coaxial laser cladding process[J]. Opt Laser Eng, 2012, 50(3): 412-413.

[10] [10] Zhang Qingmao, Zhong Minlin, Yang Sen, et al.. The relationship between the processing parameters and the qualities of the coatings formed by powder feeding laser cladding[J]. Transactions of the China Welding Institution, 2001, 22(4): 51-55.

[11] [11] Huang Yongjun. Characterization of dilution action in laser-induction hybrid cladding[J]. Opt Laser Technol, 2011, 43(2): 965-973.

[12] [12] Gao Shiyou, Li Jian, Li Chenguang, et al.. Research on the variation regularity of single laser tracks cross- section morphology during laser cladding[J]. Chinese J Lasers, 2013, 40(5): 0503010.

[13] [13] C Onwubolu, J P Davim, C Oliveira, et al.. Prediction of clad angle in laser cladding by powder using response surface methodology and scatter search[J]. Opt Laser Technol, 2007, 39(6): 1130-1134.

[14] [14] Zhong Zhao, Zitian Fan, Xuanpo Dong, et al.. Influence of mechanical vibration on the solidification of a lost foam cast 356 alloy[J]. China Foundry, 2010, 7(1): 24-29.

[15] [15] Hongxi Liu, Chuanqi Wang, Xiaowei Zhang, et al.. Improving the corrosion resistance and mechanical property of 45 steel surfaces by laser cladding with Ni60CuMoW alloy powder[J]. Surf Coat Tech, 2013, 228(8): 296-300.

[16] [16] Wang Chuanqi, Liu Hongxi, Zhou Rong, et al.. Characteristic behaviors of particle phases in NiCrBSi-TiC composite coating by laser cladding assisted by mechanical vibration[J]. Acta Metall Sin, 2013, 49(2): 221-228.

[17] [17] Zhang Xiaowei, Liu Hongxi, Jiang Yehua, et al.. Laser in situ synthesized TiN/Ti3Al composite coatings[J]. Acta Metall Sin, 2011, 47(8): 1086-1093.

[18] [18] H J Bartsch. Handbook of Mathematical Formulas[M]. New York: Academic Press, 1974. 528.

[19] [19] Zhenxia Liu. Modeling and numerical simulation on laser remelting and cladding[D]. Xi′an: Northwestern Polytechnical University, 2003: 81-100.

[20] [20] Shengfeng Zhou, Xiaoqin Dai, Haizhong Zheng. Analytical modeling and experimental investigation of laser induction hybrid rapid cladding for Ni-based WC composite coatings[J]. Opt Laser Technol, 2011, 43(6): 613-621.