[1] Suzuki H, Moriwaki T, Yamamoto Y et al. Precision cutting of aspherical ceramic molds with micro PCD milling tool[J]. CIRP Annals, 56, 131-134(2007).

[2] Guo Z X, Lin Y T, Ye J L et al. Comprehensive experiment on preparation and characterization of polycrystalline diamond/cemented carbide compact based on scientific research practice[J]. Experimental Technology and Management, 35, 186-189(2018).

[3] Stock J W, Zaeh M F, Spaeth J P. Remote laser cutting of CFRP: influence of the edge quality on fatigue strength[J]. Proceedings of SPIE, 8963, 89630T(2014).

[4] Bäuerle D, Himmelbauer M, Arenholz E. Pulsed laser ablation of polyimide: fundamental aspects[J]. Journal of Photochemistry and Photobiology A: Chemistry, 106, 27-30(1997).

[5] Lu R G, Zhang X Y, Cheng X et al. Microstructure formation and evolution mechanism of laser rapid melted nickel based alloy based on composition gradient[J]. Chinese Journal of Lasers, 50, 0402019(2023).

[6] Jia Q N, Lyu W, Yan W et al. Optical manipulation: from fluid to solid domains[J]. Photonics Insights, 2, R05(2023).

[7] Yang W F, Lin D H, Zhong M et al. Simulation of crater morphology of paint at laser single pulse[J]. Chinese Journal of Lasers, 50, 0402016(2023).

[8] Butler-Smith P, Warhanek M, Axinte D et al. The influences of pulsed-laser-ablation and electro-discharge-grinding processes on the cutting performances of polycrystalline diamond micro-drills[J]. CIRP Annals, 65, 105-108(2016).

[9] Odake S, Ohfuji H, Okuchi T et al. Pulsed laser processing of nano-polycrystalline diamond: a comparative study with single crystal diamond[J]. Diamond and Related Materials, 18, 877-880(2009).

[10] Zhang J H. A primary study on laser machining PCD[J]. Journal of Anhui University of Technology, 22-26(1990).

[11] Guo Q, Jia Z X, Gao J Q et al. Technological study on laser cutting of polycrystalline diamond compact[J]. Laser & Infrared, 47, 686-692(2017).

[12] Hou H L, Hao H L, Lü R H et al. Parameter optimization and performance test of laser cutting of carbon fiber reinforced plastics based on response surface method[J]. Laser & Optoelectronics Progress, 59, 1314005(2022).

[13] Chen C S, Tang J Y, He P. Linear regression model restructuring of variance analysis[J]. Statistics & Decision, 34, 71-75(2018).

[14] Nezhad H B, Miri M, Ghasemi M R. New neural network-based response surface method for reliability analysis of structures[J]. Neural Computing and Applications, 31, 777-791(2019).

[15] Ye T, Yang L C, An B et al. Evolution characteristics of multi-point laser-induced plasma in quiescent air[J]. Chinese Journal of Lasers, 50, 0701010(2023).

[16] Gonzalez J J, Fernandez A, Oropeza D et al. Femtosecond laser ablation: experimental study of the repetition rate influence on inductively coupled plasma mass spectrometry performance[J]. Spectrochimica Acta Part B: Atomic Spectroscopy, 63, 277-286(2008).

[17] Li X Y, Zeng X Y, Liu Y et al. Study of YAG laser cutting process with stainless steel sheet[J]. Chinese Journal of Lasers, 28, 1125-1129(2001).

[18] Zhang G X, Hua X M, Li F et al. Effect of laser cleaning process parameters on the surface roughness of 5754-grade aluminum alloy[J]. The International Journal of Advanced Manufacturing Technology, 105, 2481-2490(2019).

[19] Yin Z S, Liu Q, Sun P P et al. Study on nanosecond laser ablation of 40Cr13 die steel based on ANOVA and BP neural network[J]. Applied Sciences, 11, 10331(2021).

[20] Torrisi L, Gammino S, Andò L et al. Comparison of nanosecond laser ablation at 1064 and 308 nm wavelength[J]. Applied Surface Science, 210, 262-273(2003).

[21] Wang D K, Shi J L, Qing Z X. Numerical study of shock wave drag reduction mechanism by nanosecond-pulse laser energy deposition[J]. Infrared and Laser Engineering, 50, 20200253(2021).

[22] Li W Q, Zhang G L, Liao J C et al. Influence of PDC surface texturing using nanosecond-laser on the microstructure[J]. Material Sciences, 11, 194-200(2021).

[23] Wang S W. TiC/Ti6Al4V composites by selective laser melting and microstructure evolution following different heat treatment[D](2022).