[1] Wang X Y, Wang Y F, Jiang H et al. Laser cladding forming of round thin-walled parts with slope angle[J]. Chinese Journal of Lasers, 41, 0103006(2014).

[2] Liu Y, Lu J Z, Luo K Y et al. Effect of laser shock processing on tensile property and fracture morphology of CP-Ti under elevated temperature condition[J]. Chinese Journal of Lasers, 43, 0902005(2016).

[3] Hua Y Q, Rong Z, Ye Y X et al. Laser shock processing effects on isothermal oxidation resistance of GH586 superalloy[J]. Applied Surface Science, 330, 439-444(2015). http://www.sciencedirect.com/science/article/pii/S0169433215000446

[4] Sun H, Zhu Y, Guo W et al. Effect of laser shock peening on residual stress and microstructure of TC17 titanium alloy[J]. Laser & Optoelectronics Progress, 54, 041405(2017).

[5] Hu Y X, Yang R Y, Wang D Y et al. Geometry distortion and residual stress of alternate double-sided laser peening of thin section component[J]. Journal of Materials Processing Technology, 251, 197-204(2018). http://www.sciencedirect.com/science/article/pii/S0924013617303904

[6] Luo K Y, Chen Q, Lü C et al. Thickness analysis of two-sided simultaneous laser shock processing on AM50 Mg alloy[J]. Chinese Journal of Lasers, 41, 0103003(2014).

[7] Ivetic G, Meneghin I, Troiani E et al. Fatigue in laser shock peened open-hole thin aluminium specimens[J]. Materials Science and Engineering A, 534, 573-579(2012). http://www.sciencedirect.com/science/article/pii/S0921509311013669

[8] Zhang X Q, Li H, Duan S W et al. Modeling of residual stress field induced in Ti-6Al-4V alloy plate by two sided laser shock processing[J]. Surface & Coatings Technology, 280, 163-173(2015). http://www.sciencedirect.com/science/article/pii/S0257897215302449

[9] Lin B, Zabeen S, Tong J et al. Residual stresses due to foreign object damage in laser-shock peened aerofoils: Simulation and measurement[J]. Mechanics of Materials, 82, 78-90(2015). http://www.sciencedirect.com/science/article/pii/S0167663614002142

[10] Bhamare S, Ramakrishnan G, Mannava S R et al. Simulation-based optimization of laser shock peening process for improved bending fatigue life of Ti-6Al-2Sn-4Zr-2Mo alloy[J]. Surface & Coatings Technology, 232, 464-474(2013). http://www.sciencedirect.com/science/article/pii/S0257897213004957

[11] Hfaiedh N, Peyre P, Song H B et al. Finite element analysis of laser shock peening of 2050-T8 aluminum alloy[J]. International Journal of Fatigue, 70, 480-489(2015). http://www.sciencedirect.com/science/article/pii/S0142112314001686

[12] Fabbro R, Fournier J, Ballard P et al. Physical study of laser-produced plasma in confined geometry[J]. Journal of Applied Physics, 68, 775-784(1990). http://scitation.aip.org/content/aip/journal/jap/68/2/10.1063/1.346783

[13] Kim J S, Nam H S, Kim Y J et al. Numerical study of laser shock peening effects on alloy 600 nozzles with initial residual stresses[J]. Journal of Pressure Vessel Technology, 139, 041406(2017). http://www.researchgate.net/publication/313730860_Numerical_Study_of_Laser_Shock_Peening_Effects_on_Alloy_600_Nozzles_with_Initial_Residual_Stresses

[14] Zhang W W, Yao Y L, Noyan I C. Microscale laser shock peening of thin films, part 1: Experiment, modeling and simulation[J]. Journal of Manufacturing Science and Engineering, 126, 10-17(2004). http://www.researchgate.net/publication/252236148_Microscale_Laser_Shock_Peening_of_Thin_Films_Part_1_Experiment_Modeling_and_Simulation

[15] Zhang X Q, She J P, Li S Z et al. Simulation on deforming progress and stress evolution during laser shock forming with finite element method[J]. Journal of Materials Processing Technology, 220, 27-35(2015). http://www.sciencedirect.com/science/article/pii/S0924013615000060

[16] Hu Y X, Yao Z Q. Overlapping rate effect on laser shock processing of 1045 steel by small spots with Nd∶YAG pulsed laser[J]. Surface & Coatings Technology, 202, 1517-1525(2008). http://www.sciencedirect.com/science/article/pii/S0257897207007025

[17] Qiao H C. Experimental investigation of laser peening on Ti17 titanium alloy for rotor blade applications[J]. Applied Surface Science, 351, 524-530(2015). http://www.sciencedirect.com/science/article/pii/S0169433215012179

[18] Wang B L. Study on the mechanical properties of titanium alloy TC17 and characteristics in machining[D]. Jinan: Shandong University(2013).

[19] Ding K, Ye L[M]. Laser shock peening: Performance and process simulation(2006).

[20] Wang Y N, Fan Y J, Kysar J W et al. Microscale laser peen forming of single crystal[J]. Journal of Applied Physics, 103, 063525(2008). http://ieeexplore.ieee.org/xpl/articleDetails.jsp?arnumber=4946654

[21] Li Y H[M]. The theory and technology of laser shock peening(2013).

[22] Ma D Y, Shen F[M]. Acoustic manual(2004).